Home >> For users >> Exhibitions >> Reliability of complex systems
Reliability of complex systems
The publications presented at the exhibition address current issues related to the reliability of machines and complex systems. Theoretical and practical issues of reliability of complex systems at various stages of their life cycle are presented. The methods of ensuring and improving reliability at the stages of design, serial production and operation are given. Information is presented on the physical processes of malfunction of objects, mathematical methods of reliability calculations, measures aimed at improving the reliability and survivability of systems. The contribution of domestic scientists to the development of a promising scientific direction – forecasting the reliability of machines and mechanisms is noted, examples of successful solutions to problems of increasing the resource of technical facilities in various industries and production are given.
The exhibition is held as part of the All-Russian Science Festival "Science 0+". During the preparation of the exhibition, publications from the fund of the State Scientific Library of Russia were used: monographs, collections of scientific papers, textbooks and manuals, conference materials, articles from specialized journals, as well as publications from electronic library systems "BOOK.RU ", "Doe", "ZNANIUM.COM " "ibooks.ru ", digital educational resource "IPR SMART", scientific electronic library "eLIBRARY.RU ".
The materials of the exhibition can be found in the reading room of catalogues and reference bibliographic literature of the main library building (room 201) from September 28 to October 28, 2022. At the end of the exhibition period, you can pre-order the print edition you are interested in from the list by clicking the "ORDER" button. To order, authorization is required in the reader's Personal Account. You can work with the ordered publications in the reading room chosen by you when placing the order.
If you have any questions about the use of printed publications presented at the exhibition, please call: 8 (495) 698-93-07, e-mail: This email address is being protected from spambots. You need JavaScript enabled to view it. or in a chat on the main page of the library's website.
Authorization is required to read electronic publications presented at the exhibition. Logins and passwords for authorization are placed in the Personal Account in the "Licensed resources" section.
Thematic sections of the exhibition:
1. General questions of reliability theory
2.1. IT technologies, electronics and radio engineering
2.2. Energy and power supply, heat engineering and automation
2.4. Military complex and space
2.5. Construction, urban economy and housing and communal services
2.6. Transport (air, railway, sea and motor transport)
1. General questions of reliability theory
1. Баженов, Ю. В. Основы теории надёжности машин : учебное пособие / Ю. В. Баженов, М. Ю. Баженов. – 2-е изд., перераб. и доп. – Москва : ФОРУМ : ИНФРА-М, 2021. – 315 с. – (Высшее образование : Бакалавриат). – DOI 10.12737/1040990. – ISBN 978-5-16-015559-3. – URL: https://znanium.com/catalog/product/1040990 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook discusses the basic concepts and definitions of reliability theory; the causes of machine malfunction and patterns of changes in their technical condition; factors determining the intensity of wear; methods for obtaining and analyzing information about failures and malfunctions; processing and analyzing information about reliability; ensuring the reliability of machines at the stages of design, production and operation. Meets the requirements of the federal state educational standards of higher education of the latest generation. It is intended for students of higher educational institutions studying in bachelor's and master's degree courses on 23.03.03 and 23.04.03 "Operation of transport and technological machines and complexes".
2. Безопасность и надёжность технических систем : учебное пособие / Л. Н. Александровская, И. З. Аронов, В. И. Круглов [и др.] – Москва : Логос, 2020. – 376 с. – URL: https://znanium.com/catalog/product/1211589 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The basic concepts in the field of safety and reliability of technical systems and their most important indicators are given. The methods of ensuring the safety and reliability of products at various stages of their life cycle are systematized: during development, production and operation. The main attention is paid to the methods of qualitative analysis and preventive methods of dealing with failures. A significant place is occupied by the systematic presentation of the modern theory of probabilistic and statistical analysis of the safety of complex technical products. The methodology of "acceptable risk" has been adopted as the basic concept. The application of probabilistic security analysis methods is illustrated by a large number of examples. It can be used in the educational process in a wide range of areas (specialties) of engineering and technology, especially in the training of personnel specializing in testing, design and operation of complex technical systems. It is of interest to scientists and specialists in the field of aviation, rocket science and space.
3. Беспалова, И. М. Надёжность технологических и технических систем : учебное пособие / И. М. Беспалова. – Санкт-Петербург : Санкт-Петербургский государственный университет промышленных технологий и дизайна, 2019. – 90 c. – DOI: https://doi.org/10.23682/102531 – ISBN 978-5-7937-1745-8. – URL: https://www.iprbookshop.ru/102531.html (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook discusses the basic concepts and provisions of reliability theory, describes quantitative reliability indicators, describes methods for assessing the reliability of complex technical systems with various types of element connections, discusses the issues of reliability assessment based on test results and the problems of providing technical systems with spare parts. The textbook contains tasks for self-completion and questions for the control of the acquired knowledge. It is intended for students studying in the direction of 15.04.02 – Technological machines and equipment.
4. Д10-21/88034
Билык, Н. А. Планирование испытаний на надёжность механических конструкций : монография / Билык Н. А. ; Российский федеральный ядерный центр – Всероссийский научно-исследовательский институт экспериментальной физики. – Саров : ФГУП РФЯЦ-ВНИИЭФ, 2021. – 113 с. – ISBN 978-5-9515-0462-3. – Текст : непосредственный.
Abstract: The methodology for determining single volumes and test modes of complex, expensive, dangerous systems under the action of mechanical loads is given. The publication is intended for researchers and engineers involved in reliability calculations and planning tests of mechanical structures, and can also serve as a textbook for students and postgraduates studying the course "Reliability of technical systems".
5. Н/21928/1
Вязкова, Л. П. Основы расчетов прочностной надёжности : учебное пособие : в 2 частях / Л. П. Вязкова, Л. В. Мальцев, С. В. Парышев ; Министерство науки и высшего образования Российской Федерации, Уральский федеральный университет имени первого Президента России Б. Н. Ельцина, Институт новых материалов и технологий. – Екатеринбург : Изд-во Уральского ун-та, 2019. – Текст : непосредственный.
Ч. 1. – 2019. – 175 с. – ISBN 978-5-7996-2786-7.
Abstract: The manual corresponds to the programs of the courses "Mechanics", "Machine parts and design basics", "Technical Mechanics", "Applied Mechanics" and is intended for students of all forms of education who perform course projects, term papers, computational and graphic work and homework in the sections "Theoretical Mechanics", "Resistance of materials" of these courses. The work consists of two parts. In the 1st part, the basic theoretical information is given, such types of deformation as stretching and compression, shear and torsion are considered. In the 2nd part, the planar transverse bending, the theory of strength, and complex resistance are considered.
6. Н/21928/2
Вязкова, Л. П. Основы расчетов прочностной надёжности : учебное пособие : в 2 частях / Л. П. Вязкова, Л. В. Мальцев, С. В. Парышев ; Министерство науки и высшего образования Российской Федерации, Уральский федеральный университет имени первого Президента России Б. Н. Ельцина, Институт новых материалов и технологий. – Екатеринбург : Изд-во Уральского ун-та, 2019. – Текст : непосредственный.
Ч. 2. – 2019. – 176 с. – ISBN 978-5-7996-2787-4.
Abstract: The manual corresponds to the programs of the courses "Mechanics", "Machine parts and design basics", "Technical Mechanics", "Applied Mechanics" and is intended for students of all forms of education who perform course projects, term papers, computational and graphic work and homework in the sections "Theoretical Mechanics", "Resistance of materials" of these courses. The work consists of two parts. In the 1st part, the basic theoretical information is given, such types of deformation as stretching and compression, shear and torsion are considered. In the 2nd part, the planar transverse bending, the theory of strength, and complex resistance are considered.
7. Д10-19/71655
Галеев, А. Д. Основы надёжности технических систем : учебное пособие / А. Д. Галеев, Е. В. Старовойтова, С. И. Поникаров ; Министерство науки и высшего образования Российской Федерации, Казанский национальный исследовательский технологический университет. – Казань : Изд-во КНИТУ, 2019. – 224 с. – Текст : непосредственный.
Abstract: The basic concepts and definitions of reliability theory, reliability indicators, mathematical and statistical foundations of reliability theory, mathematical models for predicting the reliability of objects, issues of reliability of technological equipment are considered. To consolidate the theoretical material, examples of problem solving are given, as well as tasks for independent execution.
8. Д10-19/78379
Грицкевич, О. В. Жизненный цикл технических систем : учебно-методическое пособие / О. В. Грицкевич, А. В. Шабурова ; Министерство науки и высшего образования Российской Федерации, Сибирский государственный университет геосистем и технологий (СГУГиТ). – Новосибирск : СГУГиТ, 2019. – 112 с. – ISBN 978-5-907052-83-3. – Текст : непосредственный.
Abstract: The training manual is intended for students in the field of training 27.03.05 "Innovation", training profile "Innovation Management".
9. Д10-20/80190
Долинов, Д. Л. Основы теории надёжности : конспект лекций / Д. Л. Долинов, А. Л. Долинов ; Министерство науки и высшего образования Российской Федерации, Пермский национальный исследовательский политехнический университет. – Пермь : Изд-во Пермского нац. исслед. политехнического ун-та, 2020. – 45 с. – ISBN 978-5-398-02396-1. – Текст : непосредственный.
Abstract: The fundamental terms and concepts of reliability theory are given, a number of reasons that affect the decrease in reliability of equipment are considered, organizational and technical measures to maintain reliability indicators at various stages of the life cycle are systematized.
10. Д10-20/87627
Захарычев, С. П. Основы теории надёжности : учебное пособие / С. П. Захарычев ; Министерство науки и высшего образования Российской Федерации, Тихоокеанский государственный университет. – Хабаровск : Изд-во ТОГУ, 2020. – 125 с. – ISBN 978-5-7389-3206-9. – Текст : непосредственный.
Abstract: The textbook was developed at the Department of "Transport and technological systems in construction and Mining". The main provisions and theoretical information are presented, methodological recommendations are given for solving problems of assessing the reliability of machines and equipment, their aggregates, assemblies and parts, which allow further planning the organization of maintenance of machines and equipment for their effective operation in real natural and climatic conditions of the Far East. The materials and methods of calculations for performing tasks and term papers, questions for self-preparation and a bibliographic list are presented.
11. Зорин, В. А. Надёжность механических систем : учебник / В. А. Зорин. – Москва : ИНФРА-М, 2021. – 380 с. – (Высшее образование). – ISBN 978-5-16-010252-8. – URL: https://znanium.com/catalog/product/1136796 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook discusses the main processes that cause a decrease in the reliability of mechanical systems: friction, wear, plastic deformation, fatigue and corrosion destruction of machine parts. Much attention is paid to the basics of tribotechnics, a scientific discipline that has an interdisciplinary nature and is based on the application of a systematic approach that makes it possible to take into account more fully all the factors on which the reliability of the elements of mechanical systems depends. The textbook provides the main directions and methods of ensuring the reliability of machines. Methods for assessing the reliability of machine parts and mechanical systems in general are described. Special attention is paid to the issues of safety assessment and quality assurance in the design and manufacture of mechanical systems. The textbook is intended for senior students of higher educational institutions and can be used in the preparation of students, undergraduates and postgraduates, as well as useful to specialists working in the field of production, repair and operation of transport and technological machines.
12. Зубарев, Ю. М. Математические основы управления качеством и надёжностью изделий : учебное пособие для вузов / Ю. М. Зубарев. – 2-е изд., стер. – Санкт-Петербург : Лань, 2021. – 176 с. – ISBN 978-5-8114-6674-0. – URL: https://e.lanbook.com/book/151654 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook deals with modern problems related to the reliability of machines and complex systems, including equipment of machine-building industries, automatic lines, GPS, etc. Mathematical methods for managing the quality and reliability of products are given. The basic concepts of the quality of products and their reliability during their operation, the basics of probability theory and mathematical statistics for technical applications are considered. The methods of statistical evaluation and verification of quantitative estimates, as well as verification of estimates for qualitative features, the use of variance and correlation analysis with a small amount of data are described. The textbook is intended for students of engineering specialties of universities, as well as for undergraduates, postgraduates. It can be useful for engineering and technical personnel of industrial enterprises, research institutes and design bureaus.
13. Колобов, А. Б. Прочностная надёжность и долговечность деталей машин и конструкций : учебное пособие / А. Б. Колобов. – Москва ; Вологда : Инфра-Инженерия, 2020. – 192 с. – ISBN 978-5-9729-0388-7. – URL: https://znanium.com/catalog/product/1168535 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: General deterministic models of strength and resource estimation from the course of classical resistance of materials are given, a detailed description of probabilistic methods for calculating strength reliability and durability under static and variable loading of parts and structures is given. Examples of solving problems using probabilistic and statistical calculation models are proposed. For students studying in mechanical-mathematical and machine-building areas of training, graduate students and engineering and technical workers.
14. Д10-18/62148
Лисов, А. А. Математические методы обеспечения безотказности сложных технических систем : учебник / А. А. Лисов, Т. А. Чернова, Ю. А. Костиков; под редакцией Т. А. Черновой. – Москва : ИНФРА-М, 2018. – 302 с. – ISBN 978-5-16-014516-7. – Текст : непосредственный.
Abstract: Methods of ensuring the reliability of complex technical systems at various stages of the life cycle are considered. The main attention is paid to system methods of reliability analysis, preventive methods of failure control, assessment and prediction of the degradation state of complex technical devices. A large section is devoted to methods for identifying the operational state of systems. The basis of identification is the method of least squares. The tasks of assessing the degradation state and parameters of the devices under consideration have been solved within the framework of the development of maintenance methods based on the actual condition, which is an important condition for the reliable functioning of technical systems and the reduction of technogenic risk. It is intended for master's degree students and can be recommended for senior students of technical universities, graduate students, as well as for advanced training of specialists dealing with reliability, reliability and safety of technical systems of a wide profile.
15. Любимова, Г. А. Надёжность технических систем и техногенный риск : лабораторный практикум для бакалавров / Г. А. Любимова, В. А. Моторин. – Волгоград : ФГБОУ ВО «Волгоградский ГАУ», 2020. – 108 с. – URL: https://znanium.com/catalog/product/1289050 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: In this laboratory workshop, laboratory work is accompanied by examples, with appendices, drawings and the necessary tables.
16. Малафеев, С. И. Надёжность технических систем. Примеры и задачи : учебное пособие для вузов / С. И. Малафеев, А. И. Копейкин. – 3-е изд., стер. -Санкт-Петербург : Лань, 2021. – 316 с. – ISBN 978-5-8114-8001-2. – URL: https://e.lanbook.com/book/171887 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The basic concepts of the theory of reliability of technical systems are considered. Information is provided on the physical processes of malfunction of objects, mathematical methods of reliability calculations, measures aimed at improving the reliability and survivability of systems. Examples of solving typical problems of reliability of elements and automation systems are given. Tasks for independent work are given. For university students studying in the direction of training "Management in technical systems", as well as in other technical areas of training.
17. Ж2-20/68948
Матевосова, К. Л. Техногенные системы и экологический риск : учебное пособие / К. Л. Матевосова ; Московский государственный институт международных отношений (университет) Министерства иностранных дел Российской Федерации, Кафедра международных комплексных проблем природопользования и экологии. – Москва : МГИМО-Университет, 2020. – 93, [2] с. – ISBN 978-5-9228-2232-9. – Текст : непосредственный.
Abstract: The varieties of technogenic systems and the risks arising from their activities are considered. Environmental problems are identified, the sources of which are technogenic systems, as well as ways to solve them on the basis of regulatory, organizational, technical, natural science, economic and managerial methods.
18. Д10-20/78688
Михайлов, В. С. Мир математики. Интегральные оценки в теории надёжности. Введение и основные результаты : монография / В. С. Михайлов, Н. К. Юрков. – Москва : ТЕХНОСФЕРА, 2020. – 149 с. – ISBN 978-5-94836-598-5. – Текст : непосредственный.
Abstract: The purpose of this work is to familiarize a wide range of readers with the main results of obtaining bias-efficient estimates, whose effectiveness has been proven (or selected as such based on integral estimation) on a fairly wide class of estimates. The monograph is intended primarily for engineers, postgraduates and undergraduates of technical specialties.
19. Ж2-18/65853
Моубрэй, Д. Техническое обслуживание, ориентированное на надёжность / Д. Моубрэй; перевод с английского К. А. Зырянова и В. С. Смирнова; под общей редакцией К. А. Зырянова. – Екатеринбург : Издатель К. А. Зырянов : Надёжная Книга, 2018. – 443 с. – Пер. изд. : Reliability-centered maintenance / J. Moubray. – 2th ed. – ISBN 978-5-6042031-0-1. – Текст : непосредственный.
Abstract: John Mowbray's classic book describes the philosophy of equipment maintenance based on a risk-based approach, and provides a step-by–step description of RCM analysis - the best currently available methods for developing an enterprise asset maintenance program.
20. Н/22033/1
Надёжность и качество International symposium "Reliability & Quality" : труды международного симпозиума, Россия, Пенза, 25 – 31 мая 2020 г. / Министерство науки и высшего образования РФ, Академия проблем качества РФ [и др.] ; редакционная коллегия: Юрков Н. К. – главный редактор [и др.]. – Пенза : Пензенский гос. ун-т, 2019. – ISSN 2220-6418.
Т. 1. – 2020. – 330 с. – Текст : непосредственный.
Abstract: The current problems of the theory and practice of improving reliability and quality; the effectiveness of the introduction of innovative and information technologies in fundamental scientific and applied research, educational and communication systems and environments, economics and law; the design of intelligent and diagnostic systems; environmental monitoring and control of the environment and biological objects, etc. are considered.
21. Н/22033/2
Надёжность и качество International symposium "Reliability & Quality" : труды международного симпозиума, Россия, Пенза, 25 – 31 мая 2020 г. / Министерство науки и высшего образования РФ, Академия проблем качества РФ [и др.] ; редакционная коллегия: Юрков Н. К. – главный редактор [и др.]. – Пенза : Пензенский гос. ун-т, 2019. – ISSN 2220-6418.
Т. 2. – 2020. – 336 с. – Текст : непосредственный.
Abstract: The current problems of the theory and practice of improving reliability and quality, the effectiveness of the introduction of information and innovative technologies in fundamental scientific and applied research, methods and tools for analyzing and predicting reliability and quality indicators of devices, devices and systems, as well as analysis of nonparametric models and evaluation of the residual life of dual-use products; resource conservation; design of intelligent expert and diagnostic systems; control and communication systems; interactive, telecommunication networks and service systems; environmental monitoring and control of the state of the environment and biological objects; research of physical and technological processes in science and technology to improve the quality of manufactured products.
22. Д10-20/78743
Нетес, В. А. Основы теории надёжности : учебное пособие / В. А. Нетес. – Москва : Горячая линия – Телеком, 2020. – 102 с. – ISBN 978-5-9912-0820-8. – Текст : непосредственный.
