1. Additive technologies in industries

1. Аддитивные технологии в фармации : монография / О. А. Терентьева, Д. Н. Маймистов, К. А. Гусев [и др.]. – Москва : КноРус, 2019. – 170 с. – ISBN 978-5-406-07762-7. – https://book.ru/book/933667">URL: https://book.ru/book/933667 (дата обращения: 23.05.2022). – Access mode: for authorization. users. – Text : electronic.

Abstract: This monograph summarizes and systematizes materials on the topic "Additive technologies in pharmacy", presented in domestic and foreign literature. The latest achievements of additive technologies and, in particular, three-dimensional printing in various fields of industry are considered. The classification of methods of additive technologies is presented and their description is given. Examples of applications in the biomedical and pharmaceutical industries are given.

2. Д10-18/59937

Аддитивные технологии в целевом обучении студентов инженерно-технических направлений подготовки : учебное пособие / И. Д. Белоновская, А. И. Сердюк, Е. М. Езерская; К. С. Романенко ; Министерство образования и науки Российской Федерации, Оренбургский государственный университет. – Оренбург : ОГУ, 2018. – 116 с. : ил. – (Новые кадры для оборонно-промышленного комплекса). – ISBN 978-5-7410-1913-9. – Текст : непосредственный.

Abstract: The textbook is intended to familiarize students with industrial additive technologists in the conditions of targeted training. The normative characteristics and features of targeted training of future engineering and technical workers are presented. The basic information about the history and current state of additive technologies in industry and education in Russia and abroad is given.

TO ORDER

3. Антонова, В. С. Новейшие достижения аддитивных технологий : учебное пособие / В. С. Антонова, И. И. Осовская. – Санкт-Петербург : Санкт-Петербургский государственный университет промышленных технологий и дизайна, 2019. – 60 c. – URL: https://www.iprbookshop.ru/102536.html (дата обращения: 23.05.2022). – Access mode: for authorization. users. – Text : electronic.

Abstract: The manual discusses the methods of modern additive technologies, materials for 3D printing, the main developments of additive technologies in the Russian industry and the Federal Target program "Research and Development 2014 – 2020" for the development of domestic additive technologies. The abstracts of the round table "Industry 4.0. Additive Technologies" of the XX Mendeleev Congress on General and Applied Chemistry are presented.

4. Д10-21/94412

Биоактивные имплантаты при лечении псевдоартрозов и дефектов длинных трубчатых костей : монография / А. В. Попков, Д. А. Попков, Н. А. Кононович [и др.] ; под редакцией А. В. Попкова ; Министерство науки и высшего образования Российской Федерации, Национальный исследовательский Томский политехнический университет. – Томск : Изд-во Томского политехнического ун-та, 2021. – 311 с. : ил. – ISBN 978-5-4387-0977-0. – Текст : непосредственный.

Abstract: The monograph supplements information about the possibility of stimulating reparative tissue regeneration in traumatology, the laws of osseointegration of implants made by additive methods, and ways to shorten the treatment of patients with replacement of defects in long tubular bones. A number of new medical technologies using bioactive implants are described for the first time, morphological features of reparative bone regeneration and the biomechanical component of combined osteosynthesis are revealed.

TO ORDER

5. Внедрение аддитивных технологий в литейном производстве авиационной компании «Прогресс» / А. С. Лунев, Д. В. Бушуев, Ю. Ю. Горб, Н. А. Батина. – Text : electronic // Вестник Инженерной школы Дальневосточного федерального университета. – 2016. – № 3. – С. 99-105. – ISSN 2227-6858. – URL: https://reader.lanbook.com/journalArticle/467843#1 (дата обращения: 23.05.2022). – Access mode: for authorization. users.

Abstract: The analysis of the development and implementation of additive technologies in the Arseniev Aviation Company "Progress" named after N. I. Sazykin is given. A method for manufacturing tooling using rapid prototyping units (3D printers), as well as a method for creating sand-polymer molds and rods by selective layer-by-layer bonding is described. A comparative analysis of traditional methods of manufacturing tooling, sand molds and methods using additive technologies is carried out.

6. Ж2-16/60488

Гибсон, Я. Технологии аддитивного производства / Я. Гибсон, Д. Розен, Б. Стакер ; перевод с английского И. В. Шишковского. – Москва : Техносфера, 2016. – 646 с. : ил. – (Мир станкостроения XVII, 1). – ISBN 978-5-94836-447-6. – Текст : непосредственный.

Abstract: The book is devoted to the latest technologies that make it possible to produce physical models based on data on virtual models of solids as a result of fast and easy production processes. The authors of the book are recognized experts in the field of additive technologies with many years of experience and research. The first edition was conceived as a basic textbook that combined all literary sources devoted to the goals and objectives of additive manufacturing (AP). The second edition has been revised and supplemented, new information is included in additional sections and chapters. AP developers and industry representatives will find useful information in this book, as it will help to understand the state of affairs in the industry and indicate opportunities for further research. The publication is also intended for teachers, students and postgraduates studying additive manufacturing, can be used as an autonomous course or as a module in a large program on production technology.

TO ORDER

7. Дорофеева В. В. Аддитивные технологии как инновационный тренд в развитии производства / В. В. Дорофеева. – Text : electronic // Проблемы социально-экономического развития Сибири. – 2020. – . – С. 23-27. – URL: https://www.elibrary.ru/item.asp?id=44069327 (дата обращения 07.06.2022). – Access mode: Scientific Electronic Library eLIBRARY.RU .

Abstract: In the work, based on functional analysis, it is determined that additive technologies are a global industrial trend. The essential features and advantages of additive technologies and additive manufacturing, the problems of their implementation are indicated. An overview of existing 3D printing technologies is presented, and a wide range of their possible applications is described. The place of Russia in the market of additive innovative technologies is determined and recommendations on the directions of development of additive manufacturing in our country are formulated. Conclusions are drawn about the trends in the development of the additive technology industry and its prospects.

8. Д10-20/83139

Евтихиев, Н. Н. Лазерные технологии / Н. Н. Евтихиев, О. Ф. Очин, И. А. Бегунов. – Долгопрудный : Интеллект, 2020. – 237 с. : ил. – ISBN 978-5-91559-281-9. – Текст : непосредственный.

Abstract: Fiber lasers are today the most widespread class of technological lasers in the world, which are equipped with laser technological complexes used in mechanical engineering (automotive, shipbuilding, aviation, machine tool industry), in instrumentation, medicine, oil and gas, chemical industry and other sectors of the economy. Laser radiation is a source of highly concentrated, well-controlled energy capable of effectively affecting materials, providing the implementation of both additive and subtractive technologies for cutting, welding, surfacing, and surface treatment of metals and alloys.

TO ORDER

9. Егоров К. Н. Аддитивные технологии в медицине: области и технологии применения, преимущества, недостатки и перспективы развития / К. Н. Егоров, С. А. Егорова, В. Г. Петрякова. – Text : electronic // Перспективы развития науки в современном мире. Сборник научных статей по материалам VI Международной научно-практической конференции. – Уфа, 2021. – С. 21-41. – URL: https://www.elibrary.ru/item.asp?id=46576315 (дата обращения 07.06.2022). – Access mode: Scientific Electronic Library eLIBRARY.RU .

Abstract: The article is devoted to the study of additive technologies in medicine. Based on the results of the analysis of literary sources, the main 3D printing technologies used in medicine are identified. The data on the basic principles of the application of additive technologies in various fields of medicine are analyzed, structured and presented in the form of a table. Various technologies of application of additive technologies used in medicine for educational and planning purposes (production of organ models), for therapeutic purposes (production of implants, prostheses, orthoses, etc.), in the manufacture of medicines and bioprinting have been studied and analyzed. The main advantages and disadvantages of using 3D printing are analyzed. The prospects of its development for each of the fields of medicine are proposed.

10. Д10-13/3070

Зленко, М. А. Аддитивные технологии в машиностроении : учебное пособие / М. А. Зленко, А. А. Попович, И. Н. Мутылина. – Санкт-Петербург : Изд-во Политехн. ун-та, 2013. – 222 с. : ил. – ISBN 978-5-7422-4025-9. – Текст : непосредственный.

Abstract: The basic information about modern additive and foundry technologies, as well as powder metallurgy technologies are given. The possibilities and prospects of using additive technologies in various industries are described. The historical prerequisites for the emergence of additive technologies are presented. Terminology, classification and characteristics of the additive technologies market are given.

TO ORDER

11. Д10-19/74756

Инновационные разработки в обработке материалов давлением и аддитивном производстве. Качество выпускаемых изделий : материалы Всероссийской научно-технической конференции (г. Москва, 7 декабря 2018 г.) / Министерство науки и высшего образования Российской Федерации, Московский политехнический университет (Московский политех). – Москва : Московский Политех, 2019. – 400 с. : ил. – ISBN 978-5-276-02526-1. – Текст : непосредственный.

Abstract: The collection contains articles by participants of the All-Russian Scientific and Technical conference "Innovative developments in the processing of materials by pressure and additive manufacturing. The quality of manufactured products". The tasks considered in the articles of the collection are currently a priority in mechanical engineering, which is consistent with the trends in the development of modern production. The articles are of interest to scientific and pedagogical workers of higher schools and colleges, graduate students, masters, engineers who specialize in the field of procurement and processing production of mechanical engineering, as well as industry representatives involved in the introduction of promising technologies in modern production.

TO ORDER

12. Каменев, С. В. Технологии аддитивного производства : учебное пособие для СПО / С. В. Каменев, К. С. Романенко. – Саратов : Профобразование, 2020. – 144 c. – ISBN 978-5-4488-0564-6. – URL: https://www.iprbookshop.ru/92180.html (дата обращения: 23.05.2022). – Access mode: for authorization. users. – Text : electronic.