Abstract: The basics of reliability theory are briefly outlined, the basic concepts of reliability are defined and the standards in force in this area are indicated. Recommendations on the choice of reliability indicators for various technical objects are given; methods for calculating and evaluating system reliability indicators, including for complex systems with an irreducible structure and several levels of operability, are described; definitive and control reliability tests are considered, as well as reliability optimization, in particular, the problem of optimal redundancy.
23. Осадчий, Ю. М. Основы теории надёжности и диагностики : учебное пособие / Ю. М. Осадчий. – Москва : ИНФРА-М, 2021. – 197 с. – (Военное образование). – ISBN 978-5-16-015733-7. – URL: https://znanium.com/catalog/product/1048706 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook is compiled in accordance with the training program on the discipline "Fundamentals of reliability theory and diagnostics". It contains theoretical material, examples of statements and solutions to problems of assessing the reliability of technical means and their operability. Meets the requirements of the federal state educational standards of higher education of the latest generation. It is intended for students of technical specialties of higher maritime educational institutions.
24. Д10-18/63389
Посметьев, В. И. Основы теории надёжности : учебное пособие / В. И. Посметьев, А. М. Кадырметов, В. О. Никонов ; Министерство образования и науки Российской Федерации, Воронежский государственный лесотехнический университет имени Г. Ф. Морозова. – Воронеж : ВГЛТУ, 2018. – 151 с. – ISBN 978-5-7994-0856-5. – Текст : непосредственный.
Abstract: The lecture texts briefly outline the physical and mathematical foundations of machine reliability, as well as the methodology for calculating their reliability. For independent and in-depth study of the discipline, students are offered the appropriate literature. The texts of lectures can be useful when students are completing course projects and final qualifying works. The lecture texts are intended for bachelors in the areas of training 15.03.02 Technological machines and equipment and 23.03.03 Operation of transport and technological machines and complexes.
25. Д10-21/87939
Сызранцев, В. Н. Цилиндрические зубчатые передачи с арочными зубьями: геометрия, прочность, надёжность : монография / В. Н. Сызранцев, К. В. Сызранцева ; Министерство науки и высшего образования Российской Федерации, Тюменский индустриальный университет. – Тюмень : ТИУ, 2021. – 169 с. – ISBN 978-5-9961-2378-0. – Текст : непосредственный.
Abstract: The monograph reflects the results achieved within the framework of domestic scientific schools of the study of geometry, contact and bending strength, the probability of failure in contact and bending endurance of progressive gears, cylindrical gears with arched teeth, providing a multiple increase in durability in terms of contact and bending strength and endurance in conditions of non-rigid drive housings of machines. For the first time in domestic and foreign practice, taking into account the features of the geometry of the surfaces of arched teeth, which are a consequence of the tools and methods used for shaping arched teeth, engineering methods for calculating cylindrical gears with arched teeth for contact and bending strength, the probability of their trouble-free operation on the contact and bending endurance of teeth for both standard operating modes and operating conditions of gears have been developed, the loading mode of which is determined by the external torque distributions developed within the framework of parametric statistics, not described.
26. Д10-19/70665
Сязин, И. Е. Сопротивление материалов и надёжность технических систем на этапе проектирования / И. Е. Сязин, Г. И. Касьянов, А. В. Гукасян ; Министерство науки и высшего образования Российской Федерации, Кубанский государственный технологический университет. – Краснодар : КубГТУ, 2019. – 158 с. – Текст : непосредственный.
Abstract: The textbook is optimized for students of technical specialties of all directions and is recommended for use in practical classes on static resistance of materials as an example of solving typical problems. The theoretical elements of the theory of reliability and operability are given. The material of the textbook is presented with a minimum amount of theoretical material, the emphasis is on solving practical problems. The textbook will be useful for teachers and students of universities and technical schools, as well as engineers who perform calculations of non-complex structural elements and parts at the enterprise.
27. Д10-17/41088
Труханов, В. М. Надёжность в технике / В. М. Труханов. – 2-е изд., перераб. и доп. – М. : Спектр, 2017. – 656 с. : ил. – Парал. загл. англ. – Библиогр.: с. 654-656 (52 назв.). – 300 экз. – ISBN 978-5-4442-0121-3. – Текст : непосредственный.
Abstract: Theoretical and practical issues of reliability of complex systems at various stages of their life cycle are considered. The methods of ensuring and improving reliability at the stages of design, serial production and operation, mathematical models for constructing reliability growth curves by the passive method and taking into account control actions, as well as ways to improve reliability by constructive and technological methods are presented. The book is provided with a large number of examples based on specific practical material taken from the field of mechanical engineering for the creation of complex technical types of heavy-duty mobile installations. However, despite the special selection of examples, engineers working in other branches of technology can also use these materials. The book consists of ten chapters and an appendix. Each of the chapters is devoted to the study of a specific issue related to the methods of ensuring and improving the reliability of a complex technical system. The application consists of tables and nomograms designed for practical calculations of reliability and determination of test volumes.
28. Щурин, К. В. Надёжность машин : учебное пособие / К. В. Щурин. – Санкт-Петербург : Лань, 2019. – 592 с. – ISBN 978-5-8114-3748-1. – URL: https://e.lanbook.com/book/121468 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The book contains basic information about the concept of machine reliability, terminological and mathematical apparatus, physico-chemical foundations of the development of damaging processes that form failures, computational, experimental and expert methods for evaluating, rationing and improving the reliability of complex technical systems. The basic principles of evaluation and management of reliability indicators of ergatic systems, economic, philosophical and socio-legal aspects of reliability are described. The manual is intended for students and postgraduates studying in technical areas and specialties, researchers and practical specialists of industrial and transport enterprises, as well as for university teachers in the system of additional professional education and specialists in these areas of activity.
2.1. IT technologies, electronics and radio engineering
29. Д10-21/97214
Арунянц, Г. Г. Надёжность и качество АСОИУ : учебное пособие / Г. Г. Арунянц, Н. Б. Розен ; Калининградский государственный технический университет. – Калининград : КГТУ, 2021. – 123, [1] с. – ISBN 978-5-94826-605-3. – Текст: непосредственный.
Abstract: This textbook has been developed in accordance with the curriculum of bachelor's degree training in the direction of training 09.03.01 "Computer Science and computer engineering", is intended for a deeper study of the discipline "Reliability and quality of ASOIU" and involves bringing to the trainees in a simple and accessible form knowledge on the main problems of ensuring the security of the enterprise information system. The manual outlines the basic concepts and concepts of the discipline "Reliability and quality of ASOIU". Attention is paid to the issues of analysis and calculations of the reliability of the ASOIU hardware and software and the influence of a human operator on the reliability of systems. The basics of ASOIU ergonomics are presented. The main criteria and factors affecting the reliability and quality of ASOIU, ways to improve the reliability of computer hardware and software are considered. The manual can be used by master's degree students when studying in the field of Computer Science and Computer Engineering and graduate students in the specialty "System analysis, management and information processing".
30 Д10-20/82459
Барышникова, Н. Ю. Надёжность информационных систем : учебное пособие / Н. Ю. Барышникова, Н. Ю. Барышникова ; Федеральное агентство морского и речного транспорта, Государственный университет морского и речного флота имени адмирала С. О. Макарова, Институт Водного транспорта, Кафедра вычислительных систем и информатики. – Санкт-Петербург : Изд-во ГУМРФ им. С. О. Макарова, 2020. – 126, [1] с. – ISBN 978-5-9509-0405-9. – Текст: непосредственный.
Abstract: The manual discusses the main methods of assessing and calculating the reliability of hardware and software of information systems based on static, structural and information models, as well as methods for ensuring the formation of the correct programming style and testing of software equipment. The issues of ensuring and maintaining the reliability of the software package, which are currently particularly relevant, are considered in detail.
30. Бейер, Б. Site Reliability Engineering. Надёжность и безотказность как в Google. – Санкт-Петербург : Питер, 2019. – 592 с. – ISBN 978-5-4461-0976-0. – URL: https://ibooks.ru/bookshelf/358168/reading (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Текст: электронный.
Abstract: For almost 20 years, Google has been providing unimaginably complex and large-scale systems that respond sensitively to user requests. The Google search engine finds the answer to any questions in a fraction of a second, Google maps reflect the earth's landscape with the highest accuracy, and Google Mail is available in 365/24/7 mode and, in fact, became the first public cloud storage. Are these systems flawless? No, they also fail, break down and become obsolete, like any technique. We just don't notice it. The thing is that for more than ten years Google has been developing a unique Site Reliability Engineering technology that ensures the smooth operation and progressive development of software systems of any complexity. This book is a storehouse of experience accumulated by Google over the years, the collective work of many outstanding specialists and an indispensable resource for any engineer who wants to develop and maintain any products as efficiently and efficiently as possible.
31. Васюков, О. Г. Надёжность информационных систем : лабораторный практикум / О. Г. Васюков. – Самара : Самарский государственный технический университет, ЭБС АСВ, 2019. – 71 c. – URL: https://www.iprbookshop.ru/111385.html (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: It is intended for use in the course of laboratory work on the discipline "Reliability of information systems" by students studying in the field of training 09.03.02 "Information systems and technologies". The practical issues of calculating and plotting the unreliability and failure rate functions in recoverable and non-recoverable systems, plotting the distribution law of random variables, predicting the probability of failures based on test results are considered. Examples of solving problems are given: calculating the reliability of systems with various types of product redundancy; determining the confidence limits of the binomial distribution parameters using the Klopper–Pearson principle. Questions are given for testing students on these topics for intermediate and final control of knowledge.
32. Д10-18/54822
Гельфман, Т. Э. Основы теории надёжности РЭС : учебное пособие / Т. Э. Гельфман, Н. М. Легкий ; Московский технологический университет. – Москва : Моск. технол. ун-т (МИРЭА), 2018. – 91 с. – ISBN 978-5-7339-1467-1. – Текст : непосредственный.
Abstract: The main reliability indicators of non-repaired and repaired radio-electronic systems (RES) with a Poisson failure flow are considered, mathematical models of sudden failures are described. Various methods and methods of redundancy, as well as optimal redundancy tasks are analyzed. Methods of constructing optimally redundant systems are given. Typical examples of problem solving are given.
33. Д10-20/81373
Гельфман, Т. Э. Прогнозирование надёжности РЭС : учебное пособие / Т. Э. Гельфман, Н. М. Легкий – Москва : Изд-во Эдитус, 2020. – 138 с. – ISBN 978-5-00149-452-2. – Текст : непосредственный.
Abstract: The most common forecasting methods, principles of choosing predictive parameters and forecasting models, as well as examples of their application in forecasting reliability are described. The types of reliability tests and diagnostic control of the reliability and readiness of radio-electronic products during routine prophylaxis are considered. Typical examples of calculation are given.
34. Гончаренко, А. Н. Надёжность АСОИУ : методические указания / А. Н. Гончаренко. – Москва : Издательский Дом МИСиС, 2018. – 4 c. – URL: https://www.iprbookshop.ru/98210.html (дата обращения: 21.07.2022). – Access mode: for authorized users. – Text : electronic.
Abstract: The guidelines are intended for practical training in the discipline "Reliability of ASOIU". The material necessary for solving problems, presented within the framework of this discipline, is briefly presented. The basic formulas and tasks for a conscious understanding of the theory of reliability of various systems are given. The guidelines are intended for undergraduate students in the field of training 09.03.01 "Computer Science and Computer Engineering", as well as students of information technology.
35. Д10-20/83273
Горшков, В. В. Вопросы математического моделирования отказоустойчивых информационных систем : монография / В. В. Горшков ; Министерство науки и высшего образования РФ, Российский государственный университет имени. А. Н. Косыгина (Технологии. Дизайн. Искусство) (РГУ им. А. Н. Косыгина). – Москва : РГУ имени А. Н. Косыгина, 2020. – 92 с. – ISBN 978-5-87055-927-8. – Текст : непосредственный.
Abstract: The monograph "Issues of mathematical modeling of fault-tolerant information systems" considers a mathematical apparatus that can be used as the basis for strategies to improve the reliability of the hardware of corporate information systems, including updating and replacing hardware and software (computers) that make up the main office equipment. Mathematical models of increasing the reliability of corporate information systems through the use of redundancy are also presented, which is directly related to corporate information systems to ensure fault tolerance.
36. Д10-18/61352
Захаров, Ю. В. Качество и надёжность электронных средств : учебное пособие / Ю. В. Захаров ; Министерство науки и высшего образования Российской Федерации, Поволжский государственный технологический университет. – Йошкар-Ола : ПГТУ, 2018. – 162 с. – ISBN 978-5-8158-1981-8. – Текст : непосредственный.
Abstract: The basic information from probability theory and mathematical statistics, issues of control, evaluation and quality management of electronic means are considered. The basic concepts, quantitative indicators and methods of calculating the reliability of electronic means for sudden failures are given. The manual is intended for university students studying in the direction of "Design and technology of electronic equipment" and specialties "Design and technology of electronic means", "Design and technology of electronic computing means", studying courses: "Quality management of electronic means", "Fundamentals of design and reliability of electronic means", "Reliability of electronic means".
37. Д10-19/82869
Иванов, А. Н. Надёжность вычислительных систем : учебное пособие для курсантов 4-го курса, обучающихся по направлению 01.03.04 "Прикладная математика" / А. Н. Иванов, Е. М. Богданова ; МЧС России, Санкт-Петербургский университет Государственной противопожарной службы. – Санкт-Петербург : Санкт-Петербургский ун-т ГПС МЧС России, 2019. – 115 с. – ISBN 978-5-907386-25-9. – Текст : непосредственный.
Abstract: The development of computing systems has given rise to many problems related to the reliability of their functioning. The complexity of their solution lies in the fact that it is necessary to consider three areas together: the reliability of the hardware, the reliability of the software, the reliability of the man-machine unit. The textbook was developed in accordance with the work program of the discipline "Reliability of computing systems" and is intended for 4th-year cadets studying in the direction 01.03.04 "Applied Mathematics".
38. Д10-18/65295
Кон, Е. Л. Надёжность и диагностика компонентов инфокоммуникационных и информационно-управляющих систем : сборник задач и упражнений: учебное пособие / Е. Л. Кон, М. М. Кулагина ; Министерство науки и высшего образования Российской Федерации, Пермский национальный исследовательский политехнический университет. – Пермь : Изд-во Перм. нац. исслед. политехн. ун-та, 2018. – 173 с. – ISBN 978-5-398-01954-4. – Текст : непосредственный.
Abstract: The issues of reliability and diagnostics of components of infocommunication and information management systems are described. It is intended for students of the training areas 210700 "Infocommunication technologies and communication systems", 220400 "Management in technical systems", 090900 "Information security" and specialty 090303 "Information security of automated systems". It may be useful for students of other specialties.
39. Кэмпбелл, Л. Базы данных. Инжиниринг надёжности. – Санкт-Петербург : Питер, 2020. – 304 с. – ISBN 978-5-4461-1310-1. – URL: https://ibooks.ru/bookshelf/367974/reading (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text: electronic.
Abstract: A real revolution has taken place in the IT sphere – they began to work with infrastructure as with code. This process creates not only new problems, but also opportunities to ensure the uptime of databases. The authors have prepared this practical guide for anyone who wants to join the community of modern database reliability engineers (WIKI). In this book: requirements for data storage services and risk management; creation and development of an architecture that provides transparent database support; optimization of the release management process; data storage, indexing and replication; determination of data warehouse characteristics and selection of optimal options for its use; study of architecture components and creation of architectures focused on big data processing.
40. Мартишин, С. А. Основы теории надёжности информационных систем : учебное пособие / С. А. Мартишин, В. Л. Симонов, М. В. Храпченко. – Москва : ФОРУМ : ИНФРА-М, 2020. – 255 с. – (Высшее образование: Бакалавриат). – ISBN 978-5-8199-0757-3. – URL: https://znanium.com/catalog/product/1062374 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The manual is intended for obtaining theoretical and practical skills in the study of disciplines: "Design of information systems", "Reliability, ergonomics and quality of ASOIU", "Human-machine interaction", "Design of ASOIU software", "Databases". It can also be used in the study of disciplines: "Data management", "Information processing technologies", "Information systems tools", "Methods and means of designing information systems and technologies". For students of higher educational institutions studying in the areas of 09.03.02 "Information systems and technologies", 09.03.01 "Computer Science and computer engineering", 27.03.04 "Management in technical systems", as well as 09.03.04 "Software engineering", for graduate students, specialists in the fields of information systems design, automated information processing and management and human-machine interaction, as well as for persons engaged in self-education.
41. Д10-18/60995
Методы и средства повышения надёжности модулей памяти компьютеров : монография / С. В. Волобуев [и др.] ; Министерство сельского хозяйства Российской Федерации, Волгоградский государственный аграрный университет, Электроэнергетический факультет. – Волгоград : Волгогр. ГАУ, 2018. – 280 с. – ISBN 978-5-4479-0138-7. – Текст : непосредственный.
Abstract: The structure of memory modules with built-in means of self-testing and restoring operability in case of multiple failures is proposed, which will allow replacing the data bits of the main array of storage cells in which failures occurred with data coming from the outputs of the spare array of storage cells. Automatic reconfiguration of the structure of memory modules when failures are detected is provided by the proposed hardware and software. The features of test algorithms designed to perform diagnostics of microcircuits and memory modules are given. The monograph is intended for university students and postgraduates and specialists in diagnosing computer memory modules. The monograph was made with the financial support of the RFBR grant (project 16-08-00393).
42. Минакова, О. В. Надёжность информационных систем : учебник / О. В. Минакова. – Саратов : Вузовское образование, 2020. – 283 c. – ISBN 978-5-4487-0673-8. – URL: https://www.iprbookshop.ru/91117.html (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: This textbook is an introduction to the modern application of the classical theory of reliability in information systems and technologies. The main feature of the publication is a practice-oriented approach to the compilation of material that allows combining theory and solving practical problems in assessing and analyzing the reliability of information systems. The textbook contains theoretical material, tasks to consolidate the studied topics, options for tasks for independent work, control tests. Prepared taking into account the requirements of the Federal State Educational Standard of Higher Education. It is intended for students studying in an enlarged group of training areas 09.00.00 "Computer Science and computer engineering", studying the discipline "Reliability of information systems". The publication can also be useful for specialists working on reliability and risk assessment tasks.
43. Д10-19/75937
Надёжность и безопасность автоматизированных систем управления : учебное пособие / Э. С. Соколова, Д. В. Дмитриев, С. Н. Капранов [и др.] ; Министерство науки и высшего образования Российской Федерации, Нижегородский государственный технический университет им. Р. Е. Алексеева. – Нижний Новгород : Нижегородский гос. технический ун-т им. Р. Е. Алексеева, 2019. – 124 с. – ISBN 978-5-502-01256-0. – Текст : непосредственный.