Abstract: The textbook discusses the basic principles and stages of additive manufacturing of prototypes and functional samples of industrial products for various purposes, highlights issues related to the preparation of additive manufacturing. Detailed information is provided on various types of additive processes and technologies currently common in many industries. A brief summary of the characteristics of the most popular types of structural materials used for additive manufacturing of products is given. The textbook can be used in the study of the disciplines "Theoretical foundations of the production of products using additive technologies", "Operation of plants for additive manufacturing" in the specialty of secondary vocational education 15.02.09 "Additive technologies".

13. Д10-18/59284

Кравченко Е. Г. Аддитивные технологии в машиностроении : учебное пособие / Е. Г. Кравченко, А. С. Верещагина, В. Ю. Верещагин ; Министерство образования и науки Российской Федерации, Комсомольский-на-Амуре государственный университет. – Комсомольск-на-Амуре : Комсом.-на-Амуре гос. ун-т, 2018. – 139 с. : ил. – ISBN 978-5-7765-1350-3. – Текст : непосредственный.

Abstract: The manual discusses the basic concepts, the history of development and methods in the field of additive technologies. Recommendations for the use of additive technologies at all stages of the product life cycle are given; real prospects for their development and application in various branches of engineering and technology are considered. It is intended for students studying in the direction of 15.03.05 – "Design and technological support of machine-building industries" profile "Digital production technologies", and will also be useful for students and teachers of most technical specialties.

TO ORDER

14. Ж2-18/65527

Лазерные аддитивные технологии в машиностроении : учебное пособие / А. Г. Григорьянц, И. Н. Шиганов, А. И. Мисюров, Р. С. Третьяков ; под редакцией А. Г. Григорьянца. – Москва : Изд-во МГТУ им. Н. Э. Баумана, 2018. – 278 с. : ил. – ISBN 978-5-7038-4976-7. – Текст : непосредственный.

Abstract: A significant amount of information is presented on the modern high-tech process of additive technologies used in mechanical engineering. Special attention is paid to laser additive technologies of stereolithography, selective laser melting and direct laser deposition of the material. The physical foundations of the processes, their technological features and equipment for industrial implementation are considered.

TO ORDER

15. Мадалиев А. Аддитивные технологии и цифровые двойники: из промышленности в медицину / А. Мадалиев, В. М. Иванов. – Text : electronic // Здоровье – основа человеческого потенциала: проблемы и пути их решения. – Санкт-Петербург: Санкт-Петербургский политехнический университет Петра Великого, 2019. – Т. 14. – № 1. – С. 229-234. – URL: https://www.elibrary.ru/item.asp?id=41851347 (дата обращения 07.06.2022). – Access mode: Scientific Electronic Library eLIBRARY.RU .

Abstract: The article examines the spread of additive technologies and digital twins from industry to medicine at the present time, and identifies the most likely areas of application of these technologies in the future. Examples of their use are described in detail. Based on the results of the study, it is concluded that the nature of medicine has changed under the influence of these technologies.

16. У4205/2020/2

Маренкова, А. В. Применение технологии аддитивного производства в изготовлении игрушек из переработанных термопластиков / А. В. Маренкова, Б. Ю. Сапрыкин, П. А. Петров. – Текст : непосредственный // Климат и природа. – Москва : Сельмашпроект, 2020. – № 2. – С. 42-48.

Abstract: The application of additive manufacturing technologies for the manufacture of toys from biodegradable and eco-friendly thermoplastics is presented. The possibilities of reuse of this material after processing are considered.

TO ORDER

17. М/72867/3

Механика и машиностроение. Наука и практика : материалы международной научно-практической конференции / Министерство науки и высшего образования Российской Федерации, Санкт-Петербургский филиал Научно-исследовательского центра «МашиноСтроение». – Санкт-Петербург : НИЦ МС, 2020. – № 3. – 55 с. – ISSN 2658-6185. – Текст : непосредственный.

Abstract: The materials of the III International Scientific and Practical Conference "Mechanics and Mechanical Engineering. Science and Practice" (December 11, 2020). Conference areas: Problems of higher education in the field of mechanical engineering; Mechanics of deformable solids; Theory of mechanisms and machines; Dynamics and strength of machines; Mechatronics and robotics; Mechanical engineering technology; Machines, aggregates and processes; Additive technologies and production; Economics and organization of machine-building production; Innovative projects in mechanical engineering. The materials can be useful for scientific and engineering workers, doctoral students, postgraduates and students engaged in the study of machines and mechanisms for various technological purposes.

TO ORDER

18. Неустроев Д. В. Аддитивные технологии и их применение в промышленном и транспортном строительстве / Д. В. Неустроев, И. Г. Овчинников. – Text : electronic // Вестник евразийской науки. – 2021. – Т. 13. – № 2. – С. 23. – ISSN: 2588-0101. – URL: https://elibrary.ru/item.asp?id=46335330 (дата обращения 07.06.2022). – Access mode: Scientific Electronic Library eLIBRARY.RU .

Abstract: In our world, the requirements for various industries are growing. The main indicators of production: efficiency, efficiency, quality improvement. To achieve such indicators, it is necessary to reduce costs, rationally use the material and reduce the amount of manual labor in production. The bullet to such results is the optimization of old technologies and the introduction of new ones. One of the new technologies that allows to increase the performance in production is additive technology. This article discusses the problem of using a promising technology – additive printing in the construction of not only industrial and civil buildings, but also transport structures. To identify the problem, the article briefly describes the existing technologies used in 3D printing, types of 3D printing in the world and in construction, and considers examples of the use of this technology in civil construction in Russia and abroad.

19. Д10-21/96667

Новые технологии в машиностроении : сборник научных трудов Всероссийской научной конференции (г. Воронеж, 14-15 октября 2021 г.) / Министерство науки и высшего образования Российской Федерации, Воронежский государственный технический университет. – Воронеж : Изд-во ВГТУ, 2021. – 105 с. : ил. – ISBN 978-5-7731-0998-3. – Текст : непосредственный.

Abstract: The collection of scientific papers of the All-Russian Scientific and Technical Conference "New Technologies in Mechanical Engineering", dedicated to the 85th anniversary of Professor V. P. Smolentsev, held from October 14 to 15, 2021 in Voronezh (Russia) on the basis of the Voronezh State Technical University, presents the results of current scientific and technical developments in the field of modern production and operation technologies mechanical engineering products. The articles of the collection will be useful to engineering workers, specialists, graduate students and students in the field of traditional and non-traditional technologies of production and operation of products.

TO ORDER

20. Д10-17/45350

Оптический контроль в аддитивном производстве : монография / М. А. Дубенская, Т. В. Тарасова, И. В. Жирнов, Д. В. Котобан ; Московский государственный технологический университет «СТАНКИН». – Москва : МГТУ «СТАНКИН», 2017. – 172 с. : ил. – ISBN 978-5-7028-0569-6. – Текст : непосредственный.

Abstract: The monograph discusses the basics of optical control of fast-flowing processes in additive manufacturing technologies using laser radiation. The main regularities of the influence of processing modes on the optical signal and temperature are shown, the basics of estimating and determining the true (actual) temperature are shown, basic information on thermometry is given. The problems in laser processing are considered, techniques and methods of their solution are given, the advantages and disadvantages of various measuring instruments are analyzed.

TO ORDER

21. Д10-20/81098

Основы аддитивных технологий и производств : учебное пособие / М. А. Гейко, И. О. Леушин, А. В. Нищенков [и др.] ; Министерство науки и высшего образования Российской Федерации, Нижегородский государственный технический университет им. Р. Е. Алексеева. – Нижний Новгород : НГТУ, 2020. – 212, [1] с. : ил. – ISBN 978-5-502-01303-1. – Текст : непосредственный.

Abstract: The general characteristics of additive technologies and productions are given, the stages of preparing a digital model for use in additive manufacturing are described. The publication is intended for students of the training direction 22.00.00 "Materials technologies".

TO ORDER

22. Д10-20/85568

Перспективные технологии в машиностроении : учебное пособие для машиностроительных направлений / Т. Г. Насад, М. Ю. Захарченко, А. А. Игнатьев, И. П. Насад ; Министерство науки и высшего образования Российской Федерации, Саратовский государственный технический университет им. Ю. А. Гагарина. – Саратов : Саратовский гос. технический ун-т, 2020. – 101, [2] с. : ил. – ISBN 978-5-7433-3374-5. – Текст : непосредственный.

Abstract: Some modern technologies for manufacturing parts and products in machine and instrument engineering are considered: CALS technologies, mechanical processing, additive technologies, hybrid technologies, etc. The textbook is intended for students of mechanical engineering.

TO ORDER

23. Перспективы использования аддитивных технологий в интересах министерства обороны российской федерации / Д. М. Ненадович, Д. А. Черкасов, И. В. Маркин, М. С. Спирин. – Text : electronic // Военное обозрение. – 2021. – . – С. 64-69. – URL: https://www.elibrary.ru/item.asp?id=47704498 (дата обращения 07.06.2022). – Access mode: Scientific Electronic Library eLIBRARY.RU .

Abstract: The main prospects of using additive technologies for the Ministry of Defense of the Russian Federation are revealed, the essence of each perspective is described in detail. Specific examples of the use of 3D printing and the resulting products are shown, the current state of Russian military additive manufacturing is described.