Abstract: The main provisions of the theory of reliability, control, diagnostics of technical objects and software and hardware control systems are considered, estimates of technogenic risk are given. Models of analysis and synthesis of reliable systems are presented, procedures for their control and diagnostics are considered, as well as examples of the use of reliability theory to assess the safety of technical systems. The approaches to assessing the reliability of the software, which is an integral part of the automated control system, are analyzed. The methodology of analysis and assessment of technogenic risk is considered, the main qualitative and quantitative methods of risk assessment, the methodology of safety and risk assessment using logical and graphical methods of analysis, acceptable risk criteria, risk management principles, as well as examples of the use of the concept of risk in engineering practice are given.
44. Д10-18/57377
Надёжность и эксплуатация радиотехнических систем : монография / С. Ф. Боев [и др.]; под ред. С. Ф. Боева. – Воронеж : Науч. кн., 2018. – 369 с. – Текст : непосредственный.
Abstract: The monograph systematizes the fundamental concepts of the theory of reliability and the theory of operation of complex radio engineering systems, provides examples of calculating reliability indicators, reveals the main ways to improve reliability at the stages of design, manufacture and operation, considers the human factor as an element of a complex technical system, comprehensively analyzes the system of technical operation of REA and the features of building such systems in modern conditions. The book is intended for specialists in the field of operation of radio engineering systems, as well as students and students of higher educational institutions in the study of the theoretical foundations of technical operation.
45. Надёжность радиоэлектронных средств : учебное пособие для вузов / Д. Ю. Муромцев, И. В. Тюрин, О. А. Белоусов, Р. Ю. Курносов. – 2-е изд., стер. – Санкт-Петербург : Лань, 2021. – 88 с. – ISBN 978-5-8114-8121-7. – URL: https://e.lanbook.com/book/171866 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook discusses the concept of risk as a measure of danger and the concept of reliability of technical systems and industrial safety as an integral part of technogenic safety. The basic terms and definitions of reliability of technical systems are given, the main hazards of technical systems are indicated, the relevance of the security problem from the point of view of its socio-economic significance is substantiated. The main provisions of the theory of reliability of technical systems and technogenic risk, as well as modern methods of risk management are presented. Examples of calculating tasks are given. The textbook is intended for students studying in the field of training 20.03.01 "Technosphere safety" and specialty 20.05.01 "Fire safety", studying the discipline "Reliability of technical systems and technogenic risk".
46. Д10-18/63237
Севастьянов, Б. Г. Реализация САР повышенной надёжности : монография / Б. Г. Севастьянов ; Министерство образования и науки РФ, Волгоградский государственный технический университет. – Волгоград : ВолгГТУ, 2018. – 197 с. – ISBN 978-5-9948-2806-9. – Текст : непосредственный.
Abstract: The features of the implementation of analog control algorithms of increased reliability on industrial controllers are revealed. All algorithms are presented in the RVB language. Some of the programs are presented in the CFC language. ATS of various complexity are considered: from a standard PID controller to a combined controller with a variable structure. The algorithm of the shockless transition of the PID controller from automatic to manual operation and back, both through the deviation channel and the disturbance channel, is considered. The importance of assessing the insensitivity zone of the regulator through these channels is shown. Special attention is paid to the need to take into account the human factor. The general structure and an example of a high-reliability ATS program are given. The programs are accompanied by tables for issuing and receiving information over a local network, as well as tables explaining what information is issued to the front panel of the controller by a specific program. The principles of programming that improve the quality of programs in the FBD language and reduce the cost of operating the ATS are revealed. It is pointed out that there is a need to improve the software of domestic controllers, first of all, algorithm libraries.
47. Солодов, В. С. Надёжность радиоэлектронного оборудования и средств автоматики : учебное пособие / В. С. Солодов, Н. В. Калитёнков. – 2-е изд., испр. и доп. – Санкт-Петербург : Лань, 2021. – 220 с. – ISBN 978-5-8114-3100-7. – URL: https://e.lanbook.com/book/169270 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: technical diagnostics of transport radio equipment and automation equipment. The course consists of 15 lectures, the lectures contain examples of solving typical problems. The textbook is intended for students studying in the areas of "Design and technology of electronic means", "Radio Engineering" (bachelor's level), "Radio electronic systems and complexes", "Technical operation of transport radio equipment", "Operation of ship electrical equipment and automation equipment" (specialty level).
48. Д10-20/87708
Струков, А. В. Логико-вероятностное моделирование надёжности и безопасности в задачах разработки и эксплуатации защищенных автоматизированных систем : учебное пособие / А. В. Струков ; Федеральное агентство железнодорожного транспорта, Петербургский государственный университет путей сообщения императора Александра I (ФГБОУ ВО ПГУПС). – Санкт-Петербург : ПГУПС, 2020. – 73 с. – ISBN 978-5-7641-1431-6. – Текст : непосредственный.
Abstract: The publication contains a theory, an overview of the regulatory framework and tasks for laboratory work on the development and operation of protected automated systems. The methods of the risk-based approach to the analysis of the processes of development and operation of systems are considered in detail. It is intended for studying theoretical material and performing laboratory work in the disciplines "Reliability of automated systems and information security tools" and "Development and operation of protected automated systems" and is designed for teachers, graduate students and students.
49. Тарасов, А. А. Функциональная реконфигурация отказоустойчивых систем : монография / А. А. Тарасов. – Москва : Логос, 2020. – 152 с. – ISBN 978-5-98704-654-8. – URL: https://znanium.com/catalog/product/1214527 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The issues of ensuring fault tolerance of MFM systems through functional reconfiguration are highlighted. The theoretical foundations of the choice of functional reconfiguration strategies for such systems are considered, a formalized conceptual basis in the field of fault tolerance is proposed, necessary and sufficient conditions for the existence of workable states, permissible redistribution of functions in these states, and conditions for the existence of fault-tolerant states are determined. The procedures of purposeful search for options for the redistribution of functions after the occurrence of functional failures are described. A set of methods for functional reconfiguration of systems and their technical implementation is described. Separate issues of assessing the fault tolerance of MFM systems are considered. For researchers and specialists in the field of information technology, information security and reliability of information systems. It can be useful for students and postgraduates of universities of relevant specialties.
50. Уорр, Кэти. Надёжность нейронных сетей: укрепляем устойчивость ИИ к обману. – (Серия «Бестселлеры O'Reilly»). – Санкт-Петербург : Питер, 2021. – 272 с. – ISBN 978-5-4461-1676-8. – URL: https://ibooks.ru/bookshelf/377030/reading (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: Deep neural networks (DNN) are becoming an integral part of IT products, provoking the emergence of a new direction of cyber attacks. Hackers are trying to deceive neural networks using data that would not be able to deceive a person. Katie Ward examines the motivation for such attacks, the risks that malicious input entails, as well as methods to increase the AI's resistance to such hacks. If you are a data science specialist, a security system architect and seek to increase the stability of AI systems, or you are simply interested in the difference between artificial and biological perception, then this book is for you.
2.2. Energy and power supply, heat engineering and automation
51. Д10-20/79989
Автоматизация и энергосбережение машиностроительного и металлургического производства: технология и надёжность машин, приборов и оборудования : материалы XIV Международной научно-технической конференции, 10 декабря 2019 г. / Министерство науки и высшего образования Российской Федерации, Вологодский государственный университет [и др.] ; ответственный редактор В. А. Раков. – Вологда : ВоГУ, 2020. – 470 с. – ISBN 978-5-87851-893-2 – Текст: непосредственный.
Abstract: Materials on various aspects and types of automation of mechanical engineering and metallurgy, including complex automation of design and manufacture of products, automation of assembly processes are presented. Considerable attention is paid by the authors to the features of the design of technological processes in the conditions of automated production, mathematical modeling in technological systems, automation of the design of technological processes and management of technical objects and processes.
52. Аполлонский, С. М. Надёжность и эффективность электрических аппаратов : учебное пособие / С. М. Аполлонский, Ю. В. Куклев. – Санкт-Петербург : Лань, 2021. – 448 с. – ISBN 978-5-8114-1130-6. – URL: https://e.lanbook.com/book/167900 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The issues of reliability of electrical devices used in modern electric power systems are considered. Mathematical methods in the theory of reliability of electrical devices are described, including quantitative reliability indicators, elements of general set theory and elements of mathematical logic, statistical evaluation methods, methods describing failure flows and recoveries. Practical methods of calculating the reliability of electrical devices are analyzed. The textbook is developed on the basis of state educational standards of higher professional education and is intended for students of higher technical educational institutions of full–time, part-time and part-time forms of education studying the reliability and efficiency of electrical devices. It can be useful for undergraduates, graduate students, teachers, as well as for a wide range of scientific and engineering workers who have encountered the noted problems in electric power systems.
53. Д10-18/80895
Афанасьев, В. Я. Формирование стратегии инновационного развития инжиниринговых компаний в энергетике : монография / В. Я. Афанасьев, Ю. Д. Александров, Ю. Л. Александров ; Министерство образования и науки Российской Федерации, Государственный университет управления. – Москва : Гос. ун-т упр., 2018. – 157 с. – ISBN 978-5-215-03106-3. – Текст: непосредственный.
Abstract: The monograph examines the issues of improving the management of engineering companies, describes the engineering business and defines its role in the implementation of the Energy Strategy of Russia. It is shown that the reliability and efficiency of the equipment of energy companies largely depend on the effective activity of engineering companies involved in the design, construction, commissioning, repair of power equipment, as well as in the development, implementation and technical support of new equipment and technologies. The theoretical and methodological aspects of innovation activities aimed at improving the efficiency of the functioning of engineering companies, the problems of commercialization of the results of intellectual activity in the electric power industry are considered.
54. Д10-18/59856
Балакирев, В. С. Надёжность и диагностика автоматизированных систем : учебное пособие / В. С. Балакирев, А. А. Большаков ; Министерство образования и науки Российской Федерации, Санкт-Петербургский политехнический университет Петра Великого. – Санкт-Петербург : Изд-во Политехн. ун-та, 2018. – 143 с. – ISBN 978-5-7422-6261-9. – Текст: непосредственный.
Abstract: The basic concepts of the theory of reliability and diagnostics in relation to software and hardware automation (PTSA) are introduced, methods and algorithms for experimental and analytical determination of reliability indicators of elements and systems, as well as non-destructive control of the condition of technical objects are considered, ways to ensure the desired reliability of software and hardware automation systems are shown. Methods and algorithms of the state of technical objects with the use of artificial intelligence methods are considered, in particular, using formalized expert knowledge in the form of a database of diagnostic models, decision-making blocks in the formation of diagnostic conclusions. Theoretical and applied aspects of reliability are considered: reliability and maintainability of electrical and software-technical means and automation systems.
55. Д10-20/84987
Белозерская, Т. Ю. Электроснабжение и надёжность электрооборудования промышленных предприятий : [учебное пособие] / Т. Ю. Белозерская, А. В. Хомяков ; Министерство науки и высшего образования Российской Федерации, Кубанский государственный технологический университет. – Краснодар : КубГТУ, 2020. – 187 с. – ISBN 978-5-8333-0976-6. – Текст : непосредственный.
Abstract: Methods of calculation and design of power supply schemes of industrial enterprises and institutions are considered. Examples of calculations are given and recommendations are given on the choice of the electric drive of technological installations, the cross section of wires and cables, circuit breakers, fuses, power transformers. The technical characteristics of the main electrical equipment with a voltage up to and above 1000 V. are given. Technical losses of electrical energy in the elements of the power supply system and ways to eliminate them are considered. The issues of reliability of electrical equipment and economics of electricity consumption are also considered. The manual is intended for students of electrical engineering, engineers, technicians and craftsmen engaged in the operation of power supply systems in industry.
56. Д10-18/60188
Дианов, В. Н. Надёжность, диагностика, сбоеустойчивость автоматизированных систем : монография / В. Н. Дианов ; Министерство образования и науки Российской Федерации, Московский политехнический университет. – Чебоксары : Новое время, 2018. – 811 с. – ISBN 978-5-906983-91-6. – Текст : непосредственный.
Abstract: The monograph is devoted to the issues of reliability, diagnostics, fault tolerance of modern automated systems used in various technological processes and industries – mechanical engineering, transport, aviation, robotics, astronautics and other areas of science and technology. Various original methods and means of providing diagnostics and reliability aimed at creating fault-resistant technological equipment are considered. 3 considerable attention is paid to the protection of information and cybersecurity of both modern and promising computer systems. The theoretical results are confirmed by numerous utility models: robotic complexes, various automated systems (asynchronous electric drive, gas turbine engines, navigation systems, radio altimeters, lighting and outdoor surveillance systems, signature analyzers, vehicles, etc.). The publication can be used in the courses "Diagnostics and reliability of automated systems", "Methods and means of computer information protection", "Technical diagnostics and adjustment of control systems", "Technical diagnostics and testing of vehicles", "Technical diagnostics, adjustment and testing of control systems of aircraft", as well as at the stage of preparation of master's dissertations and final qualifying works. The publication can be useful for scientific and engineering workers.
57. Д10-18/59682
Драгунов, Ю. Г. Обеспечение прочности и ресурса реакторных установок с водо-водяными энергетическими реакторами / Ю. Г. Драгунов. – Москва : Изд-во МГТУ им. Н. Э. Баумана, 2018. – 252 с. – ISBN 978-5-7038-4831-9. – Текст : непосредственный.
Abstract: Approaches to substantiating the safety of reactor installations with water-water power reactors, in particular the strength of equipment, taking into account loads and changes in the properties of materials in normal operation and in case of accidents, are described. The issues of resource management of critical equipment elements of reactor installations with water-water power reactors are considered. The manual is primarily addressed to students of the specialty "Nuclear reactors and materials", it can be useful for students and postgraduates studying in the field of training "Nuclear power Engineering and Technology", as well as specialists working in the field of creating equipment for the nuclear industry.
58. Д10-19/67423
Захаров, Л. А. Надёжность механизмов и оборудования СЭУ : учебное пособие / Л. А. Захаров, Ю. П. Чернигин ; Министерство науки и высшего образования Российской Федерации, Нижегородский государственный технический университет им. Р. Е. Алексеева. – Нижний Новгород : Нижегородский гос. технический ун-т им. Р. Е. Алексеева, 2019. – 105 с. – ISBN 978-5-502-01152-5. – Текст : непосредственный.
Abstract: The main issues of reliability of marine power plants, functional analysis of the SEU at the design stage, as well as the impact of operating and maintenance conditions on the reliability of SEU mechanisms and equipment are considered. It is intended for the study of the discipline "Reliability of SEU mechanisms and equipment" by students of the training direction 26.03.02 "Shipbuilding, ocean engineering, system engineering of marine infrastructure facilities".
59. Д10-18/57487
Зацепин, Е. П. Максимизация уровня эффективности отказоустойчивого функционирования систем электроснабжения : монография / Е. П. Зацепин. – Липецк : Липец. гос. техн. ун-т, 2018. – 119 с. – ISBN 978-5-6041045-6-9. – Текст : непосредственный.
Abstract: The monograph offers a scientific and technical approach to assessing the fault-tolerant functioning of power supply systems of industrial enterprises. The theory of random impulse flows is used as a mathematical research tool. It was she who made it possible, both theoretically and practically, to solve problems related to complex multi-level systems of industrial enterprises. Special attention is paid to the processes of redundancy and maintenance. It is technically and economically justified that this approach practically makes it possible to ensure the trouble-free operation of the receivers of technological machines under any negative factors affecting the fault-tolerant state of the power supply system. The monograph is intended for engineers, researchers, students of higher educational institutions, postgraduates, doctoral students. It can be useful for anyone who is interested in solving practical problems of power supply systems.
60. Д10-18/57588
Зацепин, Е. П. Основы оценки безотказности систем электроснабжения промышленных предприятий : монография / Е. П. Зацепин, А. Н. Шпиганович, В. И. Зацепина ; Липецкий государственный технический университет. – Липецк : Липец. гос. техн. ун-т, 2018. – 175 с. – ISBN 978-5-6041045-0-7. – Текст : непосредственный.
Abstract: The monograph presents the scientific and technical basis for assessing the reliability of electrical systems of industrial enterprises. Methods of analysis can be applied in various fields of science. The monograph suggests measures to eliminate the influence of random negative factors on the system and suggests ways to manage the reliability of systems. The main mathematical apparatus of the analysis is a random pulse flow. The monograph is intended for managers of both public and private organizations, researchers, teachers and students of educational institutions. It can be useful to anyone whose activities are related to hierarchical systems, regardless of their type and type.
61. Д10-18/59178
Зацепин, Е. П. Формирование и управление отказоустойчивого функционирования систем электроснабжения : монография / Е. П. Зацепин. – Липецк : Липец. гос. техн. ун-т, 2018. – 76 с. – ISBN 978-5-6041045-2-1. – Электронная копия доступна на сайте Научной электронной библиотеки eLIBRARY. – URL: https://www.elibrary.ru/item.asp?id=35599997 (дата обращения: 21.07.2022). – Access mode: for authorization. users.
Abstract: The monograph presents the results of many years of research in the field of reliability management of power supply systems of industrial enterprises. The research is based on the use of the theory of random impulse flows, which made it possible both theoretically and practically to solve problems related to complex multi-level systems of industrial enterprises. Special attention is paid to the processes of structural and temporary redundancy, as well as maintenance and preventive maintenance. It is theoretically proved that this approach practically ensures trouble-free operation of receivers of technological machines under any negative factors affecting the fault-tolerant state of the power supply system. The monograph is intended for a wide range of engineers, researchers, university students, postgraduates, doctoral students, anyone interested in using probabilistic methods to solve practical problems.
62. Д10-18/58014
Крылов, Е. Г. Оценка показателей надёжности автоматизированных систем : учебное пособие / Е. Г. Крылов ; Волгоградский государственный технический университет. – Волгоград : ВолгГТУ, 2018. – 78 с. – ISBN 978-5-9948-2878-6. – Текст : непосредственный.
Abstract: The main provisions of the theory of reliability of non-recoverable and recoverable objects and systems are presented; the mathematical apparatus for assessing the main indicators of reliability of objects based on the results of statistical data processing using theoretical laws of distribution of random variables is presented; methods for calculating the reliability of complex systems with various combinations of series-parallel connection of elements are presented. It is intended for university students studying in the areas of 15.03.04 "Automation of technological processes and production" and 27.03.04 "Management in technical systems".
63. Д10-19/66371
Кувшинов, В. В. Основы надёжности и технического обслуживания энергокомплексов на основе возобновляемых источников энергии : учебное пособие / В. В. Кувшинов, И. Ю. Софийский, Н. В. Морозова ; Министерство науки и высшего образования Российской Федерации, Севастопольский государственный университет, Институт ядерной энергии и промышленности. – Москва : Спутник, 2019. – 399 с. – ISBN 978-5-9973-5173-1. – Текст : непосредственный.