24. Практический опыт применения аддитивных технологий в отечественном судостроении / А. Ю. Спиридонов, С. М. Ляшенко, А. А. Прохода, П. Г. Зобов. – Text : electronic // Морской вестник. – 2020. – № S1 (14). – С. 90-93. – ISSN: 1812-3694. – URL: https://elibrary.ru/item.asp?id=44333328 (дата обращения 07.06.2022). – Access mode: Scientific Electronic Library eLIBRARY.RU .

Abstract: Examples of the application of additive technologies in the domestic shipbuilding industry are given. The existing developments in terms of building a digital design chain taking into account additive manufacturing are demonstrated. During the design process, the experience of strength calculation of an additive product was applied for the first time, confirmed during practical tests of the product according to the standard program. The comparison of domestic and foreign experience is carried out, differences in approaches to the introduction of additive technologies are shown.

25. Проблема ступенчатого рельефа при изготовлении шестерен по аддитивной технологии листового ламинирования / Н. К. Толочко, П. В. Авраменко, В. Б. Кравцов, Д. И. Копчик. – Text : electronic // Агропанорама. – 2022. – № 1. – С. 2-7. – ISSN 2078-7138. – URL: https://reader.lanbook.com/journalArticle/680216#1 (дата обращения: 23.05.2022). – Access mode: for authorization. users.

Abstract: The article discusses ways to solve the problem of stepped surface relief in the manufacture of various types of gears using additive sheet lamination technology. The features of manufacturing metal cylindrical straight-tooth gears using this technology, implemented according to the "cutting-bundling-connection" scheme, are considered.

26. Ж2-15/60137

Развитие аддитивных принтерных технологий в электронике / В. И. Туев, Н. Д. Малютин, Т. Н. Копылова [и др.] ; под редакцией Н. Д. Малютина ; Томский государственный университет систем управления и радиоэлектроники. – Томск : ТУСУР, 2015. – 68 с. : ил. – ISBN 978-5-86889-706-1. – Текст : непосредственный.

Abstract: An overview of the current state of research on the development of printer technologies in electronics is presented. The features of the technology for producing metal conductors, films of organic semiconductors are described. The classification and brief description of technological equipment for printing with inorganic and organic solutions (inks) are given. The contact method of ink application (plotters), the inkjet printing method (inkjet printers), the solution of the problem of obtaining solutions for the manufacture of organic LEDs are considered. Printing technologies of transport and light-emitting layers, insulating films, conductive metal layers are described. The results of the study of the effect of annealing modes of films applied using a plotter on their electrical parameters are presented. Attention is paid to the means of measuring the parameters of films and functional devices of printed electronics.

TO ORDER

27. Д10-17/76636

Сулейманова, Л. А. Аддитивные технологии в строительстве : учебное пособие / Л. А. Сулейманова, И. А. Погорелова ; Министерство образования и науки Российской Федерации, Белгородский государственный технологический университет им. В. Г. Шухова. – Белгород : Белгородский гос. технологический ун-т (БГТУ) им. В. Г. Шухова, 2017. – 226 с. : ил. – Текст : непосредственный.

Abstract: The textbook discusses the use of additive technologies in modern construction, describes 3D printing materials, including building mixes for a 3D printer, programs for spatial modeling, and presents advanced and domestic experience in additive construction.

TO ORDER

28. Сухочев, Г. А. Технология машиностроения. Аддитивные технологии в подготовке производства наукоемких изделий : учебное пособие / Г. А. Сухочев, С. Н. Коденцев. – Воронеж : Воронежский государственный технический университет, ЭБС АСВ, 2020. – 132 c. – ISBN 978-5-7731-0872-6. – URL: https://www.iprbookshop.ru/108200.html (дата обращения: 23.05.2022). – Access mode: for authorization. users. – Text : electronic.

Abstract: The manual provides basic information on the use of additive technologies in the preparation of production of high-tech engineering products. The publication is intended for students of the directions 15.03.05 "Design and technological support of machine-building industries" (profile "Technology of mechanical engineering"), 15.04.01 "Mechanical Engineering" (master's degree program "Modern production technologies in mechanical engineering") when studying the discipline "Technology of mechanical engineering", specialty 24.05.02 "Design of aircraft and rocket engines" when studying the discipline "Technology manufacturing of parts and assembly of LRE".

29. Тарасова, Т. В. Аддитивное производство : учебное пособие / Т. В. Тарасова. – Москва : ИНФРА-М, 2022. – 196 с. – (Высшее образование). – ISBN 978-5-16-014676-8. – URL: https://znanium.com/catalog/product/1863282 (дата обращения: 23.05.2022). – Access mode: for authorization. users. – Text : electronic.

Abstract: The textbook outlines the basics of additive manufacturing and describes the basic principles of additive technologies; the theoretical and technological foundations of the production of products from polymer and metal materials using additive technologies are considered; the stages of the development of additive manufacturing processes are shown and examples of modern equipment for the manufacture of products using additive technologies are given. Meets the requirements of the federal state educational standards of higher education of the latest generation. It is intended for students of higher educational institutions of mechanical engineering specialties.

30. Д10-18/65060

Технология аддитивного производства, моделирование и управление качеством процесса послойного синтеза : учебное пособие / А. В. Чабаненко, С. А. Назаревич, Я. А. Щеников, А. Ю. Гулевитский ; Министерство образования и науки Российской Федерации, Санкт-Петербургский государственный университет аэрокосмического приборостроения. – Санкт-Петербург : ГУАП, 2018. – 137 с. : ил. – ISBN 978-5-8088-1318-2. – Текст : непосредственный.

Abstract: The publication includes an overview of modern tools for working with additive technologies, which examines the device and principles of operation of the main serial additive installations, the areas of their use and modern capabilities. Recommendations for the use of additive technologies at all stages of the product life cycle are given and the real prospects for their development and application in various branches of engineering and technology are considered. This manual will be useful for students and teachers of most technical specialties.

TO ORDER

31. Д10-19/65382

Технология селективного лазерного спекания в производстве изделий ракетно-космической техники : учебное пособие / Ю. В. Баданина, А. Л. Галиновский, Е. С. Голубев и др. ; Московский государственный технический университет им. Н. Э. Баумана (национальный исследовательский университет). – Москва : Изд-во МГТУ им. Н. Э. Баумана, 2019. – 37 с. : ил. – (Учебно-методическое пособие МГТУ им. Н. Э. Баумана). – ISBN 978-5-7038-5123-4. – Текст : непосредственный.

Abstract: The publication discusses additive technologies in accordance with the classification of ASTM (American Society for Testing and Materials). The characteristic features of the technology of selective laser sintering of polymer powders are described. The prospects for the development of additive technologies in the production of rocket and space technology products are analyzed.

TO ORDER

32. Толочко, Н. К. Аддитивные технологии: проблема ступенчатого рельефа поверхности / Н. К. Толочко, О. В. Сокол. – Text : electronic // Агропанорама. – 2019. – № 2. – С. 12-16. – ISSN 2078-7138. – URL: https://reader.lanbook.com/journalArticle/534964#1 (дата обращения: 23.05.2022). – Access mode: for authorization. users.

Abstract: Additive technologies, or 3D printing technologies, make it possible to create products of complex shapes relatively quickly directly from their computer models, thanks to which they are becoming increasingly common in the production of machine parts. At the same time, these technologies have a number of disadvantages that hinder their widespread use. One of such disadvantages that additive technologies have due to the inherent layered nature of the construction of products is the formation of a stepped relief of inclined or curved surfaces of the parts being created, which is often considered as a very undesirable phenomenon, taking into account the requirements for the quality of parts. This article is devoted to the analysis of the features of the formation and ways to reduce the stepped relief of the surface of parts created using additive technologies. In recent years, increased attention has been paid to the study of these issues, as evidenced by an increasing number of publications on the relevant topic.

33. Тотальное эндопротезирование коленного сустава с использованием виртуального прототипирования и аддитивных технологий / Р. О. Горбатов, Е. Е. Малышев, А. Д. Романов, Н. Н. Карякин. – Text : electronic // Современные технологии в медицине. – 2018. – № 3. – С. 146-154. – ISSN 2076-4243. – URL: https://reader.lanbook.com/journalArticle/504323#1 (дата обращения: 16.06.2022). – Access mode: for authorization. users.

Abstract: The article is devoted to the evaluation of clinical and radiological results of knee arthroplasty using individual guides for positioning resection blocks created using virtual prototyping and 3D printing.

34. Ж2-21/72159

Трубашевский, Д. С. Аддитивные зарисовки, или решения для тех, кто не хочет продолжать терять деньги: более 25 технологий фабрики будущего, автоматизация, допобработка, ПО / Д. С. Трубашевский. – Воронеж : Умное производство, 2021. – 203 с. : ил. – (Легкий старт). – ISBN 978-5-600-02999-6. – Текст : непосредственный.

Abstract: The innovative book by Dmitry Trubashevsky, a recognized expert in the field of additive technologies, presents a coherent and simple description of AT, which will be understandable not only to engineers and representatives of the technical intelligentsia, but also to the ordinary reader who is interested in the world of high technologies. The author considers the world of 3d printing as an integral organism in which many things are interconnected, and each of its organs can be used for the benefit of society. This book will be a source of inspiration for innovators, startups and investors in Russia and the world. And, I hope, it will inspire readers to develop additive technologies in the field of domestic industry.

TO ORDER

35. Д10-20/81656

Туев, В. И. Аддитивные технологии производства устройств радиоэлектроники : учебное пособие / В. И. Туев ; Томский государственный университет систем управления и радиоэлектроники. – Томск : Изд-во ТУСУРа, 2020. – 90 с. : ил. – ISBN 978-5-86889-874-7. – Текст : непосредственный.

Abstract: The basics of technology for producing thin films by printing methods are given. The classification and a brief description of the technological equipment for printing with inorganic and organic solutions of materials (inks) are given. The contact method of ink application (plotters) and contactless printing methods (drip and aerosol printers) are considered. Additive technologies for printing conductive metal layers of the printed circuit board pattern are described, the features of printing technologies for manufacturing organic electronics devices are considered.

TO ORDER

36. Д10-18/55573

Федоренко, В. Ф. Перспективы применения аддитивных технологий при производстве и техническом сервисе сельскохозяйственной техники / В. Ф. Федоренко, И. Г. Голубев ; Российский научно-исследовательский институт информации и технико-экономических исследований по инженерно-техническому обеспечению агропромышленного комплекса. – Москва : Росинформагротех, 2018. – 137 с. : ил. – ISBN 978-5-7367-1403-2. – Текст : непосредственный.

Abstract: The publication examines the state and prospects of the application of additive technologies in the production and repair of agricultural machinery. Special attention is paid to the experience of their use abroad and in various sectors of the economy of the Russian Federation. Additive manufacturing technologies, repair and restoration of agricultural machinery parts are described. It is intended for specialists of service enterprises and organizations of the agro-industrial complex, agricultural engineering; researchers; teachers and university students.

TO ORDER

37. Ар20-5074

Федоров, М. М. Оптимизация конструкций и условий наплавки деталей и узлов газотурбинных двигателей методом аддитивных технологий : специальность 05.07.05 – Тепловые, электроракетные двигатели и энергоустановки летательных аппаратов : автореферат диссертации на соискание ученой степени кандидата технических наук / М. М. Федоров. – Рыбинск, 2020. – 16 с. : ил. – Текст : непосредственный.

TO ORDER

38. Д10-21/89695

Хирургическая, операционная и протезирующая техника : учебное пособие / И. Х. Вахитов, И. С. Рагинов, Н. Ф. Кашапов [и др.] ; под общей редакцией Н. Ф. Кашапова ; Казанский федеральный университет, Инженерный институт, Кафедра биомедицинской инженерии и управления инновациями. – Казань : Изд-во Казанского ун-та, 2021. – 173 с. : ил. – ISBN 978-5-00130-444-9. – Текст : непосредственный.

Abstract: The textbook is intended for the preparation and execution of independent work by students in academic disciplines of the Department of Biomedical Engineering and Innovation Management. The textbook presents materials on the history of the development of surgical, operating and prosthetic equipment. The current state of medical equipment is disclosed in detail. The paper presents the main ways of development and improvement of surgical, operating and prosthetic equipment. The algorithm of designing and creating an innovative medical prototype is revealed in detail. This study is addressed primarily to students of such specialties as "Biomedical equipment, systems and complexes", "Medical and clinical equipment", etc., as well as to a wide range of readers interested in these problems.

TO ORDER

39. Д10-20/83772

Цифровые производственные системы: технологии, моделирование, оптимизация = Digital production systems: technologies, modelling, optimization : монография / А. И. Рудской, К. Н. Волков, Ю. А. Соколов, С. Ю. Кондратьев ; Министерство науки и высшего образования Российской Федерации, Санкт-Петербургский политехнический университет Петра Великого (Политех). – Санкт-Петербург : Политех-Пресс, 2020. – 827 с. : ил. – ISBN 978-5-7422-6665-5. – Текст : непосредственный.

Abstract: The monograph discusses issues related to the organization and management of digital production. Technological and physical features of additive, multiadditive, hybrid and intelligent technologies for obtaining materials and products of complex configuration from metals and alloys are shown. The scientific principles of the development, implementation and application of mathematical models designed to control and optimize technological processes and production systems of layer-by-layer synthesis of powder and composite products are described.

TO ORDER

40. Черепахин, А. А. Процессы формообразования и инструменты : учебник / А. А. Черепахин, В. В. Клепиков. – Москва : КУРС : ИНФРА-М, 2022. – 224 с. – (Среднее профессиональное образование). – ISBN 978-5-906818-43-0. – URL: http://znanium.com/catalog/document/?pid=1817913&id=380135 (дата обращения: 30.06.2022). – Access mode: for authorization. users. – Text : electronic.

Abstract: The textbook is written in accordance with the requirements of the federal state educational standard of secondary vocational education in the specialty 15.02.08 "Engineering technology" of teaching the discipline "Shaping processes and tools". The textbook discusses the methodology of shaping surfaces. The main methods, equipment, tooling and tools used in the shaping of surfaces by blade and abrasive treatment are considered. The main additive technologies used in the formation of products are considered.

41. Д10-20/75057

Электрофизические методы обработки в современной промышленности. Специальный выпуск: аддитивные технологии = Electrophysical machining in modern industry. Special issue: Additive technologies : материалы III Международной научно-практической конференции молодых ученых, аспирантов и студентов, 11-12 декабря 2019 г. / Министерство науки и высшего образования Российской Федерации, Пермский национальный исследовательский политехнический университет. – Пермь : Изд-во Пермского нац. исслед. политехнического ун-та, 2020. – 270 с. : ил. – ISBN 978-5-398-02284-1. – Текст : непосредственный.

Abstract: The results of scientific and technical, experimental design, and implementation work carried out in universities, scientific institutions and industrial organizations on the development of modern mechanical engineering are presented.

TO ORDER

42. Юрасёв, Н. И. О возможностях развития аддитивных технологий в России / Н. И. Юрасёв ; Воронежский государственный университет. – Text : electronic // Современная экономика: проблемы и решения. – 2015. – № 9. – С. 72-79. – ISSN 2078-9017. – URL: https://reader.lanbook.com/journalArticle/288173#1 (дата обращения: 23.05.2022). – Access mode: for authorization. users.

Abstract: Additive manufacturing is the process of joining materials to make parts according to a digital three–dimensional model, usually in layers or without changing its geometry, unlike subtractive or form-changing processes. Additive technologies are recognized by leading countries in the world as the main advanced industrial technologies. The Russian Federation has significantly lagged behind the USA, Japan, Europe, China and Israel in the development of additive technologies. In the world, the idea of additive manufacturing appeared in the 1960s, and the first commercial installation in 1987, while in Russia, the first major project in the field of additive technologies was JSC Center for Additive Technologies, founded on May 16, 2014.

2. 3D modeling and prototyping

43. Аддитивные технологии в дизайне и художественной обработке материалов : учебное пособие для СПО / Е. С. Гамов, В. А. Кукушкина, М. И. Чернышова, И. Т. Хечиашнили. – 2-е изд. – Липецк ; Саратов : Липецкий государственный технический университет, Профобразование, 2021. – 72 c. – ISBN 978-5-00175-028-4, 978-5-4488-0979-8. – URL: https://www.iprbookshop.ru/101612.html (дата обращения: 23.05.2022). – Access mode: for authorization. users. – Text : electronic.

Abstract: The textbook discusses the basics of using additive technologies in the design and artistic processing of materials, describes equipment and materials for ZD printing, as well as the technological process of building a product model using computer graphics and ZD printing. Prepared in accordance with the requirements of the Federal State Educational Standard of Secondary Vocational Education. The textbook will be useful for students of the specialty 15.02.09 "Additive technologies" when studying the discipline "Theoretical foundations of the production of products using additive technologies".

44. У3860/2019/72

Алибекова М. И. Разработка дизайна и концепции капсульной коллекции верхней одежды с внедрением инновационных технологий 3D печати / М. И. Алибекова, В. В. Гетманцева, А. М. Кузнецова. – Текст : непосредственный // Дизайн и технологии. – Москва : РГУ им. А. Н. Косыгина, 2019. – № 72(114). – С.14-19.

Abstract: The article presents an analysis of existing clothing design options created using 3D technologies. Based on the analysis, it is established that the production of 3D clothing is carried out on an individual figure, which makes it difficult to produce products for the population. The design of the proposed models is futuristic, which at this point in time also complicates its implementation in everyday life. The task is to create an optimal design option that allows to expand the scope of 3D technologies in clothing, as well as to unify the production of such products for the population. The concept of the developed design is proposed and sketches of the capsule collection are presented, based on the analysis of modern fashion trends, color solutions, and optimal materials used and 3D printing capabilities. The variants of materials for the production of products are analyzed, based on the analysis of sources related to 3D design. The issue of the implementation and creation of structures of this design continues to be debatable.

TO ORDER

45. Д10-21/87700

Благодинова, В. В. Основы работы в онлайн-3D-редакторе Tinkercad : учебное пособие / В. В. Благодинова ; Нижегородский институт развития образования. – Нижний Новгород : Нижегородский ин-т развития образования, 2021. – 67, [1] с. : ил. – ISBN. 978-5-7565-0916-8. – Текст : непосредственный.

Abstract: The textbook is intended for the study and practical development of methods of 3D modeling and development of industrial design of real objects by means of CAD Tinkercad. The sequence of presentation of theoretical and practical material allows you to independently work out technological techniques for creating graphic primitives, develop the design of a real three-dimensional object. The content of the manual corresponds to the current work program of the training module "Fundamentals of constructing graphic objects using CAD" for students in the DPO system. The manual is intended for specialists who plan to use Tinkercad CAD in their professional activities, technology teachers, teachers of additional education and teachers who carry out educational activities in basic general education programs based on the centers of education of digital and humanitarian profiles "Point of Growth".