Abstract: The textbook discusses the issues of reliability and maintenance of power complexes with non-traditional energy sources. The main attention is paid to the mathematical apparatus used to solve applied problems to ensure the smooth operation of installations with unconventional energy sources. The issues of technical use of various devices for the conversion of unconventional energy sources are highlighted. The methodical manual is intended for students of technical specialties of universities and institutes, as well as for specialists in various fields of energy.
64. Д10-18/54339
Логачёва, О. В. Управление эксплуатационной надёжностью электрооборудования и технических систем : учебное пособие / О. В. Логачёва, С. М. Бакиров, Ю. В. Иванкина ; Саратовский государственный аграрный университет имени Н. И. Вавилова. – Саратов : Амирит, 2018. – 119 с. – ISBN 978-5-907035-08-9. – Текст : непосредственный.
Abstract: Management of operational reliability of electrical equipment and technical systems: a methodological guide for students of the training direction 35.03.06 "Agroengineering" and 35.04.06. The reliability of any electrical equipment and automation significantly depends on the operating conditions. Operating conditions in industrial premises are characterized by climatic and electromechanical influences, operating modes and the level of rational maintenance. The tutorial provides a methodology for determining the reliability of the entire system, taking into account operating conditions and without them.
65. Малафеев, С. И. Надёжность электроснабжения : учебное пособие для вузов / С. И. Малафеев. – 3-е изд., стер. – Санкт-Петербург : Лань, 2022. – 368 с. – ISBN 978-5-8114-9036-3. – URL: https://e.lanbook.com/book/183737 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The basic concepts of the theory of reliability of power supply of technical systems are considered. Information is provided on the physical processes of disruption of the operability of power supply systems, mathematical methods of reliability calculations, measures aimed at improving the reliability and survivability of objects. Examples of solving typical problems of power supply reliability are given. Tasks for independent work are given. The textbook is intended for students of higher educational institutions studying in the specialty "Electric power and electrical engineering".
66. Д10-22/99584
Надёжность и диагностика энергетических объектов : лабораторный практикум по курсу "Надёжность и диагностика энергетических объектов" для студентов, обучающихся по направлению подготовки "Управление в технических системах" / В. А. Шихин, А. К. Абд-Эльрахим, А. Е. Коченгин, Д. С. Обычайко ; Министерство науки и высшего образования Российской Федерации, Национальный исследовательский университет "МЭИ". – Москва : Изд-во МЭИ, 2022. – 42 с. – ISBN 978-5-7046-2523-0. – Текст : непосредственный.
Abstract: It is intended for the formation of knowledge on modern methodology and automation of solving problems of diagnostics and monitoring of complex technical systems. It is intended for students of IVT And studying in the direction of training "Management in technical systems".
67. Надёжность циркуляционных контуров : учебное пособие / В. А. Суслов, С. В. Антуфьев, В. А. Ганичев, В. А. Кучмин. – DOI: https://doi.org/10.23682/102446. – Санкт-Петербург : Санкт-Петербургский государственный университет промышленных технологий и дизайна, 2018. – 41 c. – URL: https://www.iprbookshop.ru/102446.html (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook contains the basic concepts, definitions and calculation equations for hydrodynamics, heat and mass transfer during vaporization, necessary for the calculations of circulation circuits with natural and forced circulation to check their reliability. The manual is compiled in accordance with the requirements of state educational standards, contains the necessary material on the discipline, and therefore can be used as a lecture summary for students of thermal power engineering studying in the direction of 13.03.01 "Thermal power engineering and heat engineering".
68. Надёжность электроснабжения : учебное пособие / И. Н. Воротников, М. А. Мастепаненко, И. К. Шарипов, С. В. Аникуев. – Ставрополь : АГРУС, 2018. – 64 c. – URL: https://www.iprbookshop.ru/92990.html (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The theoretical foundations of the reliability of power supply systems are outlined. Reliability indicators are given, failure models are considered, methods for calculating the reliability of non-recoverable and recoverable systems are considered. In the textbook, the main provisions of the theory of reliability are supplemented with examples of problem solving, which allows you to strengthen the necessary knowledge in the process of studying the discipline "Reliability of power supply".
69. Ж2-21/70658
Надёжность энергетического оборудования энергосистем в условиях цифровизации / М. М. Султанов, Э. К. Аракелян, М. Г. Тягунов [и др.]; под общей редакцией М. М. Султанова. – Москва : Спектр, 2021. – 274 с. – ISBN 978-5-4442-0160-2. – Текст : непосредственный.
Abstract: The results of the analysis of data on modes, technical condition of equipment and the implementation of programs for the restoration of technical systems for the development of new approaches and integrated technical solutions for energy companies in a market and digital economy are presented. Theoretical aspects and methodological approaches to the study and assessment of the reliability of power equipment of generating and energy systems in the conditions of digital transformation are considered. Algorithms for monitoring and diagnostics of power equipment using digital technologies are given. Mathematical models for assessing the technical condition of power equipment in terms of reliability and efficiency are considered.
70. Д10-20/80596
Назарычев, А. Н. Надёжность и оценка технического состояния оборудования систем электроснабжения : учебное пособие / А. Н. Назарычев, Д. С. Крупенёв ; Российская академия наук, Сибирское отделение, Институт систем энергетики им. Л. А. Мелентьева [и др.]. – Новосибирск : Наука, 2020. – 223 с. – ISBN 978-5-02-038810-9. – Текст : непосредственный.
Abstract: The features of modern power supply systems, the main causes of failures and problems arising during the operation of electrical equipment, existing approaches to assessing the actual condition and improving the formation of a program of technical impacts while maintaining the reliability of equipment of power supply systems are considered.
71. Пеленко, В. В. Надёжность источников и систем теплоэнергоснабжения промышленных предприятий. Ч.1. Основы теории : учебное пособие / В. В. Пеленко, А. А. Верхоланцев, А. М. Хлыновский. – Санкт-Петербург : Санкт-Петербургский государственный университет промышленных технологий и дизайна, 2020. – 101 c. – ISBN 978-5-91646-247-0. – URL: https://www.iprbookshop.ru/118399.html (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook has been prepared in accordance with the curriculum and work program of the discipline "Reliability of sources and systems of heat supply of industrial enterprises" for university students studying in the direction of training 13.03.01 "Heat power engineering and heat engineering" (profile: "Industrial heat power engineering"). The manual discusses the basic concepts and definitions of reliability theory, the physical nature and patterns of changes in the technical condition of thermal power equipment; factors determining the intensity of damage accumulation; methods of obtaining and analyzing information about failures and malfunctions. The manual can be useful for masters of the direction 13.04.01 "Thermal power engineering and heat engineering" (profiles: "Technology of production of electric and thermal energy", "Heat and mass transfer processes and installations"), as well as for graduate students and engineering and technical workers of enterprises of the thermal power complex.
72. Д10-20/79591
Повышение надёжности функционирования электрических аппаратов и электрооборудования систем электроснабжения : монография / Е. И. Грачева, И. В. Ившин, А. Н. Горлов, А. Н. Алимова. – Казань : Отечество, 2020. – 238 с. – ISBN 978-5-9222-1386-8. – Текст : непосредственный.
Abstract: The monograph deals with the development of methods and models for assessing and improving the reliability of the functioning of electrical devices and electrical equipment, which allows improving the operational characteristics of power supply systems. The analysis of probabilistic characteristics of reliability of low-voltage switching devices and cable lines on the basis of statistical data of equipment operation is carried out. The permissible multiplicities of exceeding the resistance of contact connections of low-voltage devices under the conditions of technical operation are determined on the basis of experimental data of thermal imaging examination. Studies of technical transformers have been carried out taking into account operating modes.
73. Д11-21/1615
Повышение эффективности, надёжности и экологической безопасности автоматизированных систем теплоснабжения : монография / А. В. Пилипенко, С. П. Петров, Н. И. Маркин, О. С. Никитенко ; Министерство науки и высшего образования Российской Федерации, Орловский государственный университет имени И. С. Тургенева. – Орёл : ОГУ им. И. С. Тургенева, 2021. – 328 с. – ISBN 978-5-9929-0960-9. – Текст : непосредственный.
Abstract: The analysis of the general state of combined heat supply systems is presented. The factors influencing the efficiency and reliability of temperature control of buildings heated from combined heat supply systems are considered. The analysis of the existing management model is given. The features of thermal and hydraulic modes of automatic control conditions are disclosed. The results of modeling combined heat supply systems are presented.
74. Д10-18/67945
Пюкке, Г. А. Некоторые вопросы анализа надёжности и диагностики технических систем : монография / Г. А. Пюкке ; Камчатский государственный технический университет. – Петропавловск-Камчатский : Изд-во КамчатГТУ, 2018. – 134 с. – ISBN 978-5-328-00385-8. – Текст : непосредственный.
Abstract: The work is devoted to the problems of reliability and diagnostics of the state of technical systems during their operation. The results of scientific research in the field of technical diagnostics and reliability theory are presented. New models and methods of proactive diagnostics and maintenance of reliability of the operated systems are developed, the general provisions of reliability and technical diagnostics in the light of their use at the present stage of development, operation and control of technical systems are outlined. Theoretical and methodological aspects of assessing the current state of technical devices are considered. The main tasks arising in the development of models and methods for diagnosing electrical devices based on matrix transformations are set. The book is intended for specialists in the field of operation of electric power systems, graduate students and students of technical specialties of universities.
75. Тетеревков, И. В. Надёжность систем автоматизации : учебное пособие / И. В. Тетеревков. – Москва ; Вологда : Инфра-Инженерия, 2019. – 356 с. – ISBN 978-5-9729-0308-5. – URL: https://znanium.com/catalog/product/1048725 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The main indicators and calculation methods of reliability theory and their application are considered. The issues of redundancy, technical diagnostics and testing of automation systems are highlighted. For students of technical universities and specialists in the field of automation of technological processes and production. It can be used to get acquainted with the basics of reliability theory as a theoretical discipline.
76. Тремясов, В.А. Теория надёжности в энергетике. Надёжность систем генерации, использующих ветровую и солнечную энергию : учебное пособие / В. А. Тремясов, Т. В. Кривенко. – Красноярск : Сиб. федер. ун-т, 2017. – 164 с. – ISBN 978-5-7638-3749-0. – URL: https://znanium.com/catalog/product/1031885 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The evaluation of models and methods for calculating the reliability of generation systems built using renewable energy sources in small isolated power systems is given. Examples of solving practical problems for obtaining the necessary indicators of adequacy and economic evaluation of generating systems containing wind, solar energy and energy storage facilities are considered. It is intended for undergraduates studying in the field of training 13.04.02 "Electric power and electrical engineering".
77. Ж2-19/66320
Труханов, В. М. Надёжность энергетического оборудования тепловых электростанций / В. М. Труханов, М. М. Султанов; под общей редакцией В. М. Труханова. – Москва : Спектр, 2019. – 374 с. – ISBN 978-5-4442-0145-9. – Текст : непосредственный.
Abstract: Theoretical and practical issues of reliability of power equipment of generating systems at all stages of their life cycle are considered. Methods, mathematical models and techniques for achieving and ensuring a high level of reliability of thermal power plant power equipment at the stages of design, production and operation, including taking into account control actions expressed in the form of design, technological and operational parameters, are given. Methods of extending the service life of thermal power plant equipment are considered in detail. The obtained statistical data of the failure flow parameter for the long-term operation of steam turbines of various capacities are recommended to be used in the design calculations of the reliability of newly created analog turbines. It is intended for specialists working in the field of research, operation and repair of power equipment, teachers, postgraduates, masters and bachelors of technical universities.
78. Хорольский, В. Я. Надёжность электроснабжения : учебное пособие / В. Я. Хорольский, М. А. Таранов. – Москва : ФОРУМ : ИНФРА-М, 2020. – 127 с. – (Высшее образование: Бакалавриат). – ISBN 978-5-00091-486-1. – URL: https://znanium.com/catalog/product/1089756 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The theoretical foundations of the reliability of power supply systems are outlined. Reliability indicators are given, failure models are considered, methods for calculating the reliability of non-recoverable and recoverable systems are considered. An assessment of the impact of power supply interruptions on the damage caused to consumers is given, recommendations for ensuring the required level of reliability in the design and operation of electrical installations are considered. The manual is recommended for students of higher educational institutions, college students, as well as electrical workers.
79. Д10-19/84817
Шилин, А. Н. Надёжность электроснабжения : учебно-методическое пособие / А. Н. Шилин, А. Г. Сошинов, О. И. Елфимова ; Минобрнауки России, Волгоградский государственный технический университет, Камышинский технологический институт (филиал). – Волгоград : ВолгГТУ, 2019. – 103 с. – ISBN 978-5-9948-3271-4. – Текст : непосредственный.
Abstract: This paper summarizes the main indicators and comparative analysis of methods for calculating the reliability of power supply systems. Examples and tasks for calculating the simplest models of power supply systems are considered. For regular knowledge control, there are self-control questions at the end of each section. It is intended for bachelors of the direction 13.03.02 "Electric power and electrical engineering".
80. Алиев, В. К. Надёжность оборудования в морской нефтедобыче : учебное пособие / В. К. Алиев. – Москва ; Вологда : Инфра-Инженерия, 2019. – 144 с. – ISBN 978-5-9729-0261-3. – URL: https://znanium.com/catalog/product/1049185 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: Theoretical and applied issues in the field of assessing the reliability of drilling and oilfield equipment of offshore stationary platforms with a well cluster from the point of view of environmental protection are considered. Only those types of equipment whose failure can lead to the ingress of well products into the environment have been investigated: a complex of anti-blowout equipment and a system for collecting and preparing product transportation. For students of the specialty 130602 "Machinery and equipment of oil and gas fields" and other engineering specialties, as well as scientists and oilfield specialists.
81. Д10-19/80120
Аспекты надёжности и диагностики нефтегазовых объектов : монография / Б. В. Моисеев, Ю. Д. Земенков, М. Н. Чекардовский [и др.; под общ. ред. Ю. Д. Земенкова] ; Министерство науки и высшего образования Российской Федерации, Тюменский индустриальный университет. – Тюмень : ТИУ, 2019. – 422 с. – ISBN 978-5-9961-1904-2. – Текст: непосредственный.
Abstract: The paper presents the results of the authors' scientific research in the field of reliability and diagnostics of facilities, equipment of transportation systems and storage of hydrocarbons. Modern problems and tasks of diagnosing the linear part of oil and gas pipelines and technological equipment of stations, issues of managing the technical condition and reliability of facilities are considered. The paper identifies and proposes solutions to the most pressing problems of reliability and diagnostics of strategically important objects for the Russian Federation, including the largest transport highways, the Arctic zone and the Far North. Methodological and technological aspects of creating intelligent reliability monitoring systems are considered. The issues of operation and technical diagnostics of power equipment, ensuring reliability and efficiency of work are described in detail. A methodology for assessing the economic level of production, and methodological foundations for evaluating design solutions in the field of ensuring the reliability of oil and gas facilities are proposed. The monograph is intended for a wide range of specialists in the technical profile of the oil and gas industry engaged in scientific research, studying the processes of transportation and storage of hydrocarbon resources, studying in the bachelor's and master's degree program "Oil and gas business", specialty 21.05.05 specialization "Physical processes of oil and gas production", students of advanced training courses in oil and gas profile.
82. Д10-20/76092
Бабаев, С. Г. Эволюция надёжности в комплексах "качество – конкурентоспособность" нефтепромыслового оборудования = Evolution of reliability in "quality – competitiveness" complexes of oilfield equipment : международное научное издание / С. Г. Бабаев, В. Я. Кершенбаум, И. А. Габибов. – Москва ; Баку : НИНГ, 2020. – 410, [3] с. – ISBN 978-5-91961-311-4. – Текст: непосредственный.
Abstract: The book provides basic information related to the competitiveness and reliability of oilfield equipment, as well as engineering methods for assessing reliability characteristics under various laws of probability distribution of random variables. In particular, quantitative indicators for assessing the suitability of equipment are considered. Methods of rationing and ensuring reliability at the design stage are given. Mathematical models of equipment functioning, determination of rational periodicity of diagnostics, assessment of residual inter-repair resource of units and aggregates after the next dismantling have been developed. The results of research aimed at implementing effective methods to ensure the improvement of the quality and performance of certain types of equipment are presented. Methods of increasing the reliability and maintainability of assembly units and aggregates based on the formation of conditional subsystems are given.
83. Д10-19/74408
Галимуллин, М. Л. Повышение надёжности и срока службы элементов клапанной группы штанговых глубинных насосов : монография / М. Л. Галимуллин ; Министерство науки и высшего образования Российской Федерации, Филиал Федерального государственного бюджетного образовательного учреждения высшего образования "Уфимский государственный нефтяной технический университет" в г. Октябрьском. – Уфа : Изд-во УГНТУ, 2019. – 124 с. – ISBN 978-5-93105-417-9. – Текст : непосредственный.
Abstract: The results of research on the operation of a wide-bore valve of a rod depth pump are presented. Technological means and their elements allowing to increase the efficiency of rod depth pumps are considered. The theoretical foundations of the dynamics of technical means and elements of pumps are given, the results of theoretical studies, laboratory and field tests are given. This publication is intended for engineering and technical workers of oil and gas companies and departments, for students of technical universities studying oil and gas complex specialties.
84. Д10-20/86478
Горлов, И. В. Инновационные подходы в системе восстановления работоспособности технологических машин : монография / И. В. Горлов ; Минобрнауки России, Тверской государственный технический университет. – Тверь : Тверской гос. технический ун-т, 2020. – 187 с. – ISBN 978-5-7995-1087-9. – Текст : непосредственный.
Abstract: A new approach to the restoration of technological machines of the peat complex is proposed, statistical data on the operation of a number of peat machines are considered, a simulation model for predicting the technical condition of peat machines and possible methods of their diagnostics, repair and restoration used in practice are proposed. Studies of tribotechnical properties of reconstructed working surfaces of restored tribo-nodes are presented. It is intended for scientists, engineers, postgraduates and students of mechanical engineering specialties.
85. Н/15007/4/12(2020)
Горный информационно-аналитический бюллетень : научно-технический журнал. – Москва : Горная книга, 1992 – . – ISSN 0236-1493. – Текст : непосредственный.
№ 4, спец. вып. 12(2020) : Повышение надёжности функционирования системы обеспечения безопасности труда угледобывающего предприятия / А. В. Галкин. – 2020. – 30 с.