TO ORDER

46. Большаков В. П. 3D-моделирование в KOMПAC-3D версий V17 и выше : учебное пособие для вузов. – (Серия «Учебник для вузов») / В. П. Большаков, А. В. Чагина. – Санкт-Петербург : Питер, 2021. – 256 с. – ISBN 978-5-4461-1713-0. – URL: https://ibooks.ru/products/374464 (дата обращения: 11.07.2022). – Access mode: for authorization. users. – Text: electronic.

Abstract: The book discusses the well-known Russian KOMnAC-3D program, the main components of which are the KOMnAC-3D three-dimensional modeling system and the COMPASS-Graph drawing editor. The COMPASS system is constantly being improved, in versions V17 and higher, compared to the previous ones, there have been significant changes in the interface and terms. These changes are reflected in four chapters of the book, which also cover general information about construction based on 2D and 3D technologies. The main advantage of the book is the variety of developed training tasks presented in four chapters and aimed at the formation of skills in 2D and 3D modeling. The specifics of the tasks are revealed in the drawings, which show the sequence of operations associated with the construction of certain images and models. The order of presentation and the content of tasks ensure the gradual and complete development of techniques for creating solid-state models and design documentation of products.

47. Большаков В. П. Основы 3D-моделирования. Изучаем работу в AutoCAD, КОМПАС-3D, SolidWorks, Inventor / В. П. Большаков, А. Л. Бочков. – Санкт-Петербург : Питер, 2013. – 304 с. – ISBN 978-5-496-00041-3. – URL: https://ibooks.ru/products/28649 (дата обращения: 11.07.2022). – Access mode: for authorization. users. – Text: electronic.

Abstract: The book contains materials that allow you to master the work in four CAD systems, the most common in the field of education and practice. Such an approach will not only allow the reader to quickly master modeling skills in all popular CAD shells, but also provide him with the opportunity to independently evaluate and choose a specific tool for solving a particular problem that arises in the work of design engineers. Each part of the book is dedicated to a specific CAD system of the latest version: COMPASS-3D, SolidWorks, Autodesk Inventor and Autodesk AutoCAD. In addition to general information and the basics of creating models of parts in a certain system, techniques for creating solid-state models of parts and drawings using 3D technology are highlighted. The process of visualization of the stages of creating solid-state models is considered. It is recommended by the Educational and Methodological Association of universities of the Russian Federation for education in the field of radio engineering, electronics, biomedical engineering and automation as a textbook for students of higher educational institutions studying in the direction 211000 "Design and technology of electronic means".

48. Бучельникова, Т. А. Основы 3D моделирования в программе Компас : учебно-методическое пособие / Т. А. Бучельникова. – Тюмень : Государственный аграрный университет Северного Зауралья, 2021. – 60 c. – URL: https://www.iprbookshop.ru/110161.html (дата обращения: 28.06.2022). – Access mode: for authorization. users. – Text : electronic.

Abstract: The textbook is intended to help students in performing practical and independent work, studying the discipline of 3D modeling, studying in the field of training 35.03.02 "Technology of logging and wood processing industries", profile "Woodworking technology", full-time and part-time education Recommended for publication by the methodological commission of the Institute of Engineering and Technology dated 04/29/2021, Protocol No. 7.

49. Д10-17/44849

Варакин А. А. Трехмерное моделирование конструкций электронных средств в САПР SolidWorks : практикум / А. А. Варакин ; Владимирский государственный университет им. А. Г. и Н. Г. Столетовых. – Владимир : ВлГУ, 2017. – 87 с. : ил. – ISBN 978-5-9984-0782-6. – Текст : непосредственный.

Abstract: The publication is aimed at studying the tools of work in the SolidWorks computer-aided design system. The issues related to the peculiarities of the development of three-dimensional models of parts and assemblies of electronic products in SolidWorks are considered. It is intended for full-time and distance learning students of the directions 11.03.03 "Design and technology of electronic means", 12.03.04 "Biotechnical systems and technologies" in the study of the disciplines "Automation systems of electronic means design", "Electronic means design", in course design and in the performance of final qualifying work.

TO ORDER

50. Виртуальное моделирование, прототипирование и промышленный дизайн : материалы VII Международной научно-практической конференции (г. Тамбов, 12-14 октября 2021 г.) / ФГБОУ ВО «Тамбовский государственный технический университет». – Тамбов : Издательский центр ФГБОУ ВО «ТГТУ», 2021. – Выпуск 7. – 331с. – ISBN 978-5-8265-2400-8. – URL: https://elibrary.ru/item.asp?id=47155805 (дата обращения 28.06.2022). – Access mode: Scientific Electronic Library eLIBRARY.RU . – Text : electronic.

Abstract: The purpose of the conference is to discuss and publish scientific achievements of scientists, as well as to identify possible ways to solve problems of developing methods and algorithms for creating and using virtual models and prototypes of objects of various purposes and complexity.

51. Д10-21/85989

Воруничев, Д. С. Конструкторско-технологическое проектирование радиоэлектронных средств в САПР Delta Design : учебное пособие / Д. С. Воруничев, М. С. Костин, Д. А. Гладкий ; Министерство науки и высшего образования Российской Федерации, МИРЭА – Российский технологический университет. – Москва : МИРЭА – Российский технологический ун-т, 2021. – 120 с. : ил. – ISBN 978-5-7339-1564-7. – Текст : непосредственный.

Abstract: The tutorial outlines the full route of designing and modeling devices on printed circuit boards in the modern domestic computer-aided design system Delta Design Professional. The paperless digital design and modeling of electronic devices discussed in the manual includes the prototyping stage of the developed PCB design on the ProtoMat S63 milling and drilling machine with the release of production files directly from Delta Design. The textbook is intended for second-year students studying the discipline "Design and technological design of radio-electronic means" and students in the field of training 11. 11.03.01 "Radio Engineering" and specialty 11.05.01 "Radio-electronic systems and complexes".

TO ORDER

52. Д10-17/49031

Гайсина, С. В. Робототехника, 3D-моделирование, прототипирование. Реализация современных направлений в дополнительном образовании : методические рекомендации для педагогов / С. В. Гайсина, И. В. Князева, Е. Ю. Огановская. – Санкт-Петербург : КАРО, 2017. – 204 с. : ил. – (Педагогический взгляд). – Загл. обл. : Робототехника, 3D-моделирование и прототипирование в дополнительном образовании. Реализация современных направлений. – ISBN 978-5-9925-1251-9. – Текст : непосредственный.

Abstract: The manual provides methodological recommendations for the implementation of modern trends in additional education, reveals the issues of the organization of additional education and the design of additional general development programs in the areas of "Robotics", "ZD-modeling", "Prototyping", presents methodological aspects of their implementation.

TO ORDER

53. Гладышева О. А. Аддитивные технологии в дизайне / О. А.Гладышева, С. С. Тигишвили. – Text : electronic // Информационные и коммуникативные технологии. Проектная деятельность в образовательном и информационно-коммуникативном процессе: опыт и перспективы : сборник научных статей по материалам III Всероссийской научно-практической конференции с международным участием. – 2020. – С. 143-146. – URL: https://www.elibrary.ru/item.asp?id=42641819 (дата обращения 07.06.2022). – Access mode: Scientific Electronic Library eLIBRARY.RU .

Abstract: Progressive designers, designers, prove that environmental design can contribute to an eco-friendly future. Conscious consumption is the main trend of recent times: people around the world reflect on the impact of human activity on the environment, as well as on the choice for the well–being of future generations.

54. Ар19-1129

Гусев, Д. В. Повышение показателей качества изготавливаемых изделий при использовании технологии быстрого прототипирования : специальность 05.02.08 – Технология машиностроения : автореферат диссертации на соискание ученой степени кандидата технических наук / Д. В. Гусев. – Ульяновск, 2019. – 19 с. : ил. – Текст : непосредственный.

TO ORDER

55. Ж2-19/65915

Жарков Н. В. Компас-3D. Полное руководство: от новичка до профессионала / Н. В. Жарков, М. А. Минеев, М. В. Финков. – 2-е изд. – Санкт-Петербург : Наука и техника, 2019. – 656 с. : ил. – (Полное руководство). – ISBN 978-5-94387-774-2. – Текст : непосредственный.

Abstract: The book is the second edition of the manual on working with the COMPASS-3D computer-aided design system: two-dimensional and three-dimensional design is considered from A to Z. The best choice for anyone who wants to master working with this program from scratch and learn how to draw, build models, design on a computer.

TO ORDER

56. Забелин, Л. Ю. Компьютерная графика и 3D-моделирование : учебное пособие для СПО / Л. Ю. Забелин, О. Л. Штейнбах, О. В. Диль. – Саратов : Профобразование, 2021. – 258 c. – ISBN 978-5-4488-1188-3. – URL: https://www.iprbookshop.ru/106619.html (дата обращения: 28.06.2022). – Access mode: for authorization. users. – Text : electronic.

Abstract: The textbook outlines the basics of computer graphics and three-dimensional modeling, considers raster and vector graphics, color models, coordinate and affine transformations of objects. The models of lighting, tracing and shading are given, the technology of object visualization is described in detail. The practical implementation of the theoretical provisions is shown by the example of the widely used 3D MAX program. The textbook is intended for students of all specialties and professions of secondary vocational education, whose curricula provide for the study of the disciplines "Computer graphics and 3D modeling", "Computer graphics", "3D modeling".

57. Загоруйко, М. Г. Оптимизация геометрических параметров элементов строительных конструкций на этапе их проектирования с помощью технологий 3d-прототипирования / М. Г. Загоруйко, М. С. Елисеев, В. В. Васильчиков. – Text : electronic // Аграрный научный журнал. – 2017. – № 1. – С. 45-48. – ISSN 2313-8432. – URL: https://reader.lanbook.com/journalArticle/361533#1 (дата обращения: 28.06.2022). – Access mode: for authorization. users.

Abstract: The design using 3D prototyping technologies of the boom of a front loader of the PKU-08 type is considered. A parametric equation describing the dependence of the force on the rod of the power hydraulic cylinder on its geometric parameters was obtained, on the basis of which the dependence of the force F Hz on the magnitude of the load being lifted Q and the height of the boom of the loader was constructed.

58. Д10-18/56607

Инженерная графика и трехмерное моделирование : молодежная научно-практическая конференция, 20 декабря 2017 года : сборник научных докладов / Сибирский государственный университет геосистем и технологий (СГУГиТ). – Новосибирск : СГУГиТ, 2018. – 69 с. : ил. – ISBN 978-5-907052-00-0. – Текст : непосредственный.

Abstract: The collection contains scientific reports of students, undergraduates, postgraduates of higher educational institutions who participated in the youth scientific and practical conference "Engineering graphics and three-dimensional modeling".

TO ORDER

59. Ж2-21/68694

Клайн, Л. С. Make: Fusion 360. 3D-моделирование для мейкеров. Проекты для 3D-принтеров и ЧПУ / Л. С. Клайн; перевод с английского. – Санкт-Петербург : БХВ-Петербург, 2021. – 287 с. : ил. – Перевод изд.: Make: Fusion 360 for makers. Design your own digital models for 3D printing and CNC fabrication / Cline, L. S. – San Francisko, 2018. – ISBN 978-5-9775-4064-3. – Текст : непосредственный.

Abstract: The book is written for novice users by an experienced teacher and will help you quickly start creating models for 3D printing. It contains: An easy-to-understand guide to Fusion 360, DIY projects with step-by-step instructions and color illustrations, Projects tested in real conditions and demonstrating solutions to the most common problems.

TO ORDER

60. Ар21-6842

Колчин, П. В. Влияние структурных изменений в заготовках из конструкционных сталей, полученных 3D печатью электродуговой наплавкой, на хладостойкость и механические свойства : 2.6.1 – Металловедение и термическая обработка металлов и сплавов : автореферат диссертации на соискание ученой степени кандидата технических наук / П. В. Колчин ; Нижегородский государственный технический университет им. Р. Е. Алексеева. – Нижний Новгород, 2021. – 16 с. : ил. – Текст : непосредственный.

TO ORDER

61. Лабораторный практикум по курсу «3d-моделирование и прототипирование изделий» : учебно-методическое пособие / А. Н. Сергеев, С. Н. Кутепов, А. В. Сергеева [и др.]. – Тула : Издательство: Тульский государственный университет, 2018. – 162 с. – URL: https://www.elibrary.ru/item.asp?id=36697680 (дата обращения 28.06.2022). – Access mode: Scientific Electronic Library eLIBRARY.RU . – Text : electronic.

Abstract: This publication has been developed in accordance with the requirements of the Federal State Educational Standard of Higher Education in the field of training 44.04.01 Pedagogical education (Master's degree level) and it is part of the educational and methodological complex of the discipline "3D modeling and prototyping of products". The manual includes methodological recommendations for performing laboratory work, as well as the necessary educational and methodological materials for students' independent work. Methodological recommendations for laboratory work include practical tasks and establish the procedure for performing work aimed at acquiring and consolidating knowledge, skills and abilities for the formation of competencies necessary in future professional activity.

62. Д10-21/91374

Левитан, Б. А. Проектирование сложных радиотехнических систем в Altium designer и AUTOCAD : учебное пособие / Б. А. Левитан, Д. А. Сударенко ; Министерство науки и высшего образования Российской Федерации, Московский авиационный институт (национальный исследовательский университет). – Москва : Доброе слово и Ко, 2021. – 102 с. : ил. – ISBN 978-5-394-03005-5. – Текст : непосредственный.

Abstract: This tutorial introduces complex technical systems and the order of their design in Altium Designer and AutoCAD. It contains the requirements for the design documentation, provides the necessary terminology and definitions, sets out the rules for graphic design of printed circuit boards and drawings. The textbook is intended for students studying the discipline "Computer-aided design System" (CAD) in the specialty "Design, production and operation of rockets and rocket and space complexes".

TO ORDER

63. Д10-21/91030

Лисяк, В. В. Основы компьютерной графики: 3D-моделирование и 3D-печать : учебное пособие / В. В. Лисяк ; Министерство науки и высшего образования Российской Федерации, Южный федеральный университет, Инженерно-технологическая академия. – Ростов-на-Дону ; Таганрог : Изд-во Южного федерального ун-та, 2021. – 107, [1] с. : ил. – ISBN 978-5-9275-3825-6. – Текст : непосредственный.

Abstract: The manual discusses the categories of 3D printers, their manufacturers and modern 3D printing technologies. The article presents material on methods and means of creating 3D models of arbitrary objects and provides an analytical overview of modern available software that provides a solution to the problem of creating 3D models. The textbook is intended for students of all forms of education in the following areas: "Computer Science and computer Engineering", "Information systems and technologies" and "Applied Computer Science".

TO ORDER

64. Моделирование и виртуальное прототипирование : учебное пособие / И. И. Косенко, Л. В. Кузнецова, А. В. Николаев, А. В. Олейник. – Москва : Альфа-М, ИНФРА-М Издательский Дом, 2016. – 176 с. – (Технологический сервис). – ISBN 978-5-98281-280-3. – URL: https://znanium.com/catalog/product/555214 (дата обращения: 16.06.2022). – Access mode: for authorization. users. – Text : electronic.

Abstract: The problems of designing (three-dimensional geometric modeling) of machine parts: shafts, gears, and other elements of gearboxes are considered. The methods of virtual prototyping in the CAD/CAM/CAE CATIA V5 system based on solid-state modeling of products of complex geometric shape are presented.

65. Ж2-20/67878

Никонов, В. Компас-3D: создание моделей и 3D-печать / В. Никонов. – Санкт-Петербург [и др.] : Питер, 2020. – 207 с. : ил. – ISBN 978-5-4461-1456-6. – Текст : непосредственный.

Abstract: COMPASS-3D is a powerful, constantly improving CAD system, maximally adapted to Russian standards. Model planes and trucks, buses and tanks, motorcycles and helicopters, assemble gliders or copters, create models of cars of your dreams. The system supports 3D printers, so you can easily get a real object from a three-dimensional model and bring the idea to life! Moving from simple to complex, you will learn how to create models for subsequent 3D printing and get acquainted with all the features of this process. First, you will master the 3D printing technology itself and the settings for saving CAD models to Stl format, as well as converting Stl using a slicer program into a G-code command language understandable to the printer. Next, you will find eight lessons with detailed examples of modeling models prepared for 3D printing in COMPASS-3D CAD.

TO ORDER

66. Д10-21/92308

Парфенова, М. Д. Разработка технических заданий для прототипирования разборных T-x-y диаграмм (Excel+AutoCAD технология) : учебно-методическое пособие / М. Д. Парфенова, М. В. Ламуева, В. И. Луцык ; Министерство науки и высшего образования Российской Федерации, Бурятский государственный университет им. Доржи Банзарова. – Улан-Удэ : Изд-во Бурятского государственного университета, 2021. – 56 с. : ил. – ISBN 978-5-9793-1615-4. – Текст : непосредственный.

Abstract: The tutorial contains eight main sections devoted to the development of technology for using the AutoCAD graphics package and Excel spreadsheet processor to build 3D models of phase diagrams and the development of technical specifications for prototyping collapsible T-x-y diagrams. The manual is intended for students in the areas of training 04.04.01 "Chemistry", 05.04.01 "Geology", 05.04.06 "Ecology and nature management", graduate students and teachers.

TO ORDER

67. Д10-21/92423

Подкопаев, С. А. Аддитивные технологии и прототипирование : учебно-методическое пособие / С. А. Подкопаев, Э. Б. Демишкевич ; Московский государственный технический университет им. Н. Э. Баумана (национальный исследовательский университет). – Москва : Изд-во МГТУ им. Н. Э. Баумана, 2021. – 48, [3] с. : ил. – (Учебно-методическое пособие МГТУ им. Н. Э. Баумана). – ISBN 978-5-7038-5642-0. – Текст : непосредственный.

Abstract: The systems of additive technologies and prototyping are considered, the basics of practical work on creating 3D molels and printing them on a 3D printer are described. Four laboratory works on the course "Additive technologies and prototyping" are presented. For students of Bauman Moscow State Technical University studying in the master's degree in the areas of training 15.04.01-08 "Mechanical Engineering – Design of mechanisms of machines and mechatronic devices" and 15.04.01-09 "Mechanical Engineering – Engineering and intralogistics".

TO ORDER

68. Ж2-18/65751

Прототипирование : учебно-методическое пособие / Н. С. Махонин, И. М. Бритков, Л. Н. Пикина, С. В. Шиповская ; под редакцией Т. Ю. Соколовой ; Министерство образования и науки Российской Федерации, Национальный исследовательский университет «МИЭТ». – Москва : МИЭТ, 2018. – 52 с. : ил. – Текст : непосредственный.

Abstract: The training manual contains information about the organization of the educational process for the course "Prototyping". The content of training sessions, tasks for independent work of students, forms of control over the development of the material are considered. The manual is part of the UMK "Robofootball".

TO ORDER

69. Д10-19/82811

Пузанов, А. В. Генеративный дизайн и аддитивные технологии в гидроприводостроении : монография / А. В. Пузанов ; Министерство образования и науки Российской Федерации, Ковровская государственная технологическая академия им. В. А. Дегтярева. – Ковров : КГТА им. В. А. Дегтярева, 2019. – 59 с. : ил. – ISBN 978-5-86151-665-5. – Текст : непосредственный.