Abstract: The urgency of the need to improve the reliability of the functioning of the occupational safety system at Russian coal mining enterprises is revealed, due to the fact that this system does not fully cope with its purpose – ensuring an acceptable level of injury risk, and the functioning of this system using the reliability criterion is considered. The regularities of occupational injuries and structural and functional deformation of the occupational safety system, as well as the scheme of the occupational safety system are presented. The content of the definition of the reliability of the functioning of the occupational safety system is disclosed and complementary principles of the organization of this system are proposed, the implementation of which will increase the reliability of its functioning, reduce injuries at coal mining enterprises.
86. Д10-20/83115
Давыдов, А. Ю. Основы теории надёжности : учебное пособие / А. Ю. Давыдов, О. В. Давыдова ; Министерство науки и высшего образования Российской Федерации, Уфимский государственный нефтяной технический университет, Филиал в г. Октябрьском. – Уфа : Изд-во УГНТУ, 2020. – 125 с. – ISBN 978-5-93105-439-1. – Текст : непосредственный.
Abstract: The textbook discusses the basic concepts of reliability theory. Calculations of quantitative reliability indicators are given. The textbook is intended for students in the field of training "Oil and gas business", specialty "Oil and gas engineering and technology" specialization "Development and operation of oil and gas fields" and can be used by graduate students, scientific and engineering workers.
87. Д10-19/79949
Дейнеко, С. В. Обеспечение технологической и конструктивной надёжности систем трубопроводного транспорта нефти, нефтепродуктов и газа / С. В. Дейнеко ; Российский государственный университет нефти и газа имени И. М. Губкина (Национальный исследовательский университет). – Москва : ЦентрЛитНефтеГаз, 2019. – 247 с. – ISBN 978-5-902665-72-4. – Текст : непосредственный.
Abstract: The textbook outlines the fundamentals of the theory of reliability of oil and gas pipeline transport systems and their practical application for solving scientific and engineering problems. The analysis and classification of failures of gas and oil pipelines, as well as processing of statistical data on failures are given. The methods of ensuring reliability at the design stage and at the operational stage are considered.
88. Д10-19/79951
Дейнеко, С. В. Оценка надёжности газонефтепроводов. Практические задачи с решениями / С. В. Дейнеко ; Российский государственный университет нефти и газа (национальный исследовательский университет) имени И. М. Губкина. – Москва : ЦентрЛитНефтеГаз, 2019. – 101 с. – ISBN 978-5-902665-80-09. – Текст : непосредственный.
Abstract: The problems of constructing and transforming structural reliability schemes, the functions of the operability of gas and oil pipeline systems, assessing the reliability of gas and oil pipeline facilities based on the construction of structural reliability schemes with a reducible and irreducible structure, different types of equipment redundancy, the laws of failure distribution over time, processing failure statistics are considered. The task book consists of two parts: collection of problems and their solutions.
89. Д10-19/79950
Дейнеко, С. В. Построение моделей надёжности объектов газонефтепроводов в Excel : [учебное пособие] / С. В. Дейнеко ; Российский государственный университет нефти и газа (национальный исследовательский университет) имени И. М. Губкина. – Москва : ЦентрЛитНефтеГаз, 2019. – 108 с. – ISBN 978-5-902665-74-8. – Текст : непосредственный.
Abstract: The construction of reliability models of the main objects of gas and oil pipelines by computer modeling in Excel is considered. The main stages of building models and stages of computer modeling for solving problems of assessing the reliability of gas and oil pipelines are described. A detailed description and examples of the use of various computer modeling methods for solving reliability engineering problems in the Excel environment are provided. The construction of models of gas and oil pipeline facilities is carried out on the basis of real statistical data.
90. Д10-18/62254
Демченко, В. Г. Магистральные трубопроводы. Надёжность. Условия работы и разрушений = Arterial pipelines. Reliability. Conditions of work and destructions / В. Г. Демченко, Г. В. Демченко. – [2-е изд., перераб. и доп.]. – Москва : Недра, 2018. – 555, [1] с. – ISBN 978-5-8365-0493-9. – Текст : непосредственный.
Abstract: The issues of design, evaluation of reliability and completeness of acceptance tests of trunk pipelines are considered. On the basis of accumulated statistical data, specific values of reliability indicators of a single gas pipeline were obtained and discussed. At the present level, the issues of the working conditions of gas pipelines, as well as the conditions of their longitudinal and annular destruction are outlined. The problem of longitudinal destruction of gas pipelines is considered as a dynamically developing five-stage process with an assessment of the impact on the catastrophic destruction of the mechanical characteristics of pipe steel and the gas-dynamic features of the areas adjacent to the rupture site. For the first time, from the position of gas dynamics, the necessary and sufficient conditions for unloading pipes from annular stresses and the beginning of braking of the main crack during longitudinal destruction of gas pipelines of extended length were determined. The energy principles of determining the critical length of the main crack and estimating the total length of longitudinal fractures of gas pipelines are described. The possibility of spontaneous ignition of a mixture of gas and air and the detonation nature of the propagation of destruction of gas pipelines is shown. The analysis of operational and temperature working conditions and causes of failures and damages of gas pipelines is given. Recommendations for laying pipelines taking into account natural hazards and processes are given. For scientists and specialists of the gas and oil industry.
91. Д10-18/68160
Земенкова, М. Ю. Методологическое обеспечение экспертных систем мониторинга показателей надёжности объектов трубопроводного транспорта углеводородов : монография / М. Ю. Земенкова ; Министерство науки и высшего образования Российской Федерации, Тюменский индустриальный университет. – Тюмень : ТИУ, 2018. – 410 с. – ISBN 978-5-9961-1588-4. – Текст : непосредственный.
Abstract: The paper highlights the results of scientific research in the field of developing methodological support for expert systems for monitoring reliability indicators of hydrocarbon pipeline transport facilities. The concept of a decision support system shell is proposed for implementation in the monitoring system of pipeline transport technological processes using modern geo–positioning and diagnostics systems, which allows for the management of technological processes at three levels of management - operational, tactical, strategic.
92. Крапивский, Е. И. Надёжность нефтегазовых объектов в арктических условиях : учебное пособие / Е. И. Крапивский, Н. С. Вишневская, Е. Е. Яворская. – Москва ; Вологда : Инфра-Инженерия, 2020. – 216 с. – ISBN 978-5-9729-0482-2. – URL: https://znanium.com/catalog/product/1167770 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The basics of the construction and operation of trunk pipelines in complicated engineering and geological conditions are described, basic terms and concepts are given. The statistics of pipeline accidents are given, expert systems are described, and a methodology for assessing the degree of risk of accidents on main oil and gas pipelines is proposed. For students of oil and gas specialties.
93. Д10-20/83458
Крапивский, Е. И. Физико-технические методы и средства диагностики оборудования при транспорте нефти и газа : учебное пособие / Е. И. Крапивский, М. Ю. Земенкова, Д. А. Борейко ; Министерство науки и высшего образования Российской Федерации, Тюменский индустриальный университет. – Тюмень : ТИУ, 2020. – 228 с. – ISBN 978-5-9961-2205-9. – Текст : непосредственный.
Abstract: The textbook has been developed in accordance with the state standards of higher education in the field of bachelor's, master's and certified specialist training. The fundamentals of technical diagnostics and the theory of reliability of oil and gas equipment and main oil and gas pipelines are considered. Statistical methods of recognition and separation in the feature space, metric and logical diagnostic methods, information theory and its application to diagnostic tasks are described. The expert system for the analysis and forecast of the technical condition of oil and gas equipment, pipelines, developed by the authors and Professor V. V. Lomtadze, is considered.
94. Д10-18/68012
Лазарев, С. А. Оценка технического состояния линейной части магистрального газопровода по динамике эксплуатационного положения : монография / С. А. Лазарев, С. А. Пульников, Ю. С. Сысоев ; Министерство науки и высшего образования Российской Федерации, Тюменский индустриальный университет. – Тюмень : ТИУ, 2018. – 110 с. – ISBN 978-5-9961-1785-7. – Текст : непосредственный.
Abstract: The monograph contains information about the results of a study on the development of a methodology for assessing and predicting the technical condition of the linear part of the main gas pipelines according to the II limit state. A mathematical model of the spatial-temporal curve of the pipeline position is given, taking into account the technological limitations of the spatial position monitoring systems used in Gazprom Transgaz Surgut LLC, the issues of describing typical design schemes for laying the linear part of the main gas pipeline are considered and their operational limitations are analyzed when deviating from the design position. The book is intended for specialists in the field of design and operation of pipeline systems, design engineers, as well as for students and postgraduates involved in assessing the technical condition of trunk pipelines.
95. Николаев, А. К. Надёжность горных машин и оборудования : учебное пособие для вузов / А. К. Николаев, С. Л. Иванов, В. В. Габов. – Санкт-Петербург : Лань, 2021. -100 с. – ISBN 978-5-8114-7092-1. – URL: https://e.lanbook.com/book/169767 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The basic terms and provisions of the theory of reliability, methods for improving the reliability of mining machines are described. Formulas for calculating reliability indicators and methods for substantiating structural schemes of underground complexes in the analysis of the reliability level are given. The ways of determining the frequency of prevention of equipment during its operation are considered. The sequence of formation of the strategy of maintenance of mining equipment is recommended. Examples of calculating reliability characteristics when performing a computational and graphical task for the course "Reliability of mining machinery and equipment" for students of higher educational institutions in the specialty "Mining" are given.
96. Д10-19/79724
Оценка надёжности промысловых трубопроводов = Assessment of the reliability of industrial pipelines : учебное пособие / С. В. Якубовская, Н. Ю. Сильницкая, Е. Ю. Иванова, И. Ф. Шагбанов ; Министерство науки и высшего образования Российской Федерации, Тюменский индустриальный университет. – Тюмень : ТИУ, 2019. – 153 с. – ISBN 978-5-9961-2167-0. – Текст : непосредственный.
Abstract: The textbook outlines the basics of calculating the theory of reliability of field pipelines, the basic concepts of reliability theory, mathematical methods of reliability theory, the methodology for calculating the constructive reliability of field pipelines from the perspective of probability theory by limit states. Examples of solving applied problems of reliability theory using a PC are given. It is intended for students of higher educational institutions studying in bachelor's and master's degree courses 21.03.01 "Oil and gas business", 15.04.03 "Applied Mechanics".
97. Ж2-20/66558
Репин, Д. Г. Технологическая надёжность магистральных газонефтепроводов : учебное пособие / Д. Г. Репин, В. Г. Рыбак. – Ростов-на-Дону : Феникс, 2020. – 412, [1] с. – ISBN 978-5-222-32355-7. – Текст : непосредственный.
Abstract: The textbook has been prepared in accordance with the Federal State Educational Standard of Higher Education in the direction of 21.03.01 "Oil and gas business". The manual presents the basic concepts, definitions, elements of theory and practice of reliability of gas turbine gas pumping units, CS, GTS. The past and current state of reliability in the gas transportation industry are considered, promising directions of development of CS, gas turbine GPA and other equipment from the point of view of reliability are reflected. The manual has a practical orientation, is intended for students of higher education institutions studying in the areas of 21.03.01 "Oil and gas business", 21.04.01 "Oil and gas business".
98. Ж2-19/68368
Староконь, И. В. Проблемы оценки ресурса морских нефтегазопромысловых сооружений ферменного типа с учетом влияния окружающей среды = problems of estimating the resource of offshore oil and gas facilities of jackets typetaking into account the environmental impact / И. В. Староконь. – Москва : Издательский центр РГУ нефти и газа (НИУ) им. И. М. Губкина, 2019. – 215, [12] с. – ISBN 978-5-91961-319-0. – Текст : непосредственный.
Abstract: The Russian Federation has significant oil and gas resources located at the bottom of sea areas. The extraction of these resources is carried out using offshore stationary platforms. Since offshore platforms are operated in difficult natural and climatic conditions, which are characterized by significant loads and environmental influences, fatigue processes occur in the main structural elements and welded joints of these platforms, which can lead to an emergency situation. To prevent the occurrence of an emergency, it is necessary to repair or replace the elements and welded joints of the platform. Such a decision on repair or replacement can be made on the basis of an assessment of the residual life for the main structural elements and welded joints of the platform, taking into account the accumulated damage. The paper presents a technique that allows us to estimate the value of the endurance limit for elements of a marine platform with accumulated fatigue damage. In addition, based on the conducted experimental studies, the author evaluated the effectiveness of welding joint repair technologies in terms of extending their service life. The paper also investigates the influence of corrosion processes and temperature and vibration-vibration effects on the resource of the offshore platform and suggests measures to extend the resource of the offshore platform. A method of thermal diagnostics has also been developed that allows determining the depth of corrosion defects based on data on the temperature difference between damaged corrosion and defect-free zones.
99. Д10-19/76364
Татлыев, Р. Д. Основы надёжности объектов транспорта нефти и газа : учебное пособие / Р. Д. Татлыев, А. В. Гончарова, А. П. Янукян ; Министерство науки и высшего образования Российской Федерации, Тюменский индустриальный университет, Филиал ТИУ в г. Сургуте, Кафедра "Нефтегазовое дело". – Ставрополь : Логос, 2019. – 94 с. – ISBN 978-5-907258-07-5. – Электронная копия доступна на сайте Научной электронной библиотеки eLIBRARY. – URL: https://www.elibrary.ru/item.asp?id=41219234 (дата обращения: 21.07.2022). – Access mode: for authorization. users.
Abstract: This textbook is intended to study the theoretical foundations and practical application of basic calculations when considering the reliability of oil and gas transportation facilities, the development of work production projects (PPR), construction organization projects (PIC). The textbook discusses the reliability of oil and gas transportation facilities. This manual is aimed at students of higher educational institutions, students of retraining courses.
100. Д10-18/55288
Хасанов, Р. Р. Напряженно-деформированное состояние и обеспечение надёжности тройников подземных трубопроводов : монография / Р. Р. Хасанов, С. М. Султанмагомедов. – Уфа : Первая тип., 2018. – 123 с. – ISBN 978-5-6040877-1-8. – Текст : непосредственный.
Abstract: The monograph is devoted to theoretical and practical problems of studying the stress-strain state of underground pipeline tees. The main causes of abnormal situations on the connecting part are discussed. The analysis of existing and promising methods for monitoring the stress state of pipe metal and welded joints is carried out. Variants of compensation and stabilization of mechanical stresses in the branch pipe zone of the tee are proposed. A brief description and the principle of operation of the developed device for monitoring the stress state of underground tees are given. The results of experimental studies are presented. The technology of mounting a reinforced concrete stabilizer on a tee node is described. The monograph is intended for teachers, postgraduates and students of higher technical educational institutions.
101. Д10-18/62139
Хачатрян, С. А. Методы повышения надёжности конвейерного транспорта угольных шахт : монография / С. А. Хачатрян, В. Г. Мерзляков ; Министерство образования и науки РФ, Московский политехнический университет. – Москва ; Пенза : Изд-во ПГУ, 2018. – 77 с. – ISBN 978-5-907102-31-6. – Текст : непосредственный.
Abstract: The analysis of the state of the problem of reliability of mine conveyor systems is given. Methods of increasing the reliability of systems based on the constructive improvement of conveyors (sliding supports) and the use of multi-drive conveyors are shown. The features of the calculation of multi-drive conveyors are described. The publication is intended for specialists of mining enterprises, design research organizations, and can also be used by university students of the specialty 13.04.00 "Mining machinery and equipment".
102. Д10-19/69410
Хачатрян, С. А. Надёжность конвейерного транспорта угольных шахт : учебное пособие / С. А. Хачатрян, В. Г. Мерзляков ; Министерство образования и науки РФ, Московский политехнический университет. – Москва ; Пенза : Изд-во ПГУ, 2019. – 113 с. – ISBN 978-5-907185-32-6. – Текст : непосредственный.
Abstract: The main provisions of the construction of mathematical models of reliability of technical (conveyor) systems based on the theory of Markov processes are presented. The reliability of conveyor systems of coal mines is analyzed. Methods of increasing the reliability of systems based on the constructive improvement of conveyors (sliding supports) and the use of multi-drive conveyors are given. The publication was prepared at the Department of "Engineering and Technology of Mining and Oil and Gas Production" of Moscow Polytechnic University and is intended for students studying in the specialty 21.05.04 "Mining", and can also be used by specialists of mining enterprises operating conveyor systems.
103. Щипачев, А. М. Технологическое обеспечение надёжности нефтегазового оборудования : учебное пособие для вузов / А. М. Щипачев, Г. Х. Самигуллин. – 2-е изд., стер. – Санкт-Петербург : Лань, 2020. – 68 с. – ISBN 978-5-8114-6643-6. – URL: https://e.lanbook.com/book/151197 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The basic concepts of reliability in connection with the operation of oil and gas equipment are considered. The influence of manufacturing technology on the reliability of equipment is shown. A detailed system analysis of the influence of technology on the reliability characteristics associated with operation through the formed properties (parameters) of the surface layer is given. The specific types of mechanical and surface-hardening treatment, welding operations used in the manufacture of oil and gas equipment are considered. It is intended for undergraduates studying in the field of training "Oil and gas business", and graduate students in the field of training "Geology, exploration and development of minerals".
2.4. Military complex and space
104. Алчинов, В. И. Надёжность технических систем военного назначения : учебное пособие / В. И. Алчинов, А. И. Сидоров, Г. К. Чистова. – Москва ; Вологда : Инфра-Инженерия, 2019. – 324 с. – ISBN 978-5-9729-0389-4. – Text : electronic. – URL: https://znanium.com/catalog/product/1048749 (дата обращения: 21.07.2022). – Access mode: for authorization. users.
Abstract: The fundamentals of the theory of reliability of weapons and weapons systems, methods for assessing reliability indicators, improving it and ensuring it in the design, production and operation of weapons samples are described. For students of specialties 17.05.01 "Ammunition and fuses" and 27.05.01 "Special organizational and technical systems". The materials of the manual can be useful to graduate students of the direction 56.06.01 in the training profiles 20.02.14 "Armament and military equipment. Complexes and systems for military purposes" and 02/20.21 "Means of destruction and ammunition".
105. У4292/2020/3
Козырев, Г. И. Построение интеллектуальной измерительной системы контроля метрологической надёжности автоматизированного комплекса метрологического обслуживания вооружения и военной техники / Г. И. Козырев, Р. О. Лавров, В. Д. Усиков. – Текст : непосредственный // Измерение. Мониторинг. Управление. Контроль : научно-производственный журнал. – 2020. – № 3. – С. 16-24. – ISSN 2307-5538. – Текст : непосредственный.
Abstract: The relevance of this work is due to the need to improve the metrological reliability of automated complexes for metrological maintenance of weapons and military equipment using an intelligent measuring system for monitoring the drift of metrological characteristics in a given range under the influence of destabilizing factors. An approach to the construction of an intelligent measuring system for monitoring the metrological reliability of an automated metrological service complex, taking into account the peculiarities of its functioning, is considered. The structure of an intelligent measuring system for monitoring metrological reliability of an automated metrological service complex is presented. A method for constructing intelligent sensors for the stable functioning of an intelligent measuring system under the influence of destabilizing factors is proposed. The use of an intelligent measuring system for monitoring metrological reliability will ensure that an automated metrological maintenance complex performs a measuring task under the influence of various kinds of destabilizing factors.