Abstract: The monograph describes modern methods and trends in the development and production of hydraulic drives. The basic principles and common models of topological optimization, generative (bionic) design are considered. Examples of the implementation of generative design in hydraulic engineering are given. For students, undergraduates and postgraduates, as well as engineering, technical and scientific workers engaged in the study, design and production of hydraulic drives, development and maintenance of products using hydraulic drive.

TO ORDER

70. Сибагатуллин Р. А. Особенности изучения 3д-моделирования в вузе / Р. А. Сибагатуллин. – Text : electronic // Вестник Совета молодых учёных и специалистов Челябинской области. – 2022. – Т. 1. – № 1 (36). – С. 42-45. – ISSN: 2308-2127. – URL: https://www.elibrary.ru/item.asp?id=48366767 (дата обращения 28.06.2022). – Access mode: Scientific Electronic Library eLIBRARY.RU .

Abstract: This article discusses the features of teaching 3D modeling to students at universities. Competencies and specialties related to the modeling of three-dimensional models were considered. Graphic editors designed to work with 3D models are demonstrated. The analysis of the software intended for 3D modeling is carried out. The courses presented on online educational platforms were also reviewed and analyzed.

71. Д10-19/87785

Смирнова, Л. А. Цифровые 3D-технологии в инженерной графике : учебное пособие / Л. А. Смирнова, Р. Н. Хусаинов, В. В. Сагадеев ; Министерство науки и высшего образования Российской Федерации, Казанский национальный исследовательский технологический университет. – Казань : Изд-во КНИТУ, 2019. – 143, [1] с. : ил. – ISBN 978-5-7882-2660-6. – Текст : непосредственный.

Abstract: The main provisions of the concept of information support for the life cycle of mechanical engineering products are outlined. The stages of the life cycle and information systems automating this process are described. Modern technologies for creating electronic design documents based on updated ESKD standards and national standards of the GOST R series are considered. The basics of additive technologies and their classification models are outlined. An overview of modern approaches in teaching geometric and graphic disciplines is given. It is intended for students of all engineering fields studying the use of modern technologies in the design and development of design documentation. Prepared at the Department of Engineering Computer Graphics and Computer-aided Design.

TO ORDER

72. Д10-20/82297

Сорокин, А. Н. Технологии изготовления моделей на 3D принтере : учебное пособие / А. Н. Сорокин, Е. В. Сухорукова ; Саратовский национальный исследовательский государственный университет им. Н. Г. Чернышевского. – Москва : Перо, 2020. – 79 с. : ил. – ISBN 978-5-00171-526-9. – Текст : непосредственный.

Abstract: Printing on a 3D printer is a fairly simple process, if you follow the rules for working with different types of materials and with specific printer models, but with its own subtleties. To avoid unforeseen difficulties in the printing process, you should carefully study the 3D model before uploading the file to the 3D printer. The features of preparing models in various programs for their subsequent printing using Wanhao 3D printers are considered. The manual can be used by students and teachers to create various three-dimensional models using programs and 3D.

TO ORDER

73. Д10-21/96840

Чевычелов, С. А. Основы моделирования в Компас-3D для школьников / С. А. Чевычелов, Е. Г Коржавина ; Полевской лицей [и др.]. – Курск : ЮЗГУ, 2021. – 59 с. : ил. ISBN 978-5-907512-36-8. – Текст : непосредственный.

Abstract: The tutorial gives the reader an overview of the basics of 3D modeling. The Compass-3D program is considered as a development environment, which describes the working interface of this program and the configuration of the working environment. For general acquaintance with 3d modeling, the manual discusses the use of libraries of materials, their application to model surfaces, as well as basic concepts: primitive parametric objects, global and local coordinate systems, object positioning, parameter changes. Separate chapters are devoted to the process of creating 3d models based on flat shapes. Completing the training tasks of the workshop forms the skills and abilities in geometric modeling, additive technologies and volumetric printing. When creating this tutorial, the tasks of the Junior Skills championship were used.

TO ORDER

74. Чистяков, А. В. Интерактивное виртуальное прототипирование в архитектурном проектировании / А. В. Чистяков. – Text : electronic // Вестник Южно-Уральского государственного университета. Серия: Строительство и архитектура. – 2017. – № 4. – С. 74-78. – ISSN 1991-9743. – URL: https://reader.lanbook.com/journalArticle/465902#1 (дата обращения: 28.06.2022). – Access mode: for authorization. users.

Abstract: Based on the results of the conducted research, the features of the use of interactive virtual prototyping systems in the design of the architectural environment are revealed. The most developing directions of computer modeling in architectural design are revealed. The main types of modern virtual prototyping systems are proposed. The aspect of interactivity in architectural design, presentation of architectural developments and application of augmented reality systems is considered. An example of a physically correct representation of an architectural project is presented. Trends in the development of virtual reality systems in the design of the architectural environment are revealed.

75. Д10-21/96369

Шигапов, А. И. Технологии быстрого прототипирования : учебно-методическое пособие для учащихся СУНЦ КНИТУ-КАИ / А. И. Шигапов ; Министерство науки и высшего образования Российской Федерации, Казанский национальный исследовательский технический университет им. А. Н. Туполева – КАИ, Инженерный лицей КНИТУ-КАИ. – Казань : Изд-во КНИТУ-КАИ, 2021. – 40, [3] с. : ил. – (Технология). – ISBN 978-5-7579-2586-8. – Текст : непосредственный.

Abstract: The Autodesk Inventor computer-aided design system allows you to create structures and mechanisms of varying complexity in the shortest possible time due to the clarity of the creation process. There is no more need to scroll through everything in your head, imagining how your product will look in its finished form. You will see this on your monitor even before the drawings are published and sent to production. Besides. You will be able to perform the calculation of the mechanism and select the appropriate materials. Designed to learn the basics when working in the Autodesk Inventor computer-aided design system, it is the first part of the course "Rapid Prototyping Technology".

TO ORDER

3. Materials of additive technologies

76. Д10-21/99475

Адаптивные материалы и покрытия для высокотехнологичных отраслей промышленности: школа молодых ученых, 24-25 ноября 2021 года : [коллективная монография] / А. А. Верещака, Ф. О. Милович, Н. В. Андреев и др. ; под редакцией С. Н. Григорьева ; Министерство образования и науки Российской Федерации, Московский государственный технологический университет «СТАНКИН», Российский научный фонд. – Москва : МГТУ «СТАНКИН», 2021. – 182 с. : ил. – Загл. обл. : Школа молодых ученых «Адаптивные материалы и покрытия для высокотехнологичных отраслей промышленности». – ISBN 978-5-7028-0682-2. – Текст : непосредственный.

Abstract: The monograph presents an overview of the results of studies of the operational properties of adaptive materials and coatings, as well as technologies for obtaining products from these materials and modifying their surface properties. The collective monograph "Adaptive materials and coatings for high-tech industries", which is the result of the eponymous School of Young Scientists in 2021 with the assistance of the Russian Science Foundation as part of the project under Agreement No. 21-79-30058 "Development of scientific principles and innovative technologies based on plasma processes for the production of products with controlled adaptive response to external influences in order to apply in machining, functional units of machines and aggregates" in the direction "H1 – Transition to advanced digital, intelligent manufacturing technologies, robotic systems, new materials and methods of construction, creation of systems for processing large amounts of data, machine learning and artificial intelligence" of scientific and technological development of the Russian Federation.

TO ORDER

77. Ж2-17/62119

Аддитивные технологии : учеб. пособие / А. И. Рудской, А. А. Попович, А. В. Григорьев, Д. Е. Каледина ; Санкт-Петербургский. политехнический университет Петра Великого. – Санкт-Петербург : Изд-во Политехн. ун-та, 2017. – 251 с. : ил. – Загл. обл. : Аддитивные технологии 3D. – ISBN 978-5-7422-5589-5. – Текст : непосредственный.

Abstract: The analysis of the current state of the issue in the field of materials, technologies and equipment for the production of products using additive technologies is carried out. The existing methods of obtaining products using additive technologies, promising materials that are used in these technologies, as well as existing equipment in this area are described.

TO ORDER

78. Д10-20/79506

Аддитивное формообразование на основе технологии электронно-лучевой наплавки с подачей присадочной проволоки : монография / А. В. Щербаков, Д. А. Гапонова, А. П. Слива [и др.]. – Москва : Изд-во Спутник+, 2020. – 224 с. : ил. – ISBN 978-5-9973-5498-5. – Текст : непосредственный.

Abstract: The monograph presents the scientific and technical foundations of the process of additive shaping of products made of metal materials obtained by the method of layered electron beam surfacing of filler material supplied in the form of wire. The current trends in the development of technology and equipment are considered, the factors preventing the widespread introduction of technology in industry are highlighted. The methods of mathematical modeling used to study the processes of heat and mass transfer in the formed products are described. The description of experimental research methods is given and the results of the development and implementation of elements of the automatic process control system are analyzed.

TO ORDER

79. Ж2-21/72393

Аддитивные технологии. Материалы и технологические процессы = Additive technologies. Materials and technological processes : монография / А. И. Рудской, А. А. Попович, А. Ф. Ильющенко [и др.] ; Министерство науки и высшего образования Российской Федерации, Санкт-Петербургский политехнический университет Петра Великого. – Санкт-Петербург : Политех-пресс, 2021. – 515 с. : ил. – ISBN 978-5-7422-7224-3. – Текст : непосредственный.