106. Д10-19/78932
Новиков, В. В. Испытания и надёжность ракетно-космических систем : учебное пособие / В. В. Новиков, К. В. Чернышов, В. А. Серов ; Министерство науки и высшего образования Российской Федерации, Волгоградский государственный технический университет. – Волгоград : ВолгГТУ, 2019. – 182, [1] с. – ISBN 978-5-9948-3584-5. – Электронная копия доступна на сайте Научной электронной библиотеки eLIBRARY. – URL: https://www.elibrary.ru/item.asp?id=41558415 (дата обращения: 21.07.2022). – Access mode: for authorization. users.
Abstract: The manual is written in accordance with the Federal State Educational Standard for Higher Education in the specialty 24.05.01 – Design, production and operation of rockets and rocket and space complexes (specialization: "Launching devices, transport and installation equipment and maintenance facilities of launch complexes"). It is recommended for students of technical universities, engineering and technical workers of operational and design organizations.
107. Переездчиков, И. В. Анализ опасностей промышленных систем человек-машина-среда и основы защиты : учебное пособие / И. В. Переездчиков. – Москва : КноРус, 2020. – 781 с. – ISBN 978-5-406-07814-3. – URL: https://book.ru/book/934050 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The basics of hazard analysis and protection are outlined. Basic concepts, mathematical and system models, methods of qualitative and quantitative analysis, physical criteria, algorithms and characteristics are given. The dangers of well-structured systems are investigated on the basis of probability theory and reliability theory. The study of the risk of technical systems with great uncertainty is conducted on the basis of the theory of fuzzy sets. The model of a protective device as an integral part of the man–machine–environment system methodologically generalizes the theory of protection under energy influences. The performed calculations and examples bring the analysis of hazards and the basics of protection to the level of practical application.
108. Д10-18/53722
Похабов, Ю. П. Теория и практика обеспечения надёжности механических устройств одноразового срабатывания : монография / Ю. П. Похабов ; Сибирский федеральный университет. – Красноярск : СФУ, 2018. – 338 с. – ISBN 978-5-7638-3812-1. – Текст : непосредственный.
Abstract: The theoretical foundations and practical methods of ensuring the reliability of single and small-scale products with a low probability of failure are described. Using examples of mechanical devices for one-time operation of spacecraft, the possibility of solving reliability problems of unique products without using the mathematical apparatus of reliability theory is shown. The analysis of design and technological factors determining reliability is presented. An engineering and technical approach has been developed to ensure reliability at various stages of the life cycle, based on giving the developed product properties that contribute to the unconditional fulfillment of the official purpose. The methodology of design and technological analysis of reliability is given. Methods of design and technological support and reliability assessment of unique products are proposed. The principles and rules of design to ensure the required reliability are considered. It is intended for practicing engineers engaged in the development of mechanical devices for one-time operation. It can be useful to specialists in the field of reliability of unique highly responsible systems for various purposes.
109. Ж2-20/68492
Труханов, В. М. Надёжность артиллерийских систем / В. М. Труханов, А. Г. Тарнаев, М. П. Кухтик; под редакцией В. М. Труханова. – Москва : Спектр, 2020. – 308 с. – ISBN 978-5-4442-0153-4. – Текст : непосредственный.
Abstract: Theoretical and practical issues of reliability of complex systems such as artillery guns at all stages of their life cycle are considered.
110. Д10-19/63579
Уткин, В. С. Определение остаточной несущей способности и надёжности несущих элементов железобетонных конструкций на стадии эксплуатации : монография / В. С. Уткин, С. А. Соловьев ; Министерство науки и высшего образования Российской Федерации, Вологодский государственный университет. – Вологда : Вологод. гос. ун-т, 2019. – 127 с. – ISBN 978-5-87851-819-2. – Текст : непосредственный.
Abstract: The monograph is the first publication on mathematical modeling of conjugate heat transfer between viscous gas-dynamic flows and blunted anisotropic bodies under conditions of aerogasodynamic heating of hypersonic aircraft.
111. Д10-19/69627
Шевченко, С. Н. Методы оценки и подтверждения показателей надёжности систем ракетной и ракетно-космической техники по результатам ускоренных и форсированных испытаний / С. Н. Шевченко. – Москва : ПСТМ, 2019. – 75 с. – ISBN 978-5-00077-923-1. – Текст : непосредственный.
Abstract: The book develops methods for solving certain tasks that are important in practical terms for assessing and confirming the reliability indicators of rocket and rocket and space technology systems based on the results of such tests, as well as planning forced tests.
2.5. Construction, urban economy and housing and communal services
112. Д10-18/59129
Алябьев, В. А. Основы теории и методика определения параметров надёжности дорожно-строительных машин : монография / В. А. Алябьев, Е. И. Бердов, В. Н. Бондарь ; Южно-Уральский государственный университет (Челябинск), Автотракторный факультет. Кафедра колесных и гусеничных машин. – Челябинск : Изд. центр ЮУрГУ, 2018. – 220 с. – ISBN 978-5-696-04959-5 – Текст: непосредственный.
Abstract: The basic concepts and indicators of reliability of road construction machines (the condition of the object, defects, damage, failures, reliability, durability, resource, maintainability, preservation), as well as methods for calculating reliability indicators and micrometreage are described. The textbook is intended for university students studying under the bachelor's degree programs "Operation of transport and technological machines and complexes", "Ground transport and technological complexes", specialists in the field of technical service, repair and testing of road construction machines.
113. Д10-18/73598
Бенин, Д. М. Диагностика и надёжность гидравлических систем в условиях городского хозяйства : монография / Д. М. Бенин. – Москва : МЭСХ, 2018. – 201 с. – ISBN 978-5-6041356-3. – Текст: непосредственный.
Abstract: The monograph discusses methods for assessing the technical condition of hydraulic systems, as well as the main indicators affecting the technical condition of these systems in an urban environment. The publication is intended for researchers, postgraduates and engineers involved in the calculation and design of pressure hydraulic systems in urban conditions.
114. Д10-18/53469
Ведяков, И. И. Надёжность строительных конструкций. Теория и расчет / И. И. Ведяков, В. Д. Райзер. – Москва : АСВ, 2018. – 411 с. – ISBN: 978-5-4323-0259-5. – Текст: непосредственный.
Abstract: The book presents modern methods of analyzing the reliability of structures. It is noted that the calculation of building structures should be fully based on the theory of reliability based on probabilistic methods that allow a more objective assessment of the structure about its suitability for normal operation. The main provisions of the theory of reliability of building structures are presented. The analysis of the limit state method is given, and proposals are made to improve the methods of normalization of calculations based on probabilistic approaches. The problems of safety, risk, optimal level of reliability and survivability of structures are discussed. Probabilistic models of climatic and technological loads, mechanical properties of structures are considered, modern methods of calculating the probability of failure are described. The reliability of multi-element systems is analyzed, the probabilistic method of limit equilibrium is described, probabilistic problems of structural stability are considered. The influence of corrosion wear on reliability is investigated, the reliability of structures during operation is analyzed. The book is intended for design engineers, real estate valuation specialists, as well as for students and postgraduates of construction universities.
115. Дегаев, Е. Н. Эксплуатационная безопасность и надёжность объектов ЖКК : учебное пособие / Е. Н. Дегаев, М. Е. Дементьева, Г. А. Афанасьев. – Москва : МИСИ-МГСУ, ЭБС АСВ, 2020. – 47 c. – ISBN 978-5-7264-2195-7. – URL: https://www.iprbookshop.ru/101851.html (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook discusses the organization of professional activities in the field of safe and reliable operation of buildings and structures. The requirements of technical regulations for ensuring operational safety, as well as the basic concepts of the theory of operational reliability are considered. For students in the areas of training 08.03.01 Construction, profile "Technical operation of housing and communal complex facilities", 38.03.10 Housing and communal infrastructure.
116. Д10-20/86077
Дубраков, С. В. Влияние коэффициента вариации на надёжность кирпичной кладки : монография / С. В. Дубраков ; Минобрнауки России, Юго-Западный государственный университет (ЮЗГУ). – Курск : Университетская книга, 2020. – 83 с. – ISBN 978-5-907356-96-2. – Текст: непосредственный.
Abstract: The monograph provides an analysis of factors that have a negative impact on the reliability and durability of elements of stone structures of buildings and structures during operation. The monograph is intended for students of the 08.03.01 "Construction" training direction when studying the disciplines "Technological processes in construction", "Technology of construction of buildings and structures", performing final qualifying work and corresponds to the Federal state educational standard of the training direction.
117. Д11-20/518
Корольков, Д. И. Оценка остаточного ресурса строительных конструкций : монография / Д. И. Корольков ; Министерство науки и высшего образования Российской Федерации, Санкт-Петербургский государственный архитектурно-строительный университет. – Санкт-Петербург : СПбГАСУ, 2020. – 166, [1] с. – ISBN 978-5-9227-1190-6. – Текст (визуальный) : непосредственный.
Abstract: Various methods of calculating the residual resource of building structures are presented, including several methods developed by the author of this monograph. The advantages and disadvantages of each of the above methods are highlighted. The author has developed an algorithm for evaluating the results obtained when calculating using several methods at once. An expert system for predicting residual service life is presented.
118. Д10-18/68297
Кравченко, С. М. Эксплуатация и надёжность подъемно-транспортных, строительных и дорожных машин : учебное пособие / С. М. Кравченко, В. А. Слепченко ; Министерство науки и высшего образования Российской Федерации, Томский государственный архитектурно-строительный университет. – Томск : Изд-во ТГАСУ, 2018. – 291 с. – ISBN 978-5-93057-857-7. – Текст : непосредственный.
Abstract: The textbook contains material on the operation and reliability of lifting, construction and road vehicles (PTSDM). The basic information about the change in the technical condition and reliability of machines during operation is given, the patterns of wear and destruction of machine parts and ways to maintain them in technically sound condition are given. The issues of planning, organization and regulation of production processes, diagnostics, maintenance and repair of machines are considered. Recommendations are given for evaluating the efficiency of using the fleet of cars in terms of time and productivity. Much attention is paid to the issues of reliability and durability of machines. The manual is intended for students of higher educational institutions, as well as for specialists engaged in the field of operation and repair of machines and solving rational operational issues of a production and technical nature.
119. Д10-18/54107
Меренцова, Г. С. Повышение трещиностойкости и эксплуатационной надёжности асфальтобетонных покрытий автомобильных дорог : монография / Г. С. Меренцова ; Алтайский государственный технический университет им. И. И. Ползунова (Барнаул). – Барнаул : Изд-во АлтГТУ, 2018. – 107 с. – ISBN 978-5-7568-1259-6. – Текст : непосредственный.
Abstract: The monograph outlines the main provisions for improving the crack resistance and operational reliability of asphalt concrete road surfaces for the conditions of the West Siberian region. The main methodological and technological factors of increasing crack resistance and reliability of asphalt concrete coatings have been identified.
120. Д10-18/61923
Молдаванов, С. Ю. Вероятностные методы строительной механики и теория надёжности строительных конструкций : учебное пособие / С. Ю. Молдаванов ; Министерство образования и науки Российской Федерации, Кубанский государственный технологический университет. – Краснодар : КубГТУ, 2018. – 367 с. – ISBN 978-5-8333-0469-3. – Текст : непосредственный.
Abstract: The textbook discusses the tasks of verification and constructive calculations of structural elements that are under random force influence. Along with probabilistic calculation methods, a deterministic calculation is given for comparative analysis. Attention is paid to the optimal design of structures, as well as the optimal distribution of reliability between individual structural elements.
121. Мущанов, В. Ф. Основы теории надёжности строительных конструкций и сооружений : учебное пособие / В. Ф. Мущанов, Г. А. Котов, А. Н. Оржеховский. – Макеевка : Донбасская национальная академия строительства и архитектуры, ЭБС АСВ, 2020. – 196 c. – URL: https://www.iprbookshop.ru/114883.html (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook is intended for postgraduates and undergraduates dealing with the reliability of building structures and structures. Various modern theoretical and practical approaches to calculating the probability of trouble-free operation are consistently considered, the minimum necessary mathematical apparatus is given, on the basis of which the material of the publication is presented. Also included in the manual are the author's developments on the study of the reliability of building structures.
122. Поливода, Ф. А. Надёжность систем теплоснабжения городов и предприятий легкой промышленности : учебник / Ф. А. Поливода. – Москва : ИНФРА-М, 2020. – 170 с. – (Высшее образование: Бакалавриат). – ISBN 978-5-16-011830-7. – URL: https://znanium.com/catalog/product/1048496 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook outlines the basic principles and methods of building highly reliable water heating systems intended for use in the municipal and industrial sectors of urban thermal energy. The fundamental concepts of reliability theory, methods for calculating the reliability of technical devices, problems of redundancy, durability of the heat network, new methods for creating backup power sources for the boiler room of textile factories are considered in detail. The publication meets the requirements of the Federal State Educational Standard of Higher Education of the latest generation. The textbook is intended for students of all forms of training in the areas of training 29.03.02 "Technologies and design of textile products", 15.03.04 "Automation of technological processes and production", will be useful for training undergraduates and postgraduates of the above-mentioned areas, as well as for engineering and technical workers and students of advanced training schools.
123. Д10-20/84459
Примеры и причины аварий сооружений. Вопросы оценки и обеспечения качества строительных объектов, надежной работы оснований и фундаментов в условиях меняющихся природных и техногенных воздействий / М. В. Королев, В. Н. Егоров, А. Н. Власов [и др.] ; Институт прикладной механики РАН, Центр экспертиз исследований и испытаний в строительстве, Московский государственный строительный университет. – Москва : Сам Полиграфист, 2020. – 215 с. – ISBN 978-5-00166-250-1. – Текст : непосредственный.
Abstract: Examples of accidents of buildings and structures at various stages of the object's life cycle and their statistics, depending on the causes of occurrence, are given. The general issues of ensuring the quality of construction are considered, the algorithm of the rating system of expert assessment of the reliability of the main elements of the construction object and the entire system as a whole is proposed. Special attention is paid to the reliability of the foundations and foundations, including when engineering and geological conditions change during the operation of the structure under the influence of natural and man-made factors. A brief overview of the equipment used for the inspection of structures and quality control of work is given.
124. Д10-20/77140
Сандан, Н. Т. Теория эксплуатационной надёжности машин : лекционный курс: учебное пособие / Н. Т. Сандан, И. С. Брылев, С. А. Евтюков. – Санкт-Петербург : Петрополис, 2020. – 195 с. – ISBN 978-5-9676-1176-6. – Текст : непосредственный.
Abstract: The lecture course includes 16 lectures and 35 typical tasks collected separately in the Appendix. A systematic presentation of the main theoretical provisions of operational reliability of construction and reclamation machines is given. In particular, the issues of reliability, durability, maintainability and safety of machines are considered; their adaptability to fast and high-quality performance of maintenance and repair operations; the effectiveness of diagnostics in troubleshooting and forecasting of residual life. The methods of planning and calculation of spare parts are described in detail. For students of the specialty "Lifting, transport, construction, road machinery and equipment" and mechanical engineers who are engaged in the operation of construction and reclamation equipment.
125. Д10-18/54001
Синельников, А. Ф. Организация технического обслуживания и текущего ремонта подъемно-транспортных, строительных, дорожных машин и оборудования : учебник / А. Ф. Синельников. – Москва : Академия, 2020. – 334, [1] с. – ISBN 978-5-4468-9705-6. – Текст : непосредственный.
Abstract: The textbook discusses the technical operation of lifting and transport, construction, road machinery and equipment; ensuring their operability, reliability indicators and factors that reduce reliability, types of malfunctions and failures of machinery and equipment; destructive processes and patterns of wear of parts, transportation, storage and preparation of machinery and equipment for operation, organization of their maintenance and repair, types of fuels, lubricants and technical fluids used, characteristics of works carried out during maintenance and current repair of machinery and equipment, their main types related to the engine, electrical equipment, transmission, chassis, control mechanisms, metal structures and working equipment; ensuring safety during operation of various machines and equipment. The basics of designing zones, sites and workshops for maintenance and routine repairs of lifting, construction, road machinery and equipment are given. For students of secondary vocational education institutions.
126. Д10-19/71512
Соловьёв, Н. П. Вероятностные методы теории надёжности строительных конструкций : учебное пособие / Н. П. Соловьёв ; Министерство науки и высшего образования Российской Федерации, Поволжский государственный технологический университет. – Йошкар-Ола : Поволжский гос. технологический ун-т, 2019. – 204 с. – Текст : непосредственный.
Abstract: The textbook outlines the basic concepts of probability theory and mathematical statistics. The essence of the semi–probabilistic method of calculating building structures - calculation by limit states is considered. Statistical patterns of loads, environmental influences and strength of materials are shown. The main methods of calculating the reliability of simple and complex construction systems are determined. Examples of probabilistic calculations in the design and evaluation of the reliability of building structures are given. For students of the specialty 08.05.01 "Construction of unique buildings and structures", undergraduates and postgraduates of construction institutes, as well as engineering and technical workers of scientific and design organizations.
127. Д10-18/69607
Эксплуатационная надёжность гидротехнических сооружений : учебное пособие / Ф. К. Абдразаков, Т. А. Панкова, О. В. Михеева, С. С. Орлова ; Министерство сельского хозяйства Российской Федерации, Саратовский государственный аграрный университет им. Н. И. Вавилова. – Саратов : Саратовский ГАУ, 2018. – 141 с. – ISBN 978-5-9999-2968-6. – Текст : непосредственный.
Abstract: The textbook contains systematized materials on the study of the disciplines "Operation and monitoring of systems and structures", "Operation of engineering structures of natural and man-made systems" for students in the system of higher professional education of full-time and part-time forms of education in the direction of bachelor's and master's degree "Environmental management and water use". The textbook is aimed at developing students' skills in assessing the operational condition and conducting instrumental and field studies of hydraulic structures. The textbook was reviewed and recommended for publication at the meeting of the Department "Construction, Heat and Gas supply and Energy supply" of the Saratov State Agrarian University (Protocol No. 21 of 28.03.18).
2.6. Transport (air, railway, sea and motor transport)
128. Д10-19/70806
Алексеенко, В. Г. Основы теории надёжности: теория и практика : учебное пособие / В. Г. Алексеенко, О. В. Казанников ; Министерство науки и высшего образования Российской Федерации, Тихоокеанский государственный университет. – Хабаровск : Изд-во ТОГУ, 2019. – 147 с. – ISBN 978-5-7389-2974-8. – Текст : непосредственный.