Abstract: The monograph provides classification and general information about the main categories of additive technologies and their application. The features of additive technologies using new materials and the prospects for their development in the Russian Federation and Belarus are considered. Information about modern materials and equipment for forming products from them using additive manufacturing technologies is presented. It is intended for a wide range of specialists working in industry and scientific institutions, as well as those studying in the areas of master's training and postgraduate studies "Metallurgy", "Mechanical Engineering", "Design and technological support of machine-building industries", "Materials Science and technology of materials".

TO ORDER

80. Д10-19/68399

Горунов, А. И. Аддитивные технологии и материалы : учебное пособие / А. И. Горунов ; Министерство образования и науки Российской Федерации, Казанский национальный исследовательский технический университет им. А. Н. Туполева – КАИ. – Казань : Изд-во КНИТУ-КАИ, 2019. – 55 с. : ил. – ISBN 978-5-7579-2360-4. – Текст : непосредственный.

Abstract: The main directions and ways of development of additive technologies, phase transformations in materials in the process of additive manufacturing and their mechanical properties are shown, the issues of the development of physico-chemical and physico-mechanical processes of formation of new materials and the scientific basis for the selection of materials with specified properties in relation to additive manufacturing are considered.

TO ORDER

81. Д10-21/96394

Горунов, А. И. Создание материалов с повышенными физико-механическими свойствами методами аддитивного производства : монография / А. И. Горунов, А. Х. Гильмутдинов ; Министерство науки и высшего образования Российской Федерации, Казанский национальный исследовательский технический университет им. А. Н. Туполева – КАИ. – Казань : Изд-во КНИТУ-КАИ, 2021. – 206, [1] с. : ил. – ISBN 978-5-7579-2554-7. – Текст : непосредственный.

Abstract: The main directions and ways of development of the method of direct laser deposition of metals, phase transformations in materials in the process of additive manufacturing and their mechanical properties are shown; the issues facing research engineers in the design and manufacture of products by layer-by-layer deposition of material are considered. It is intended for students, postgraduates, teachers of higher educational institutions and researchers specializing in the field of materials science in mechanical engineering and additive technologies.

TO ORDER

82. Д10-20/83078

Егорова, Р. В. Технология изготовления деталей методом порошковой металлургии и перспективные материалы, применяемые в аддитивных технологиях : учебное пособие / Р. В. Егорова, М. С. Егоров ; Министерство науки и высшего образования Российской Федерации, Донской государственный технический университет. – Ростов-на-Дону : ДГТУ, 2020. – 139 с. : ил. – ISBN 978-5-7890-1721-0. – Текст : непосредственный.

Abstract: Various technologies for the production of high-density powder materials, the structure and mechanical properties of hot-formed powder steels are considered. The properties of powder steels have been studied depending on various heat treatment conditions. The textbook presents the technological requirements for the designs of powder parts, which is an important part of the technological process of manufacturing products by powder metallurgy. The analysis of the current state of the issue in the field of materials, technologies and equipment for the production of products using additive technologies is carried out. The existing methods of obtaining products using additive technologies, promising materials that are used in these technologies, as well as existing equipment in this area are described. It is intended for students and undergraduates of higher educational institutions studying in the areas of training "Materials Science and technology of metals", as well as for graduate students in the direction of "Materials Science" (Mechanical Engineering).

TO ORDER

83. Ар20-5334

Ильинский, А. В. Совершенствование метода динамического индентирования и средств контроля твердости материалов изделий, выполненных по аддитивным технологиям : 05.11.13 – Приборы и методы контроля природной среды, веществ, материалов и изделий : автореферат диссертации на соискание ученой степени кандидата технических наук / А. В. Ильинский. – Санкт-Петербург, 2020. – 20 с. – Текст : непосредственный.

TO ORDER

84. Ляпков, А. А. Полимерные аддитивные технологии : учебное пособие для вузов / А. А. Ляпков, А. А. Троян. – Санкт-Петербург : Лань, 2022. – 120 с. – ISBN 978-5-8114-8708-0. – URL: https://e.lanbook.com/book/200318 (дата обращения: 23.05.2022). – Access mode: for authorization. users. – Text : electronic.

Abstract: The manual discusses the possibilities and trends in the development of modern methods of 3D printing with polymers. The main varieties and features of polymer additive technologies are shown. The manual was prepared by specialists of the Research School of Chemical and Biomedical Technologies and the Engineering School of Natural Resources of the National Research Tomsk Polytechnic University. The manual is intended for masters of the direction "Materials Science and technology of materials", "Chemical Technology", students of advanced training courses, and will also be useful to bachelors, masters, graduate students and engineering and technical workers associated with the production and processing of polymer materials.

85. Ж2-21/72390

Материалы и аддитивные технологии. Современные материалы для аддитивных технологий = Materials and additive technologies. Modern materials for additive technologies : Training manual : учебное пособие / А. А. Попович, В. Ш. Суфияров, Н. Г. Разумов [и др.] ; Министерство науки и высшего образования Российской Федерации, Санкт-Петербургский политехнический университет Петра Великого. – Санкт-Петербург : Политех-пресс, 2021. – 203 с. : ил. – ISBN 978-5-7422-7090-4. – Текст : непосредственный.

Abstract: Up-to-date information about additive manufacturing materials is presented. The analysis of the current state of problems in the field of materials that ensure the production of products based on modern innovative technologies is carried out. The developments of the Polytechnic University in the field of additive manufacturing are presented.

TO ORDER

86. Д10-20/84485

Новые материалы XXI века: разработка, диагностика, использование = New materials of the XXI century: development, diagnostics, usage : материалы I Международной молодёжной конференции, 21-24 апреля 2020 года, г. Москва, Россия / Национальный исследовательский технологический университет «МИСиС» (НИТУ «МИСиС») [и др.] ; под редакцией В. М. Тютюнника [и др.]. – Тамбов [и др.] : Нобелистика, 2020. – 221 с. : ил. – ISBN 978-5-86609-235-2. – Текст : непосредственный.

Abstract: The publication presents the materials of the I International Youth Scientific Conference on the following topics: Application of materials and methods of additive technologies in the design and manufacture of elements of gas turbine engines; Thermal radiation diagnostics of the stressed state of rock massifs containing underground hydrocarbon storage; Determination of dynamic modules of uniformity of samples of soil cement products; Study of the acousto-emission effect of memory in various types of granite, etc.

TO ORDER

87. Особенности материалов и технологий аддитивного производства изделий / А. Н. Кубанова, А. Н. Сергеев, Н. М. Добровольский [и др.]. – Text : electronic // Чебышевский сборник. – 2019. – Т. 20. – № 3 (71). – С. 453-477. – ISSN 2226-8383. – URL: https://www.elibrary.ru/item.asp?id=42411388 (дата обращения 07.06.2022). – Access mode: Scientific Electronic Library eLIBRARY.RU .

Abstract: The paper presents comparative schemes of the classical production of products of complex shape and their production using additive technologies, indicating the main positive and negative aspects of the use of additive technologies. The main technologies of additive manufacturing of products are listed, indicating the specifics of their application. The methods of obtaining and properties of powder materials are described. The technology of spheroidization of powder materials and its post-processes are described. The concept of a full cycle of additive manufacturing is presented. The main software packages for modeling the processes of additive manufacturing of products from various metal systems are presented.

88. Ж2-21/71750

Перспективные технологии и материалы : материалы международной научно-практической конференции, г. Севастополь, 06-08 октября 2021 года / Министерство науки и высшего образования Российской Федерации, Севастопольский государственный университет. – Севастополь : Севастопольский гос. ун-т, 2021. – 315 с. : ил. – ISBN 978-5-6043402-5-7. – Текст : непосредственный.

Abstract: The collection of materials was compiled following the results of the International Scientific and Practical Conference "Promising Technologies and Materials", organized by the Sevastopol State University on October 06-08, 2021. The collection contains materials of scientific research by domestic and foreign authors devoted to current and promising technologies and materials in the field of nanotechnology, additive technologies, biotechnologies.

TO ORDER

89. Ар20-374

Терентьев, С. А. Разработка технологии и оборудования аддитивного производства металлических изделий плазменной наплавкой плавящимся электродом : 05.02.10 – Сварка, родственные процессы и технологии : автореферат диссертации на соискание ученой степени кандидата технических наук / С. А. Терентьев. – Пермь, 2019. – 16 с. : ил. – Текст : непосредственный.

TO ORDER

90. Д10-20/83619

Электронно-лучевая технология аддитивного формообразования с подачей присадочной проволоки : монография / А. В. Щербаков, Д. А. Гапонова, А. П. Слива [и др.] ; Министерство науки и высшего образования Российской Федерации, Национальный исследовательский университет «МЭИ». – [Изд. 2-е, испр. и перераб.]. – Москва : Изд-во МЭИ, 2020. – 195 с. : ил. – ISBN 978-5-7046-2336-6. – Текст : непосредственный.

Abstract: The monograph presents the scientific and technical foundations of the process of additive shaping of products made of metal materials obtained by the method of layered electron beam surfacing of filler material supplied in the form of wire. The current trends in the development of technology and equipment are considered, the factors preventing the widespread introduction of technology in industry are highlighted. The methods of mathematical modeling used to study the processes of heat and mass transfer in the formed products are described. The verification of the developed models has been carried out and the prospects of their application for the analysis of heat transfer and controlled mass transfer processes with continuous and pulse-periodic exposure of an electron beam to a liquid bath, taking into account the reflection and re-reflection of electrons, have been shown. The description of experimental research methods is given and the results of the development and implementation of elements of the automatic process control system are analyzed.

TO ORDER