Abstract: The work is a comprehensive publication consisting of two parts. The first part of the manual outlines the basic concepts and definitions of reliability, friction and wear of mechanisms necessary for students to master the course "Fundamentals of Reliability Theory", the provisions of which are widely used in organizations for the maintenance and repair of motor vehicles at motor transport enterprises and car maintenance stations. The methods of selection of process fluids used in modern cars are given, recommendations on the definition of antifriction materials are given and their impact on the technical condition of motor vehicles is analyzed. The necessary reference materials are offered. The second part includes 5 laboratory works performed during the study of the discipline. The publication is intended for students of the training direction 23.03.03 "Operation of transport and technological machines and complexes" of all forms of training and for specialists of motor transport enterprises and service stations involved in improving the reliability and durability of vehicles.
129. Д10-18/67317
Барышников, С. О. Надёжность механизмов и корпусов судов : монография / С. О. Барышников, Л. И. Погодаев, В. Б. Чистов ; Федеральное агентство морского и речного транспорта, Государственный университет морского и речного флота имени С. О. Макарова, Институт водного транспорта. – Санкт-Петербург : Изд-во ГУМРФ им. С. О. Макарова, 2018. – 251 с. – ISBN 978-5-9509-0320-5. – Текст: непосредственный.
Abstract: In the monograph, on the basis of a unified structural and energy approach, for the first time, the theoretical and practical aspects of wear resistance and durability of a wide range of materials, coatings and machine parts are most fully summarized. The contribution of domestic and foreign scientists to the development of a new promising scientific direction – forecasting the reliability of machines and mechanisms is noted and a number of examples of successful solutions to problems of increasing the resource of specific equipment are given.
130. Д10-20/79064
Башуров, Б. П. Функциональная надёжность элементов энергетического комплекса судовых установок / Б. П. Башуров, Д. Б. Башуров. – Санкт-Петербург : Заневская площадь, 2020. – 435 с. – ISBN 978-5-6043417-4-2. – Текст: непосредственный.
Abstract: The monograph shows the mutual connection of the elements of the energy complex of ship installations. Their functional reliability was evaluated. Mathematical models of forecasting are presented. The ways of ensuring functional reliability at the final stage of the "life cycle (operation)" are considered. The monograph is intended for researchers and postgraduates. The materials of the monograph can be used by the engineering and technical personnel of ship companies. specialists of design organizations at the initial stage of the "life" cycle (design)" when developing and creating new marine equipment by students of higher educational institutions of water transport.
131. Ж2-20/69923
Белов, О. А. Основы управления судовым электроприводом : учебное пособие / О. А. Белов ; Камчатский государственный технический университет (Петропавловск-Камчатский). – Петропавловск-Камчатский : КамчатГТУ, 2020. – 120, [2] с. – ISBN 978-5-328-00409-1. – Текст: непосредственный.
Abstract: The textbook is intended for cadets and students of the specialty "Operation of ship electrical equipment and automation equipment" in the academic discipline "Ship electric drives". The manual discusses the elements of the theory and calculation of automated electric drives, the principles of control automation and standard schematic diagrams of shipboard electric drives, elements of electric drive design, as well as issues of reliability and high-quality operation. The textbook is compiled in accordance with the requirements for the development of the basic educational program in the specialty "Operation of ship electrical equipment and automation equipment" of the federal state educational standard.
132. Д10-18/63561
Белоковыльский, А. М. Надёжность автомобильного транспорта / А. М. Белоковыльский ; Министерство образования и науки Российской Федерации, Пензенский государственный университет архитектуры и строительства (ПГУАС). – Пенза : Изд-во ПГУАС, 2018. – 170 с. – ISBN 978-5-9282-1530-9. – Текст: непосредственный.
Abstract: Theoretical information about the reliability of road transport and its constituent properties is given. The methods of application of provisions concerning reliability and its properties, as well as solving practical problems for determining and evaluating reliability indicators of motor vehicles are described. The monograph was prepared at the Department of "Operation of motor transport" and is intended for full-time, evening and correspondence students of the directions of training 23.03.03, 23.04.03 "Operation of transport and technological machines and complexes", for students of other areas of training, and can also be useful to the teaching staff and engineering and technical workers associated with the automotive by transport.
133. Д10-19/67954
Бордюг, А. С. Обеспечение процессов надёжности судового малооборотного дизельного двигателя в условиях дестабилизирующих воздействий : монография / А. С. Бордюг. – Ульяновск : Зебра, 2019. – 67 с. – ISBN 978-5-6042827-3-1. – Электронная копия доступна на сайте Научной электронной библиотеки eLIBRARY. – URL: https://www.elibrary.ru/item.asp?id=37714210 (дата обращения: 21.07.2022). – Access mode: for authorization. users.
Abstract: The monograph is intended for cadets mastering the basic educational programs in the specialty of higher and secondary vocational education on 26.05.07 (26.02.06) "Operation of ship electrical equipment and automation equipment" and bachelor's degree courses on 13.03.02 "Electric power engineering and electrical engineering" (profile "Electrical equipment and automation of ships"), 26.05.06 "Operation of ship power plants". Recommended by the Maritime Faculty of the Federal State Budgetary Educational Institution of Higher Education "Kerch State Marine Technological University" as a textbook for students of the basic educational programs of higher education in the specialty 26.05.07 "Operation of ship electrical equipment and automation equipment" and the direction of training 13.03.02 "Electric power and electrical engineering".
134. Долгин, В. П. Надёжность технических систем : учебное пособие / В. П. Долгин, А. О. Харченко. – Москва : Вузовский учебник : ИНФРА-М, 2018. – 167 с. – ISBN 978-5-9558-0430-9. – URL: https://znanium.com/catalog/product/944892 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook discusses the theory and reliability indicators of technical objects on the example of technological and automotive systems. Evaluation methods and specially selected examples of calculations on the reliability of machines make it possible to effectively use computers to solve various computational problems. The manual is intended for students of higher educational institutions studying in the areas of "Operation of transport and technological machines and complexes", "Design and technological support of machine-building industries", as well as for engineering and technical workers and designers of technical systems for various purposes.
135. Д10-20/83024
Грани научного творческого поиска обеспечения надёжности летательных аппаратов : монография / В. И. Муравьёв, П. В. Бахматов, А. И. Евстигнеев, Э. А. Дмитриев ; Министерство науки и высшего образования Российской Федерации, Комсомольский-на-Амуре государственный университет. – Владивосток : Дальнаука, 2020. – 578 с. – ISBN 978-5-8044-1700-1. – Текст : непосредственный.
Abstract: The book provides an overview of the research carried out during the introduction of structural materials from steels and alloys in serial aircraft construction in the Far East by specialists of KnAAZ named after Yu. A. Gagarin, KnAGU since the construction of the aircraft factory in Komsomolsk-on-Amur and to the present. The role of the university in the training of local highly qualified specialists and scientists to solve the problems of serial production of high-quality and reliable products and structures of aircraft, as well as the latest and promising technological processes for the manufacture of aircraft structures is shown. For a wide range of readers, namely for university employees, specialists, researchers dealing with the history and technology of aircraft construction.
136. Д10-18/63263
Григорьев, А. В. Надежность и ресурс технических систем в экстремальных условиях эксплуатации Арктики и Субарктики. Железнодорожный транспорт / А. В. Григорьев, В. В. Лепов ; Российская академия наук, Сибирское отделение, Институт физико-технических проблем Севера имени В. П. Ларионова. – Новосибирск : Изд-во Сиб. отд-ния Рос. акад. наук, 2018. – 112с. – ISBN 978-5-6040988-4-4. – Текст : непосредственный.
Abstract: This monograph introduces the reader to the concept of damage accumulation in materials and structures (damage mechanics), contains the results of experimental studies of the mechanical properties of wheel steel and the identification of features of defects that occur during the operation of railway equipment in extreme climatic conditions of the Russian Arctic and Subarctic, as well as relevant theoretical models and practical techniques. For the first time, the relations linking the change in the dynamic strength of steel at low temperatures with the accelerated accumulation of damage were obtained, and a methodology for assessing damage and resource from climatic data was proposed, which makes it possible to apply the developed approaches for any regions of the Earth and other planets with extreme operating conditions. Specific recommendations on the application of the developed methodology are given and methods for increasing the resource of railway wheels are proposed. The book is intended for specialists in the field of strength and resource assessment, ensuring the safety of operation of technical systems and complexes in extreme conditions, as well as for students and postgraduates – physicists, mechanics, miners, builders specializing in the development of regions with extreme climatic conditions, modeling processes and systems designed for operation in the Arctic and Subarctic.
137. Д10-20/81682
Зиновьев, В. Е. Совершенствование способов управления жизненным циклом наземных транспортных средств в процессе эксплуатации : монография / В. Е. Зиновьев, И. М. Алексаньян, Р. В. Каргин ; РОСЖЕЛДОР, Ростовский государственный университет путей сообщения (ФГБОУ ВО РГУПС). – Ростов-на-Дону : РГУПС, 2020. – 121 с. – ISBN 978-5-907295-01-8. – Текст : непосредственный.
Abstract: The monograph is devoted to the methods of managing the life cycle of ground vehicles during operation. The factors (external environment, physical and mechanical properties of materials, operating mode and external care, maintenance and repair, software updates) affecting the life cycle, as well as the consequences of the impact are presented. The existing and improved structural, operational and technological measures to improve the quality, efficiency, durability, reliability of vehicles are summarized and presented.
138. Д10-18/66217
Исаенко, В. Д. Основы теории надёжности технических систем (Автомобильный транспорт) : учебное пособие / В. Д. Исаенко, П. В. Исаенко, А. В. Исаенко ; Министерство науки и высшего образования Российской Федерации, Томский государственный архитектурно-строительный университет. – Томск : Изд-во ТГАСУ, 2018. – 207 с. – ISBN 978-5-93057-864-5. – Текст : непосредственный.
Abstract: This manual discusses the patterns and causes of changes in the technical condition of vehicles during operation. The theoretical and practical bases for assessing the reliability of vehicle aggregates according to standard parameters, taking into account the regularities of the distribution of random variables and international quality standards ISO 9000 series, are presented. The issues of assessing the reliability of individual components and systems of motor vehicles and some episodes of operation and repair and restoration production are considered. It is intended for university students studying in the bachelor's degree program 23.03.03 "Operation of transport and technological machines and complexes" of the orientation 23.03.03.01 "Automotive industry and automotive service" when studying the discipline B1. B.23 "Fundamentals of reliability theory".
139. Д10-20/88047
Исследование влияния конструктивных особенностей на прочность и надёжность авиационных конструкций : учебное пособие к расчетно-графическим и лабораторным работам / А. А. Зотов, А. В. Бабайцев, Н. В. Ушаков, А. Н. Волков; под редакцией А. А. Зотова ; Министерство науки и высшего образования Российской Федерации, Московский авиационный институт (национальный исследовательский университет). – Москва : Изд-во МАИ, 2020. – 96 с. – ISBN 978-5-4316-0770-7. – Текст : непосредственный.
Abstract: The textbook is intended for practical and laboratory classes and independent work of students of aviation universities studying the discipline "Structural strength". The presented tasks make it possible to give a comparative analysis of the results of calculations using modern software systems and traditional engineering methods on concrete practical examples, to study the currently used experimental methods of strength studies and non-destructive testing. Examples of solving typical tasks are given.
140. Д10-18/62173
Климовские чтения – 2018. Перспективные направления развития авиадвигателестроения : сборник докладов Научно-технической конференции / ОДК Климов. – Санкт-Петербург : Скифия-принт, 2018. – 417 с. : ил. – Загл. обл. : Научно-техническая конференция "Климовские чтения – 2018. Перспективные направления развития авиадвигателестроения". – ISBN 978-5-98620-318-8. – Текст : непосредственный.
Abstract: The collection of articles combines the works of participants of the international scientific and technical conference "Klimov Readings - 2018. Promising areas of development of aircraft engine building". Klimov readings are traditionally devoted to topical issues of modern aircraft engine building, reflected in the research of employees of scientific, industrial and scientific-production organizations.
141. Д10-18/60655
Костюничев, Д. Н. Теория надёжности и оценка ресурса ПТМ : учебное пособие / Д. Н. Костюничев, Н. С. Отделкин ; Волжский государственный университет водного транспорта (Нижний Новгород), Кафедра подъёмно-транспортных машин и машиноремонта. – Нижний Новгород : ВГУВТ, 2018. – 75, [1] с. – Текст : непосредственный.
Abstract: The basics of the theory of diagnostics are outlined in a brief form. The methodology of execution and tasks for practical work on the assessment of the technical condition of parts and assemblies of lifting machines are given. The bibliographic list contains all the necessary reference materials. For full-time and part-time students performing practical and laboratory work on the discipline "Fundamentals of reliability theory".
142. Д10-19/73789
Марчуков, Е. Ю. Динамическая стабильность и надёжность роторов газотурбинных двигателей / Е. Ю. Марчуков, Ю. Б. Назаренко. – Москва : Издатель Назаренко Юрий Борисович, 2019. – 210 с. – ISBN 978-5-9906088-5-6. – Текст : непосредственный.
Abstract: The presented monograph presents the results of many years of research by the authors in the field of analysis of the dynamic behavior of gas turbine engine rotors having inter-rotor bearings in their design and structural methods for increasing the dynamic stability of rotors. The analytical calculation of the critical rotation frequencies of the rotors is based on the use of simplified equivalent models that allow to reduce a multi-disc rotor to a system with one degree of freedom and apply them to study the first bending shape of the rotor vibrations. The cases of dynamic behavior of rotors, as in synchronous' so it is with an out-of-sync procession, as well as taking into account the malleability of elastic supports. A new concept is presented for determining the critical frequencies of rotors by modal analysis, which can be performed on simplified flat finite element models, which significantly simplifies and reduces the calculation time. The study of the unconventional behavior of rotors in the event of plane vibrations in rotating rotors, previously initiated by the authors, is continued and a number of technical solutions for the passage and safe operation of aircraft engines at critical rotational frequencies are proposed. One of the main features of the operation of engines at maximum operating conditions is that over time, with minimal reserve coefficients, plastic deformations and weakening of individual rotor assemblies occur. The mechanism of occurrence of plastic deformations in the coupling elements of the package of rear disks of a high-pressure compressor is considered and the effect of weakening at the joints of the rotor nodes and axial connections between the disks on the critical rotational speeds of the rotors is estimated. The book is of interest to design engineers working in the Design Bureau and at gas turbine enterprises. In addition, the book may be useful to students, postgraduates and researchers working in the field of studying the dynamics of multivalent systems.
143. Ж2-21/71721
Никольская, Э. Н. Наше время и моя судьба. Жизнь и труд инженера / Э. Н. Никольская. – Москва : Издатель Т. Н. Никольская, 2021. – 383 с. – ISBN 978-5-600-03099-2. – Текст : непосредственный.
Abstract: You will read about the difficult but fascinating everyday life of engineers, for whom the safety of railway transport was their life's work, about episodes of work to ensure the reliability of structures – from innovative calculations to the most complex bench tests of components and locomotive tests on trips thousands of kilometers from edge to edge of our big country, about how difficult technical tasks were solved in cooperation with the collectives of factories, institutes, railway depots, specialists of the COMECON countries. This is a story about the life and work in that difficult time of a man who knew how to search and find new things, fight for the truth, appreciate and love people.
144. Д10-18/59487
Обеспечение прочности композитных авиационных конструкций с учетом случайных эксплуатационных ударных воздействий / Ю. М. Фейгенбаум [и др.]. – Москва : ТЕХНОСФЕРА, 2018. – 505 с. – ISBN 978-5-94836-525-1 – Текст : непосредственный.
Abstract: The book is the first Russian monograph that systematically sets out both the methodology for ensuring the strength of composite structures, taking into account the impact impacts possible in operation, and the results of practical research carried out within the framework of this methodology.
145. Д10-18/57229
Повышение эксплуатационной надёжности и экологической безопасности автомобильного транспорта / Д. В. Стенин [и др.] ; Кузбасский государственный технический университет имени Т. Ф. Горбачёва. – Кемерово : КузГТУ, 2018. – 215 с. – Текст : непосредственный.
Abstract: Scientific research aimed at improving the operational reliability and environmental safety of road transport is presented.
146. Д10-20/82808
Прогрессивные технологии, применяемые при ремонте железнодорожного подвижного состава : сборник трудов национальной научно-технической конференции студентов, магистрантов, аспирантов и молодых ученых, Санкт-Петербург, 29 ноября 2019 года / Федеральное агентство железнодорожного транспорта, Петербургский государственный университет путей сообщения Императора Александра I (ФГБОУ ВО ПГУПС) ; редакционная коллегия: А. А. Воробьев (гл. редактор) [и др.]. – Санкт-Петербург : ПГУПС, 2020. – 239 с. – ISBN 978-5-7641-1498-9. – Текст : непосредственный.
Abstract: The collection presents the results of theoretical and experimental studies of technologies used in the manufacture and operation of rolling stock, during repair in depot and factory conditions, which significantly improve the operational properties, reliability and quality of repair of locomotives, passenger and freight cars, as well as motor car sections of metro and tram rolling stock. The conference was held in accordance with the comprehensive plan of the Department "Technology of Metals" for the scientific and educational work of students, postgraduates and within the framework of the work of the SS "Improving the durability of rolling stock parts". It is intended for students, teachers and all interested persons.
147. Ж2-20/69520
Прочность и надёжность газотурбинных двигателей : сборник научных трудов / Государственный научный центр РФ "Центральный институт авиационного моторостроения имени П. И. Баранова" ; под редакцией Ю. А. Ножницкого. – Москва : ЦИАМ, 2020. – 275 с. – ISBN 978-5-94049-051-7. – Текст : непосредственный
Abstract: The collection contains the results of research in the field of dynamics, strength and reliability of gas turbine engines obtained at CIAM in recent years. The articles devoted to the improvement of methods for ensuring and confirming the strength and reliability of aircraft engines, optimization of structural and technological solutions, including the use of composite materials and additive technologies, are presented. The collection is intended for engineering and technical specialists and researchers employed in aerospace and related industries, for senior students of specialized universities and graduate students.
148. Д10-20/78643
Склярова, А. А. Эффективность и надёжность процессов и технологий при эксплуатации наземных транспортно-технологических машин : монография / А. А. Склярова, А. П. Щербаков, Е. В. Куракина ; Санкт-Петербургский государственный архитектурно-строительный университет. – Санкт-Петербург : Петрополис, 2020. – 186 с. – ISBN 978-5-9676-1191-9. – Текст : непосредственный.
Abstract: Currently, the road construction industry is developing dynamically and requires constant updating of experience and reorganization of road construction works. The use of new technologies, including trenchless development of soil, improvement of complex mechanization of works, research of factors influencing the efficiency of ground transport and technological machines are the main directions of development of earthworks. Based on the analysis of work production technologies; the substantiation of the approach to the compilation of sets of transport and technological machines, determining the priority factors influencing the reliability and efficiency of ground transport and technological machines, allowed us to develop a model for the integrated assessment of the effectiveness of ground transport and technological machines in trenchless soil mining in particular, as well as an algorithm for selecting parameters for the integrated assessment system. The results obtained are the basis for further research in the field of soil development, and also play an important role in the road construction complex of St. Petersburg, as they are already applicable in practice today, they allow reducing the cost and timing of work, improving the quality, productivity and safety of the organization of the workflow. The state of the issue of passive ferroconde control and evaluation of the stress-strain state of welded metal structures of ground transport and technological machines, taking into account the kinetics of the development of corrosion damage, is presented. The factors influencing the development of corrosion processes are considered, the classification of types and types of corrosion, corrosion wear is given.
149. Д10-19/75270
Сливинский, Е. В. Пути повышения эксплуатационной надёжности тяговых и прицепных рельсовых и безрельсовых транспортных средств : монография / Е. В. Сливинский, С. Ю. Радин ; Министерство науки и высшего образования Российской Федерации, Елецкий государственный университет им. И. А. Бунина. – Елец : Елецкий гос. ун-т им. И. А. Бунина, 2019. – 185 с. – ISBN 978-5-00151-092-5. – Электронная копия доступна на сайте Научной электронной библиотеки eLIBRARY. – URL: https://www.elibrary.ru/item.asp?id=41859195 (дата обращения: 21.07.2022). – Access mode: for authorization. users.
Abstract: The monograph contains the results of theoretical research, as well as a description of promising technical solutions in the field of improving the design of locomotives and wagons to increase the durability of their running gear, as well as the reliability of automobile trains. Examples of numerical calculations to determine the rational geometric and kinematic parameters of the proposed structures are given. It is intended for researchers and engineers engaged in the research and design of rail and trackless vehicles, as well as teachers, graduate students and students of technical universities, technical schools, and colleges of transport orientation.
150. Д10-19/72956
Фомин, А. И. Эксплуатационная надёжность автомобилей, агрегатов и систем : учебное пособие / А. И. Фомин, Е. А. Нуянзин ; Министерство науки и высшего образования Российской Федерации, Национальный исследовательский Мордовский государственный университет им. Н. П. Огарёва. – Саранск : [б. и.], 2019. – 111 с. – ISBN 978-5-98344-586-4. – Электронная копия доступна на сайте Научной электронной библиотеки eLIBRARY. – URL: https://www.elibrary.ru/item.asp?id=42562810 (дата обращения: 21.07.2022). – Access mode: for authorization. users.
Abstract: The fundamentals of the theory of reliability of technical systems, basic concepts, definitions and criteria of operational reliability are described, general methods for calculating the reliability of systems are considered. It is intended for students of all forms of education enrolled in higher education programs in the direction of 23.03.03, 23.04.03 "Operation of transport and technological machines and complexes".
151. Д10-18/63997
Бондаренко, Ю. А. Надёжность и диагностика технологических систем : учебное пособие / Ю. А. Бондаренко, М. А. Федоренко, Т. М. Санина ; Министерство образования и науки Российской Федерации, Белгородский государственный технологический университет им. В. Г. Шухова. – Белгород : Белгор. гос. технол. ун-т (БГТУ) им. В. Г. Шухова, 2018. – 122 с. – Электронная копия доступна на сайте Научной электронной библиотеки eLIBRARY. – URL: https://www.elibrary.ru/item.asp?id=35461532 (дата обращения: 21.07.2022). – Access mode: for authorization. users.
Abstract: A textbook for the implementation of practical work for the preparation of masters in the direction of 15.04.05 "Design and technological support of machine-building industries".
152. Д10-19/70375
Боряев, А. А. Работоспособность технических систем : учебное пособие / А. А. Боряев. – Санкт-Петербург : Трактат, 2019. – 145 с. – Текст: непосредственный.
Abstract: The proposed textbook on the operability of technical systems and diagnostics is intended for students studying in the following specialties: 23.04.03 "Operation of transport and technological machines and complexes", 23.05.01 "Ground transport and technological means"; 23.03.03 "Operation of transport and technological machines and complexes". The book outlines the main methods of reliability research, some methods for evaluating and optimizing the reliability of machine components and aggregates. In addition, information about the essence of the phenomena occurring in the surface layers of the metal of the engine during friction is summarized, the influence of the physical and mechanical properties of the surface layer of metal, geometric parameters of surface quality on the wear resistance of parts is considered, and measures are described that increase the reliability and durability of the engine interfaces. Technical and economic methods of assessing the durability and reliability of aggregates are considered. The information on diagnostics of electronic systems of the car is given. The book can be useful for engineering and technical employees of standardization and reliability services, as well as for employees of design organizations and industrial enterprises dealing with the reliability and durability of mechanical engineering products.
153. Гетьман, А. А. Оценка надёжности технологического процесса изготовления литых деталей : монография / А. А. Гетьман. – Санкт-Петербург : Лань, 2020. – 192 с. – ISBN 978-5-8114-5142-5. – URL: https://e.lanbook.com/book/143244 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: For the first time in the book, based on the conducted research, the relationship between the design of the part, its crystallization processes, structure, mechanical properties and, ultimately, reliability during operation is established. Practical recommendations for the construction of cast parts made of steel, high-strength cast iron, aluminum and magnesium alloys used in modern machines and devices are proposed. The monograph is intended for the preparation of students of higher educational institutions studying in the fields of "Mechanical Engineering", "Technological machines and equipment", "Design and technological support of machine-building industries" (master's degree level), "Design and construction of ships, vessels and ocean engineering facilities" (specialty level), "Mechanical Engineering", "Engineering and shipbuilding and water transport technologies" (postgraduate level). It will also be useful for engineering and technical workers of machine-building and shipbuilding enterprises, research institutes and design bureaus.
154. Головин, В. И. Надёжность электроинструмента на примере сверлильных машин : монография / В. И. Головин, О. А. Харченко. – М. : Вузовский учебник : ИНФРА-М, 2018. – 146 с. – (Научная книга). – ISBN 978-5-9558-0465-1. – URL: https://znanium.com/catalog/product/960012 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The issues of increasing the reliability of the process of drilling deep holes using power tools are considered. The main problems of hole processing and the features of the deep hole drilling process are outlined. The methods of assessing the reliability of machining processes and technological equipment are analyzed. The morphological analysis apparatus is used to solve the problem of synthesis of a rational variant of the power tool system. Based on a machine experiment, the evaluation of the system structures was carried out. The book is intended for specialists working in the field of mechanical engineering, teachers and students of technical universities.
155. Д10-18/60946
Дежаткин, М. Е. Основы повышения надёжности машин при оптимизации ремонтно-обслуживающих воздействий : монография / М. Е. Дежаткин, В. В. Варнаков, Д. В. Варнаков ; Ульяновский государственный аграрный университет. – Ульяновск : УлГАУ, 2018. – 176 с. – Текст : непосредственный.
Abstract: The monograph summarizes the results of research in the field of reliability of machines in the optimization of repair and maintenance impacts, presents a technical justification for improving the reliability of machines in the optimization of repair and maintenance impacts, suggests methods of experimental research to improve the reliability of machines in the optimization of repair and maintenance impacts, the substantiation of the optimal complex of works on the technical service of combine harvesters, taking into account their reliability under leasing conditions, with recommendations for carrying out works on the technical service of combine harvesters when leasing them, taking into account the level of technical service of the lessee and the results of assessing the quality of spare parts supplies when organizing the technical service of machines.
156. Зубарев, Ю. М. Технологическое обеспечение надёжности эксплуатации машин : учебное пособие / Ю. М. Зубарев. – 2-е изд., стер. – Санкт-Петербург : Лань, 2021. – 320 с. – ISBN 978-5-8114-2100-8. – URL: https://e.lanbook.com/book/169224 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The book discusses issues related to the wear resistance, strength and durability of machine parts. The classification of various types of wear on the surfaces of parts, various types of static and dynamic strength, related performance, durability and reliability in operation is given. The analysis of the influence of the technological parameters of the machining of machine parts, the type and geometry of the cutting tool on the wear resistance, strength and durability of their operation, i.e. on the reliability of the machine or mechanism. The textbook is intended for senior students of engineering specialties of universities and colleges. It will be useful for undergraduates and postgraduates, as well as employees of machine-building enterprises, design institutes and research institutes.
157. Д10-18/62268
Конструирование, использование и надёжность машин сельскохозяйственного назначения = Designing, use and reliability agricultural machines destination : сборник научных работ / Министерство сельского хозяйства Российской Федерации, Брянский государственный аграрный университет ; [ответственный редактор – С. А. Феськов]. – Брянск : Брян. ГАУ, 2018. – 260 с. – ISBN 978-5-88517-169-4. – Текст : непосредственный.
Abstract: The collection contains the results of scientific research by scientists of the BGAU and other universities of the Russian Federation and CIS countries. The presented works consider the issues of: creation and rational use of agricultural machinery; development of technologies for the restoration of parts that increase the durability of agricultural machinery; electrification and automation of enterprises; economic problems of engineering service and safety in technology.
158. Надёжность технических систем и техногенный риск : учебное пособие / составители С. А. Сазонова, С. А. Колодяжный, Е. А. Сушко. – DOI: https://doi.org/10.23682/108311. – Москва : Ай Пи Ар Медиа, 2021. – 147 c. – ISBN 978-5-4497-1147-2. – URL: https://www.iprbookshop.ru/108311.html (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook discusses the concept of risk as a measure of danger and the concept of reliability of technical systems and industrial safety as an integral part of technogenic safety. The basic terms and definitions of reliability of technical systems are given, the main hazards of technical systems are indicated, the relevance of the security problem from the point of view of its socio-economic significance is substantiated. The main provisions of the theory of reliability of technical systems and technogenic risk, as well as modern methods of risk management are presented. Examples of calculating tasks are given. The textbook is intended for students studying in the field of training 20.03.01 "Technosphere safety" and specialty 20.05.01 "Fire safety", studying the discipline "Reliability of technical systems and technogenic risk".
159. Обеспечение надёжности сложных технических систем : учебник / А. Н. Дорохов, В. А. Керножицкий, А. Н. Миронов, О. Л. Шестопалова. -3-е изд., стер. – Санкт-Петербург : Лань, 2021. – 352 с. – ISBN 978-5-8114-1108-5. – URL: https://e.lanbook.com/book/167412 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The complex characteristics of complex technical systems used at various stages of their life cycle are considered. Approaches to the definition and assessment of the technical condition are shown, some methods of its control, diagnosis and forecasting, obtaining information about the technical condition and testing of systems are given. The issues of ensuring the reliability of technical systems at the operational stage are considered. It is intended for students studying in the fields of "Instrument Engineering", "Optotechnics", "Photonics and optoinformatics" and specialty "Devices and systems of radiation energy". It will be useful to specialists, graduate students and researchers in the field of reliability of complex technical systems.
160. Остяков, Ю. А. Проектирование механизмов и машин: эффективность, надёжность и техногенная безопасность : учебное пособие / Ю. А. Остяков, И. В. Шевченко. – М. : ИНФРА-М, 2018. – 260 с. – DOI: www.dx.doi.org/10.12737/18536. – ISBN 978-5-16-011108-7. – URL: https://znanium.com/catalog/product/938022 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The methodology of modern design based on innovations and marketing research to ensure the competitiveness of the developed mechanisms and machines is described. The design process from the development of a business plan to the verification of the project, the method of preliminary failure analysis and calculation of reliability and safety of mechanisms and machines necessary for the design and evaluation of the competitiveness of mechanisms and machines on a scientific basis are considered. Meets the requirements of the Federal State Educational Standard of Higher Education of the latest generation. For students of engineering specialties of universities, teachers, specialists, as well as anyone interested in efficiency, reliability and technogenic safety.
161. Д10-19/73720
Повышение надёжности гусеничных тракторов класса 3 за счет комплексных воздействий при эксплуатации : монография / Г. И. Жидков, А. Г. Жутов, С. П. Коблов, А. Ю. Попов ; Министерство сельского хозяйства Российской Федерации, Департамент научно-технологической политики и образования, Волгоградский государственный аграрный университет. – Волгоград : Волгоградский ГАУ, 2019. – 171 с. – ISBN 978-5-4479-0212-4. – Текст : непосредственный.
Abstract: Based on many years of research, improving the reliability of a class 3 tracked tractor, theoretical and practical solutions are proposed to increase the reliability of tractors during operational tests (up to 3000 hours) in the farms of the Volgograd region. The results of experimental studies are presented. For agricultural production specialists, researchers, postgraduates and students of agricultural universities.
162. Погонин, А. А. Кинематический расчет и надёжность проектируемого металлорежущего станка : учебное пособие / А. А. Погонин, И. В. Шрубченко, М. Н. Воронкова. – 4-е изд., доп. – Москва : ИНФРА-М, 2020. – 158 с. – (Высшее образование : Бакалавриат). – ISBN 978-5-16-109370-2. – URL: https://znanium.com/catalog/product/1228348 (дата обращения: 21.07.2022). – Access mode: for authorization. users. – Text : electronic.
Abstract: The textbook discusses methodological approaches to the selection and calculation of the main technical characteristics of the designed machine. These methods are given in relation to the main groups of machines. The issues of classification of movements in machine tools and kinematic structural schemes of machine tools with different types of structures are considered. Attention is paid to the kinematic calculation of gearboxes and feeds of metal-cutting machines, as well as issues of machine reliability, reliability design, the necessary parameters are given. The first edition was published in 2000 . under the title "Justification of technical characteristics and kinematic calculation of the designed metal-cutting machine". It is intended for university students studying the disciplines "Equipment of machine-building production", "Metal-cutting machines", as well as for course and qualification work on metal-cutting machines.
163. Ж2-21/70544
Прикладные задачи конструкционной прочности и механики разрушения технических систем / В. В. Москвичев, Н. А. Махутов, Ю. И. Шокин [и др.] ; Российская академия наук, Сибирское отделение, Федеральный исследовательский центр информационных и вычислительных технологий, Красноярский филиал. – Новосибирск : Наука, 2021. – 795 с. – ISBN 978-5-02-038832-1. – Текст : непосредственный.
Abstract: The monograph discusses the general formulation of the problems of strength, resource, reliability and safety of technical systems. The results of studies of the cause-and-effect complex of failures of accidents, defects, limit states and reserve coefficients of structural elements, criteria of deformation and fracture mechanics, reliability theory and risk analysis are presented. The long-term experience of solving applied problems and scientific and technical problems of designing, calculating and operating technical systems for various purposes is reflected: welded structures, pressure vessels and pipelines, storage tanks for petroleum products, lifting and transport machines, excavating and mining equipment, structural elements of aviation and space technology, hydraulic structures, equipment of northern execution for the regions of Siberia and the Arctic.
164. Рыков, В. В. Надёжность технических систем и техногенный риск : учебное пособие / В. В. Рыков, В. Ю. Иткин. – Москва : ИНФРА-М, 2020. – 192 с. – (Высшее образование). – ISBN 978-5-16-010958-9. – Text : electronic. – URL: https://znanium.com/catalog/product/1124984 (дата обращения: 21.07.2022). – Access mode: for authorization. users.
Abstract: This textbook has been prepared on the basis of the summary of the course of lectures of the same name, given for a number of years by one of the authors to students of the specialty "Safety of technological processes and production" of the Gubkin Russian State University of Oil and Gas (National Research University). The course reflects three main areas related to technogenic safety and technological risks – elements of reliability theory, elements of general risk theory and the basics of insurance mathematics. The reader is required to prepare a general mathematics course for a technical university. The necessary additional information is provided in the manual. Despite the fact that the main text is intended for bachelors of the specialty, the manual can also be used in the preparation of undergraduates and postgraduates of various engineering specialties, in which courses related to reliability and risks are studied.
165. М/73388/1
Сидоров, А. В. Управление отказами оборудования : [в 2 ч.] / А. В. Сидоров, В. А. Сидоров. – Санкт-Петербург : ТОИР ПРО, 2019. Ч. 1 : Расследование и учет. – 2019. – 127 с. – ISBN 978-5-6043417-2-8. – Текст : непосредственный.
Abstract: This publication is devoted in two parts to the issues of equipment failure management from the point of view of ensuring the sustainable development of an industrial enterprise. Equipment failures are considered as feedback in the production asset management system. Based on an integrated approach, knowledge is systematized and deepened, methodological and practical skills in equipment failure management are expanded. For technical managers and specialists of industrial enterprises, as well as all those whose field of activity includes the need to deal with equipment failures. The first part of the publication is devoted to the consideration of issues of investigation and accounting of equipment failures in an industrial enterprise.
166. Д10-19/72781
Сутягин, А. Н. Расчёты надёжности и долговечности в технологии машиностроения : учебное пособие / А. Н. Сутягин, М. А. Ганзен ; Министерство науки и высшего образования Российской Федерации, Рыбинский государственный авиационный технический университет имени П. А. Соловьева. – Рыбинск : РГАТУ имени П. А. Соловьева, 2019. – 114 с – ISBN 978-5-88435-656-6. – Текст : непосредственный.
Abstract: The textbook deals with the solution of engineering and scientific problems arising during the technological preparation of production in mechanical engineering: calculation of indicators of reliability of technological processes, evaluation of the durability of elements of technological systems (resource forecasting, rationing of spare parts consumption). In addition to theoretical material and examples of problem solving, the textbook contains a significant number of tasks for independent practical work of students. The workshop is intended for the preparation of bachelors in the areas of 15.03.05 "Design and technological support of machine-building industries" (profile – Mechanical engineering technology) and 24.03.05 "Aircraft engines" (profile – Production technology of aviation gas turbine engines), specialists in the direction of 15.05.01 "Design of technological machines and complexes" (profile – Design of technological complexes of mechanical assembly plants) and masters in the direction of 15.04.05 "Design and technological support of machine-building industries" (profile – Technical re-equipment of machine-building enterprises).
167. Д10-19/68315
Чусов, А. Н. Надёжность и риск в техногенной среде : монография / А. Н. Чусов, А. А. Пряникова, В. В. Яковлев ; Министерство науки и высшего образования Российской Федерации, Санкт-Петербургский политехнический университет Петра Великого, Инженерно-строительный институт. – Санкт-Петербург : Политех-Пресс, 2019. – 181 с. – ISBN 978-5-7422-6523-8. – Текст : непосредственный.
Abstract: The main theoretical provisions are outlined and practical recommendations are given for solving problems of improving safety in a man-made environment based on the use of methods to improve the reliability of technical systems, probability theory, process modeling with computational examples in Mathcad and Matlab.
Online services